AVCLINK HM-4K44S Manuale utente

AVCLINK HM-4K44S 4x4 Seamless UHD matrix

AVCLINK HM-4K44S

4x4 Seamless UHD matrix

User manual

Warning

⚫Do not expose this device to Rain, Moisture, and Dripping

⚫Only use accessories specified by the manufacture

⚫Unplug this device during Lightning Storms

⚫Product specifications may be subject to technical upgrades without further

notice

AVCLINK  HM-4K44S                                                                                                                      4x4  Seamless  UHD  matrix 
 2
 
Content 
1Introduction.................................................................................................................................................. 3
2Front Panel Control ...................................................................................................................................... 3
3Rear Panel..................................................................................................................................................... 5
4RS232/LAN Control....................................................................................................................................... 6
4.1 RS232 connector............................................................................................................................... 6
4.2 Ethernet control and connection ..................................................................................................... 6
5PC tool user guide ........................................................................................................................................ 6
5.1 Account’s authentication.................................................................................................................. 6
5.2 Connect with PC tool........................................................................................................................ 6
5.3 Matrix Switch tab ............................................................................................................................. 7
5.4 Signal setting tab .............................................................................................................................. 8
5.5 Fine Tune tab.................................................................................................................................... 8
5.6 Video Wall tab .................................................................................................................................. 9
5.6.1 Video Wall Context Menu................................................................................................... 10 
Bezel Setting....................................................................................................................................... 11 
Type A Bezel Settings.......................................................................................................................... 11 
Type B Bezel Settings.......................................................................................................................... 11 
Bezel Compensation........................................................................................................................... 11 
5.6.2 Layout Save/Load ............................................................................................................... 11 
5.7 CEC control page............................................................................................................................. 12 
6Control via Web.......................................................................................................................................... 12 
7Electrical parameters.................................................................................................................................. 14 
8Package Contents ....................................................................................................................................... 14 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

AVCLINK HM-4K44S 4x4 Seamless UHD matrix

1Introduction

is a high-performance seamless UHD matrix switcher with 4x HDMI inputs and 4x HDMI outputs. Audio extract

or insert can also be enabled on this device. IR matrix routing on this video matrix is followed with video routing.

has independent audio matrix, support CEC manager and strong video wall processor

key features:

⚫Support HDMI 2.0/HDCP 2.2

⚫Support seamless switching

⚫Support video wall

⚫Support CEC manager

⚫Support Rotation 180 degree

⚫Support audio matrix

⚫Support HDMI audio extract

⚫Support external LR audio insert on HDMI stream

⚫Support EDID management

⚫HDMI video output resolution up to 3840x2160@60

⚫Front panel, RS232, TCP/IP (LAN 10M/100M) control

2Front Panel Control

Item

Description

LCD Panel

Displays the current video selections

COM

Power LED (also indicates control commands)

LOCK

Front panel lock/unlock

OUTPUT

Output selection buttons 1~4

INPUT

Input selection buttons 1~4

ALL

Set all outputs to the next input selection

RES

Set the output scaler resolution

EDID

Set the EDID options for the next input selection

Select the next available option

SAVE

Save the current matrix setting as a preset

RECALL

Set the matrix setting from a saved preset

CLEAR

Cancel the current command function

ENTER

Set the displayed option

⚫Press buttons ALL + INPUT m + TAKE by sequence, to switch input m to all the outputs

⚫Press button SAVE + OUTPUT n to save current routing/video wall scene as scene n. The maximum

available scene No. is 8

⚫Press button RECALL + OUTPUT n to recall routing scene n as current routing

AVCLINK HM-4K44S 4x4 Seamless UHD matrix

⚫Press button RES + OUTPUT n + NEXT + TAKE, to change output resolution of OUTPUT n

Resolution options:

Number

Output Resolution Setting

Number

Output Resolution Setting

3840x2160p 60Hz

1440x1050 60Hz

3840x2160p 50Hz

1366x768 60Hz

3840x2160p 30Hz

1360x768 60Hz

3840x2160p 25Hz

1280x1024 60Hz

1920x1200 60Hz

1280x768 60Hz

1920x1080p 60Hz

1280x720p 60Hz

1920x1080p 50Hz

1280x720p 50Hz

1600x1200 60Hz

1024x768 60Hz

⚫Press buttons EDID + INPUT m + NEXT + TAKE, change the EDID mode of port INPUT m

EDID options:

Number

Output Resolution Setting

Number

Output Resolution Setting

Manual

1920x1080 60Hz

3840x2160 60Hz

1280x1024 60Hz

3840x2160 30Hz

1280x720p 60H

1920x1200 60z

1024x768 60Hz

Manual EDID is loaded by PC Tool

⚫Front Lock button

The front panel control buttons can be locked to prevent accidental use or operation by unauthorized

persons. Press the LOCK button for two seconds to lock or unlock the front panel. When the panel is locked,

all buttons except the LOCK button will not function until the front panel is unlocked. The

LOCKED/UNLOCKED state is shown on the LCD panel and by the LED above the LOCK button, which is lit

when the front panel is fully LOCKED.

When the unit is UNLOCKED, press and hold down the LOCK button for six seconds - The LCD panel will

show the following (any exiting numbers indicates that those buttons are already locked):

Output: --------

Input: --------

Pressing any of the numbered Output or Input buttons will toggle the lock status of that button. The button

will become locked when the respective button number is shown on the LCD panel. When all selections

are done, press the ENTER button to set the new LOCK/UNLOCK states of those buttons.

Whenever a locked Output or Input button is activated, the LCD panel will show that the button is locked.

In this mode, the LOCK LED is not lit.

To unlock those buttons, repeat the above steps to remove the button numbers from the LCD panel before

pressing ENTER to accept the changes.

AVCLINK HM-4K44S 4x4 Seamless UHD matrix

3Rear Panel

⚫LAN (10M/100M), RS232 are for PC control

⚫Analog Audio IN/OUT ports bind to corresponding HDMI ports.

For example:

If HDMI 1 audio source is selected with External LR, then analog AUDIO IN LR1 (with phoenix connector)

will be selected to replace the embedded audio of the HDMI input 1 data stream. If HDMI 1 audio source

is selected with AUTO by PC TOOL or command, then will use the original embedded audio of input HDMI

1 as its audio data stream.

If the input is DVI signal, no matter how it is set up, system will get external analog audio input. Analog

AUDIO OUT n will always output the same audio content with HDMI OUTPUT n Analog Audio IN/OUT

connection

⚫IR IN and IR OUT

IR IN/OUT routing follows video matrix routing, no need to separately control IR matrix

IR extender connectors (not as accessories)

⚫Audio Input

4 3-way Phoenix connectors to input external analog LR audio, user can select this audio to replace

the corresponding embedded HDMI audio

⚫Audio Output

4 5-way Phoenix connectors to output balanced LR audio, and 4 mini Toslink jackets to output

analog LR audio and digital S/Pdif audio

The 4 Audio output (LR and Toslink) channels can be independent of video and switched by PC Tool

or commands

AVCLINK HM-4K44S 4x4 Seamless UHD matrix

4RS232/LAN Control

4.1 RS232 connector

⚫RS-232 control, baud rate 9600, 3-PIN Phoenix connector

TX Pin, Matrix--->PC

RX Pin, Matrix<---PC

4.2 Ethernet control and connection

Note：Factory default network setting：

5PC tool user guide

5.1 Account’s authentication

When you run the PC tool, there needs password to authenticate.

Default password of Administrator（access to all features）： 111111

Default password of User（access to all features, except OSD function）： 000000

5.2 Connect with PC tool

1. The default PC tool’s UI style as bellow

AVCLINK HM-4K44S 4x4 Seamless UHD matrix

2. User can select UART (with RS232 cable) or Network to connect, baud rate is 9600 bps

3. Default IP address, 192.168,0.247

5.3 Matrix Switch tab

1. There is a shortcut button to switch one input port to all output ports, that is Allset,

For example, switch input 1 to all outputs, user can select

AVCLINK HM-4K44S 4x4 Seamless UHD matrix

2. Recall mode：Recall an inputs/outputs routing scene which already be saved before.

The device supports maximum 8 scenes.

3. Save mode：Save current inputs /outputs routing in one index. Maximum 8 modes supported.

Note: Save/Recall button here works the same with front panel save/recall control and also the same with

Save/Load function on video wall page

4. System reset: The PC tool support reset system to recover to factory configuration.

5. Audio Switch mode: Follow Video mode or Manual mode

When select Manual mode, user can separately switch L/R (Phoenix interface) and Toslink output

User also can select to use HDMI embedded or corresponding external LR audio

6. EDID Control: Click the ‘EDID’ button on Matrix Switch page, then opens a EDID control window, then user

can do follow activity

a) Read EDID of one output port

b) Open one existing EDID file

c) Write EDID to one input port

5.4 Signal setting tab

1. Audio Select

There are two options for input Audio Select

a) Auto: If the input source is HDMI signal, system will get the embedded audio, and if the input source

is DVI signal, the system will get the corresponding analog audio

b) External: System will get the corresponding analog audio

2. Output type

There are four options for input Output Type:

A. UHD-HDMI (HDCP OFF): HDCP Off

B. UHD-DVI

C. UHD-HDCP-1.4,

D. UHD-HDCP-2.2

3. Output Resolution: Same to the description on Front Panel page

5.5 Fine Tune tab

User can read and set the brightness/contrast/saturation/sharpness of each output.

AVCLINK HM-4K44S 4x4 Seamless UHD matrix

If none special occasions, do not change the default settings

5.6 Video Wall tab

1. Use the Video Wall Setting controls to change how the displays are arranged on the Video Wall tab:

a. Adjust the Rows and Columns sliders to change the displayed screen arrangement to permit

proper Drag-and-Select of the desired screens for the video wall.

b. Change the Available slider to set how many outputs will be used for the Video Wall.

c. Click the Set button to change the Screen configuration on the Video Wall tab.

2. Use the left mouse button to drag-select the screens that will be set for video wall mode. The selected

screens will be shown as bright blue.

3. Use the right mouse button to open a menu.

4. Select Screen Stitching from the menu to program the video wall mode. The selected screens will now

be shown as bright green.

5. To change the displayed image: either use the methods detailed in the section Ошибка! Источник

ссылки не найден., or right-click to open the pop-up menu and select the desired input from the

Input Select menu option.

6. Repeating steps 2 to 5 above with a different set of outputs allows the creation of a second video wall.

However, changing the Rows, Columns and Available sliders will automatically delete the current video

wall set up when the Set button is clicked. The following example shows a more unusual video wall set-

up of two video walls with two 2x1 configurations:

AVCLINK HM-4K44S 4x4 Seamless UHD matrix

5.6.1 Video Wall Context Menu

Right clicking on any of the screen icons will display the following context menu:

Screen Stitching

This option connects the selected screens into a video wall configuration.

Cancel Stitching

Return the Video Wall configuration to normal outputs.

Screen x – Cancel

Stitching

Removes the single screen x from the video wall to allow the displaying another full frame image within the

video wall configuration, as shown in this example:

Input Select

Use the sub-menu to select the input to display on the video wall or the secondary input image shown in

the above example.

Indice

Manuali Commutatore a matrice popolari di altre marche

Broadcast Tools

Broadcast Tools SS 8.2 Manuale utente

Altimium

Altimium MATF32 Manuale utente

ALFAtron

ALFAtron ALF-MUK44N Manuale utente

Monoprice

Monoprice Blackbird 15377 Manuale utente

Kramer

Kramer XL 3216VS Manuale utente

PTN

PTN FMX12 Manuale utente

CYP

CYP nT15GX01 Manuale utente

Kramer

Kramer VP-2x2 Manuale utente

Kramer

Kramer Sierra Video 6432V5xl Manuale utente

TESmart

TESmart HMA0402A40 Manuale utente

Octava

Octava HD4XSTPMX Manuale utente

Intelix

Intelix FLX-88 Istruzioni operative

Kramer

Kramer LASSEN XL 3232S Manuale utente

Roland

Roland XS-1HD Manuale utente

Kramer

Kramer VS-66HDCPxl Manuale utente

Atlona

Atlona AT-HDMI-22M Manuale utente

Link

Link HD8X8 Manuale utente

AMX

AMX AVS-OP-2020-117 Istruzioni e ricette