Avenview SW-VGA-5X5 Manuale utente
© 2010 Avenview Inc. All rights reserved.
The contents of this document are provided in connection with Avenview Inc. (“Avenview”) products. Avenview makes no
representaons or warranes with respect to the accuracy or completeness of the contents of this publicaon and reserves the
right to make changes to specicaons and product descripons at any me without noce. No license, whether express, implied,
or otherwise, to any intellectual property rights is granted by this publicaon. Except as set forth in Avenview Standard Terms
and Condions of Sale, Avenview assumes no liability whatsoever, and disclaims any express or implied warranty, relang to its
products of Avenview Inc. is strictly prohibited.
Avenview
5 In 5 Out VGA Matrix Switch with Audio
Model #: SW-VGA-5X5
Table of Contents
Secon 1: Geng Started ......................................................................................................................1
1.1 Important Safeguards..............................................................................................................1
1.2 Safety Instrucons...................................................................................................................1
1.3 Regulatory Noces Federal Communicaons Commission (FCC)............................................2
1.4 Introducon ............................................................................................................................2
1.5 Features...................................................................................................................................2
1.6 Package Contents ....................................................................................................................2
1.7 Before Installaon ...................................................................................................................3
1.8 Panel Descripon ....................................................................................................................3
1.9 Channel Control ......................................................................................................................4
Secon 2: Installaon .............................................................................................................................8
Secon 3: Specicaons.........................................................................................................................9
www.avenview.com
Avenview
1
Section 1: Getting Started
1.1 Important Safeguards
Please read all of these instructions carefully before you use the device. Save this manual for future
reference.
What the warranty does not cover
• Any product, on which the serial number has been defaced, modied or removed.
• Damage, deterioraon or malfuncon resulng from:
• Accident, misuse, neglect, re, water, lightning, or other acts of nature, unauthorized product
modicaon, or failure to follow instrucons supplied with the product.
• Repair or aempted repair by anyone not authorized by us.
• Any damage of the product due to shipment.
• Removal or installaon of the product.
• Causes external to the product, such as electric power uctuaon or failure.
• Use of supplies or parts not meeng our specicaons.
• Normal wear and tear.
• Any other causes which does not relate to a product defect.
• Removal, installaon, and set-up service charges.
1.2 Safety Instructions
The SW-VGA-5X5, Avenview 5 in 5 Out VGA Matrix Switch with Audio has been tested for conformance
to safety regulations and requirements, and has been certified for international use. However, like all
electronic equipments, the SW-VGA-5X5 should be used with care. Please read and follow the safety
instrucons to protect yourself from possible injury and to minimize the risk of damage to the unit.
• Do not dismantle the housing or modify the module.
• Dismantling the housing or modifying the module may result in electrical shock or burn.
• Refer all servicing to qualied service personnel.
• Do not aempt to service this product yourself as opening or removing housing may expose you to
dangerous voltage or other hazards
• Keep the module away from liquids.
• Spillage into the housing may result in re, electrical shock, or equipment damage. If an object or
liquid falls or spills on to the housing, unplug the module immediately.
• Have the module checked by a qualied service engineer before using it again.
• Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device
before cleaning.
www.avenview.com
Avenview
2
1.3 Regulatory Notices Federal Communications Commission (FCC)
This equipment has been tested and found to comply with Part 15 of the FCC rules. These limits are
designed to provide reasonable protecon against harmful interference in a residenal installaon.
Any changes or modifications made to this equipment may void the user's authority to operate this
equipment.
1.4 Introduction
This SW-VGA-5X5 is a 5 input 5 output commercial VGA with audio matrix switcher. The SW-VGA-5X5 is
one of the world's advanced matrix switchers. It is capable of being controlled though RS-232 via soware
included or via a third party control system. Switcher is designed to handle any resoluon up to 1920x1200
or 1080p without any signal degradaon.
This device is mainly used in broadcast rooms, mul council-chambers, television teaching rooms, command
centers and IT server rooms.
1.5 Features
- Power-fail protecon, allows switcher to restore previous sengs
- RS-232 communication control input, allows to control switcher via included advanced control
soware or third party control system
- IR remote control
- Inputs: 5 x VGA female15-pin HD, 5 x 1/8'' (3.5mm) mini audio
- Outputs: 5 x VGA female 15-pin HD, 5 x 1/8'' (3.5mm) mini audio
- Connectors: 15-pin HD (could be used for PC resoluons up to WUXGA - 1920x1200 or HDTV up to
1080p)
- Compable formats: RGB, YPbPr or RGBHV
- Rack mountable
1.6 Package Contents
Before you start the installaon of the converter, please check the package contents.
- SW-VGA-5X5 x 1
- VGA to component breakout cable x 10
- IR remote control x 1
- Power adapter (+5VDC) x 1
- 1RU rack-mount ear set x 1
- User Guide x 1
- Installaon CD x 1
www.avenview.com
Avenview
3
1.7 Before Installation
• Put the product in an even and stable locaon. If the product falls down or drops, it may cause an
injury or malfuncon.
• Don't place the product in too high temperature (over 50°C), too low temperature (under 0°C) or
high humidity.
• Use the DC power adapter with correct specicaons. If inappropriate power supply is used then it
may cause a re.
1.8 Panel Description
FRONT PANEL
2 3 4 561 8
7
1. Display of the Selected Input Channel 2. Decrease of Input Channels
3. Increase of Input Channels 4. Decrease of Output Channels
5. Increase of Output Channels 6. IR Receiver
7. Power Indicator 8. Display of the Selected Input Channel
REAR PANEL
10 12 13 149 11
9. Audio Inputs 10. Audio Outputs
11. Video Inputs 12. Video Outputs
13. 5V DC Power 14. RS232 Control Port
www.avenview.com
Avenview
4
1.9 Channel Control
Method A: Front panel push buon control
1. Use the “+” or “–“ channel buon on output port to select which port to be changed.
“+”: change selected output port in ascending order
“–“: change selected output port in descending order
2. Push the “+” or “–“ channel buon on Input channel to select the VGA input source you want to
display on this selected output port in step 1 in sequenal order. Once you reach the desired input
channel you want to display on this selected output port, leave it and the seng will be eecve in
a few seconds.
Method B: IR remote control
Please push one of the INPUT buons to choose which VGA input source you are going to setup. Aer that,
you can have mulple outputs playing the same content from the selected INPUT 1 — INPUT 5 by pushing
the corresponding OUTPUT buons. The seng will be eecve in a couple of seconds.
INPUT & OUTPUT MAPPING
INPUT 1 VGA input port #1
INPUT 2 VGA input port #2
INPUT 3 VGA input port #3
INPUT 4 VGA input port #4
INPUT 5 VGA input port #5
OUTPUT 1 VGA output port #1
OUTPUT 2 VGA output port #2
OUTPUT 3 VGA output port #3
OUTPUT 4 VGA output port #4
OUTPUT 5 VGA output port #5
www.avenview.com
Avenview
5
Method C: Soware Control via the RS-232 port
VGA input source selecon area VGA output port selecon area
Status indicator
Soware Control Menu
1. Seng buon:
Click Get buon to read back device ID.
Click Set buon to write device ID.
Click Rename buon to open the String Table.
In the String Table, assign the capons for each input and output
port for easy recognion.
Example
Rename the Input1 to “Main PC”, Input2 to “Sub PC,” input3 to
“PC-3,” … etc., and rename output1 to “Conf. RM1,” output2 to
“Main monitor,” output3 to “Lobby,” output4 to “Main projector,” … etc.
www.avenview.com
Avenview
6
2. Scan buon:
Serial Port Scan:
Click Scan buon, the machine will scan the all com port and
show them.
Select the RS232 serial port connected to the machine. And set
device ID 255 is for all device.
Only the same device id or 255 can get the command you sent.
Click OK. Get the new status from the machine you select.
3. Linkage buon:
Click Linkage buon to read back all status.
4. Open/Close buon:
Click this buon to close or open COM port.
5. Mapping buon:
Select All Output:
Select “set all output”, then select the source on main menu. You can quickly set
all output to the same source.
Unselect All Output:
Release output selecon.
Select Input1~8 - Output:
Select Input channel then select the output port.
Example
Select input source 1. Then select output port 1 and 2. The video and audio will be sent to port 1 and 2.
6. Fast Select buon:
Click Fast select buon for quick seng
Input one Output Port one
Input two Output Port two
…..
From Fast Select pull down menu:
Select Input Num-Output Num
Input source #1 Output port #1
Input source #2 Output port #2
…..
Select Input - All Output
Send the same source to all output
www.avenview.com
Avenview
7
7. Output Port:
Pull down menu and select which source to be sent to this output port.
One by one seng
On main menu screen
First select input source. Then select the output ports which you want to send the video and audio from
this source. When you select the input source, the source will change to gray. When you select the output
port one by one, the selected output port will change to gray.
The linking line will change to yellow.
Group seng
First select output ports one by one. Then select the input source. The selected output ports change the
seng at the same me.
By using Terminal:
Baud rate: 9600
Data length: 8bit
Parity check: No
Stop bit: 1
www.avenview.com
Avenview
8
Command Set:
COMMAND ACTION COMMAND ACTION
ST System Status VR Firmware Version
A1 Output A select Input 1 B1 Output B select Input 1
A2 Output A select Input 2 B2 Output B select Input 2
A3 Output A select Input 3 B3 Output B select Input 3
A4 Output A select Input 4 B4 Output B select Input 4
A5 Output A select Input 5 B5 Output B select Input 5
C1 Output C select Input 1 D1 Output D select Input 1
C2 Output C select Input 2 D2 Output D select Input 2
C3 Output C select Input 3 D3 Output D select Input 3
C4 Output C select Input 4 D4 Output D select Input 4
C5 Output C select Input 5 D5 Output D select Input 5
E1 Output E select Input 1
E2 Output E select Input 2
E3 Output E select Input 3
E4 Output E select Input 4
E5 Output E select Input 5
Section 2: Installation
Follow these instrucons for installaon of SW-VGA-5X5:
1. Connect VGA enable equipments to the outputs of SW-VGA-5X5.
2. Connect the VGA input sources to the inputs of SW-VGA-5X5.
3. Plug power adapter cable into 5V DC power jack.
4. Use IR Remote, RS-232 serial commands, or front panel push buon to switch among inputs.
Altri manuali per SW-VGA-5X5
3
Indice
Altri manuali Avenview Commutatore a matrice
Avenview
Avenview SW-HDM3D-C6-4X4E Manuale utente
Avenview
Avenview HDM-C6MX/WIP-SET Manuale di installazione e funzionamento
Avenview
Avenview SW-HDM-2X2 Manuale utente
Avenview
Avenview SW-HDM3D-C6-8X8E Manuale utente
Avenview
Avenview SW-HDMI-C5-4X4 Manuale utente
Avenview
Avenview HDM3D-C5SW-R Manuale utente
Avenview
Avenview SW-VGA-5X5 Manuale utente
Avenview
Avenview SW-HBT4K-C6-8X8E Manuale utente
Avenview
Avenview SW-HDM2-T4K-4X4 Manuale utente
Avenview
Avenview HDMI-C5SW-R Manuale utente
Avenview
Avenview DVI-SPLITPRO-4K Manuale utente
Avenview
Avenview SW-HBT-C6IRLT-8X8E Manuale d'uso e manutenzione
Avenview
Avenview SW-DVI-2X4 Manuale utente
Avenview
Avenview HDM-SWITCHPRO-VW4 Manuale utente
Avenview
Avenview SW-DVI-4X2 Manuale utente
Avenview
Avenview SW-VGA-5X5 Manuale utente
Avenview
Avenview SW-DVI-16X16 Manuale utente
Avenview
Avenview SW-HBT-C6POE-16X16E Manuale utente
Avenview
Avenview SW-HDM3D-C6-8X8E Manuale utente
Avenview
Avenview HDM-C6MXIP-SET Manuale utente
