Step 2: We are now preparing to transfer the magnetic stripe to the headphones
using the Avee microphone as a jig. Let the magnetic stripe be attached to the
Avee microphone, and remove the adhesive stripe protective backing from the
magnetic stripe.The magnetic stripe should stay on the Avee microphone and the
adhesive side should be facing the headphone.
Step 3:Guide the add-on to the base of the left headphone and firmly press it in
place for minimum 30 seconds. Once attached, carefully
unplug it to reveal the adhesive magnetic stripe being
transferred to the headphones.
Press firmly on the tape to ensure all edges of the tape
have adhered to the headphones.
Optimally the adhesive on the magnetic stripe needs a
24 hrs curing time.
That is all - the Avee aviation microphone is ready to
be used!
Connecting the Avee microphone to the aircraft
To start using the Avee microphone in the aircraft, follow this procedure:
1. Plug the Avee aircraft interface cable into the Avee microphone using the
angled USB connector. Use force to make the USB C connector go all the
way into the USB socket. The connection may be done in two directions –
either the cable pointing upwards – or the cable is pointing downwards.
2. Switch on the ANR on the headphones before attaching the Avee to
the headset. Please note that you will always have audio in your
headphones regardless of headphone battery level or headphones ANR
status and
The Avee microphone output is NOT affected by headphone battery power
level.
3. Attach the Avee microphone to the headset. Make sure the Avee
microphone is clamped safely to the headset.
4. Plug the Avee aircraft interface into the aircraft. Please note that the
aircraft connector might be the dual GA, Lemo Redel, Neutricon or XLR-5 –
all depending on what you have purchased from us & what is available in
your aircraft.
5. When the aircraft radio & intercom is switched on, the mic add-on will get
bias power from the aircraft. This is indicated with a steady dimmed Power
indicator light on the bottom side of the Avee microphone.
6. The internal Bluetooth®available in your headset will automatically
disconnect all units connected via Bluetooth®when the Avee microphone
is connected.
To be able to listen to music or use your phone when flying, you need the
Avee BlueLink. Check out our web pages for more info on this product.
Headphone volume setting
Adjust the headphone volume by using the Volume knob on the bottom of the
Avee microphone. Rotate clockwise for minimum volume and anti-clockwise for
maximum volume.
Please note that for most pilots the normal procedure for adjusting the
headphone volume is by setting the Avee headphone volume to maximum – and
then adjusting the volume from the aircraft audio panel.
In small GA aircrafts, the headset volume is typically adjusted individually for
pilot and co-pilot. Volume level in the left back seat is following the pilot volume
level, while the right back seat is following the level set by the co-pilot.
In this case we suggest letting the back seaters adjust the volume level to lower
level (if needed) using the volume control on the Avee microphone.
Microphone output level
The microphone output level is factory set to a normal output level, and will
usually not require adjustments.
The output level may however be set by using the Mic level adjustment knob on
the bottom side of the Avee microphone and your finger nail or the corner of a
credit card as a tool.
Level 9 is maximum and level 1 is minimum level. Factory setting level is 3.
Avoid setting the output level to high. This will make the noise cancelling microphone
in the Avee pick up unnecessary cockpit/ambient noise and the signal might saturate.
Headset mono & stereo mode
The Avee microphone is set to the mono mode (factory setting), by turning the
mono / stereo adjustment knob fully to ‘M’. To set stereo mode, turn the
adjustment knob fully to S.Please note that most aircrafts have a
mono radio & intercom system. If you set the Avee to stereo mode in an aircraft
with mono support, you will loose the sound in the right earphone.
