Avenview AVW-DS55V7 Manuale utente
55” LCD Digital Display
PRODUCT MANUAL
Model: AVW-DS55V7
VIDEO WALLS VIDEO PROCESSORS
VIDEO MATRIX SWITCHES
EXTENDERS SPLITTERS WIRELESS
CABLES & ACCESSORIES
Control Your Video
Model: AVW-DS55V7
© 2018 Avenview Inc. All rights reserved.
Copyright
The contents of this document are provided in
connection with Avenview Inc. (“Avenview”) products.
Avenview makes no representations or warranties with
respect to the accuracy or completeness of the contents
of this publication and reserves the right to make
changes to specications and product descriptions at
any time without notice. No license, whether express,
implied, or otherwise, to any intellectual property rights
is granted by this publication. Except as set forth in
Avenview Standard Terms and Conditions of Sale,
Avenview assumes no liability whatsoever, and disclaims
any express or implied warranty, relating to its products
of Avenview Inc. is strictly prohibited.
Rev. Changes Date
0.00 Initial Release 02/01/2018
Revision History
1.7 Revised information 17/07/2018
Rev.00 03/2018
www.avenview.com
TABLE OF CONTENTS
1. GETTING STARTED.................................................................4
1.1 IMPORTANT SAFEGUARDS.................................................4
1.2 SAFETY GUIDELINES....................................................4
1.3 REGULATORY NOTICES FCC...............................................5
2. INTRODUCTION....................................................................6
2.1 PACKAGE CONTENTS.....................................................7
2.2 BEFORE INSTALLATION..................................................7
2.3 PANEL DESCRIPTION - REAR I/O PANEL...................................8
2.4 IR REMOTE CONTROL - BUTTON DESCRIPTION...............................9
3. OSD HOME MENU..................................................................10
3.1 OSD SYSTEM SETTING..................................................11
3.1.1 OSD SYSTEM SETTING - DISPLAY LANGUAGE...............................11
3.1.2 OSD SYSTEM SETTING - SWITCH SCREEN MODE.............................12
3.1.3 OSD SYSTEM SETTING - SWITCH SCREEN DPI..............................12
3.1.4 OSD SYSTEM SETTING - REAL TIME CLOCK................................13
3.1.5 OSD SYSTEM SETTING - PLAY LOG.......................................13
3.1.6 OSD SYSTEM SETTING - USB............................................14
3.1.7 OSD SYSTEM SETTING - SCROLL TEXT....................................14
3.1.8 OSD SYSTEM SETTING - SYNC SETTING...................................15
3.1.9 OSD SYSTEM SETTING - RESTORE TO FACTORY SETTINGS....................15
3.1.10 OSD SYSTEM SETTING - AUTO START.....................................16
3.2.1 OSD SYSTEM CONTROL - WORK MODE......................................16
3.2.2 OSD SYSTEM CONTROL - PLAY MODE......................................17
3.2.3 OSD SYSTEM CONTROL - MANAGE SOFT....................................18
3.2.4 OSD SYSTEM CONTROL - STORAGE........................................19
3.2.5 OSD SYSTEM CONTROL - PLAYTIME.......................................20
3.3.1 OSD NETWORK SETTING - SERVER CONFIGURATION..........................20
3.3.2 OSD NETWORK SETTINGS - IP TYPE......................................23
3.3.3 OSD NETWORK SETTINGS - WIFI SETTING.................................24
3.3.4 OSD NETWORK SETTINGS - 3G SETTING...................................24
3.3.5 OSD NETWORK SETTINGS - LOCAL ID & MAC ADDRESS.......................25
3.4 OSD DATE AND TIME...................................................25
3.5 POWER ON & OFF......................................................27
3.6 STRATEGY TIME.......................................................29
3.6.1 STRATEGY TIME - VOLUME TIME.........................................29
3.6.2 PORT TIME...........................................................30
3.7 FILE MANAGEMENT.....................................................31
Rev.00 03/2018
www.avenview.com
TABLE OF CONTENTS
4. SYSTEM UPGRADE.................................................................31
5. SPECIFICATIONS.................................................................33
6. WARRANTY CARD..................................................................34
Rev.00 03/2018
www.avenview.com
1.2 SAFETY GUIDELINES
The AVW-DS55V7, Digital Signage Touch Kiosk has been tested for conformance to safety regulations and requirements, and
has been certified for international use. However, like all electronic equipments, the AVW-DS55V7 should be used with care.
Read the following safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit.
Do not dismantle the housing or modify the module.
Dismantling the housing or modifying the module may result in electrical shock or burn.
Refer all servicing to qualified service personnel.
Do not attempt to service this product yourself as opening or removing housing may expose you to dangerous voltage
or other hazards.
Keep the device away from liquids.
Spillage onto the housing may result in fire, electrical shock, or equipment damage. If an object or liquid falls or spills on
to the housing, unplug the module immediately.
If the unit appears damaged, have the module checked by a qualified service engineer before using it again.
Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning.
!
!
!
!
!
!
!
!
1.1 IMPORTANT SAFEGUARDS
• Any product on which the serial number has been defaced, modified or removed.
• Damage, deterioration or malfunction resulting from:
• Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or failure to
follow instructions supplied with the product.
• Repair or attempted repair by anyone not authorized by us.
• Any damage of the product due to shipment.
• Removal or installation of the product.
• Causes external to the product, such as electric power fluctuation or failure.
• Use of supplies or parts not meeting our specifications.
• Normal wear and tear.
• Any other causes which does not relate to a product defect.
• Removal, installation, and set-up service charges.
Please read all of these instructions carefully before you use the device. Save this manual for future reference.
Avenview warranty certificate please refer to page #14
Warranty does not include:
SECTION 1 : GETTING STARTED
Rev.00 03/2018
www.avenview.com
Page 4 of 35
1.3 REGULATORY NOTICES FEDERAL COMMUNICATIONS COMMISSION (FCC)
Warning Symbols Description
ONLY USE THE PROVIDED POWER CABlE OR POWER
ADAPTER SUPPLIED. DO NOT TAMPER WITH THE ELECTRICAL
PARTS. THIS MAY RESULT IN ELECTRICAL SHOCK OR BURN.
THIS WARNING SYMBOL MEANS DANGER. WHEN THIS SYMBOL IS
PLACED, YOU ARE IN AN ENVIROMENT THAT CAN CAUSE
BODILY INJURY.
DO NOT TAMPER WITH THE UNIT. DOING SO WILL VOID THE
WARRANTY AND CONTINUED USE OF THE PRODUCT.
THE CIRCUIT BOARDS ARE VERY SENSITIVE TO STATIC
DISCHARGE. PLEASE ENSURE IF RACK MOUNTED OR INSTALLED
ON A SURFACE, IT SHOULD BE IN A GROUNDED ENVIROMENT.
Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
Properly shielded and grounded cables and connectors must be used in order to meet FCC emission limits. Avenview is
not responsible for any radio or television interference caused by using other than recommended cables and connectors or
by unauthorized changes or modifications to this equipment.
Rev.00 03/2018
www.avenview.com
Page 5 of 35
Features
Hardware
-Built-in 8GB memory, support TF memory card and USB expansion,
-Supports 4 differnet modes: Stand-alone, LAN, WIFI and 3G (Optional);
-Supports portrait and landscape mode on screen
-An external media player can be attached via the VGA or HDMI ports.
-Set the timer On/Off function daily and weekly.
-High security: encryption function can be used to protect the content.
-Program can be updated via network or USB device on site.
-Media files can be played from USB stick directly.
Note: In stand-alone mode the user can import the media files from USB stick to internal flash memory
Software
-Supports multi-zone screen function, different templates and transitions.
-Capable of running multiple playlists.
-Create schedules.
-Support scrolling text, real-time clock, logo, etc.
-Video Support: MPEG1, MPEG2, MPEG4, H.264, WMV
-Audio Support: MP3
-Static Image Support: JPEG, BMP, PNG
2. INTRODUCTION
The Avenview AVW-DS55V7 Digital Signage 55”Touch Kiosk allows the user to easily display or upload
digital content with an all in one portable solution (LCD display Touch screen and digital signage player bundled
together).This unit supports 1080p@60Hz high definition video, multi-channel digital audio, along with support
from external sources using HDMI or VGA for quick display of any media content.
With its versitile operating system it can support most CMS software and applications (widgets) that can be
stored on its 8GB memory, TF memory card or USB expansion support. Inegrated with ethernet support via
LAN and WIFI, users can create a full experience by uploading media or creative content over the network
from a PC, or direct with USB.
Rev.00 03/2018
www.avenview.com
Page 6 of 35
2.2 BEFORE INSTALLATION
ATTENTION
• To prevent airflow restriction, allow clearance around the ventilation openings to be at least: 24 Inches (610mm).
• Unauthorized changes or modifications could void the user's authority to operate the equipment.
• Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard
practices for preventing accidents.
• Place the product on an even and stable surface. If the product falls, it may cause an injury to a person or malfunction.
• Do not place the product in high temperatures (over 50°C), or low temperature (under 0°C) or high humidity.
• Use the power supply with correct specifications. If inappropriate power supply is used then it may cause a fire.
• Do not twist or pull by force the ends of the UTP /HDMI cable. It can cause malfunction.
• Keep the device away from water. If the unit becomes wet, power off immediately.
• Installation of the equipment must comply with local and national electrical codes.
• Take care when connecting units to the electrical power circuit in case the maximum rated circuit is not overloaded
QTY
x1
x1
x1
x1
ITEM
55” Digital Signage Touch Kiosk
Power cord C13
Either Standard US power cord*
or International power cord
(UK,EU,AUS)
*Based on order request
IR Remote Control
Product User Manual
#
1
2
3
4
Before you start the installation of the AVW-DS55V7, please ensure that the packaging has the listed items below.
2.1 PACKAGE CONTENTS
Rev.00 03/2018
www.avenview.com
Page 7 of 35
1
2
4
5
5431
2 6 7
8 9
2.3 PANEL DESCRIPTION - REAR I/O PANEL
Ethernet Port: Connect Patch cable CAT5/6 to network switch or PC lan port
HDMI Port: Connect Type A Male HDMI Cable for external source input
VGA Port: Connect DE-15 PIN Male VGA Cable for external source input
Audio Port: Connect 3.5mm(TRS) Male audio Cable for external VGA source input
6USB1 Port: Connect Type A USB2.0 Cable for external media files or updating
7USB2 Port: Connect Type A USB2.0 Cable for external mouse / keyboard /files
8TF Port: Connect TF memory card for memory expansion if the internal memory is full
9SIM Port: Connect SIM card to connect to 3G network for internet transfer of media files via
mobile network connection (Only available for 3G mode and pre-ordered models)
3RESET: Reset MAIN control board to factory default
Rev.00 03/2018
www.avenview.com
Page 8 of 35
2.4 IR REMOTE CONTROL - BUTTON DESCRIPTION
POWER: Toggle button: Power On/Off the Digital Signage kiosk
MENU: Press: To access the Main control board menu (Source, System Settings etc...)
SETUP: Press: To access the Digital signage menu (Network settings, Time, etc...)
SOURCE: Press: To select which source media to be shown (HDMI, VGA, Internal)
Press: To START/PLAY your playlist stored on internal memory or Enter in menu
Press:
Press: To navigate UP in menu or UP functions in OSD.
Press: To navigate DOWN in menu or DOWN functions in OSD.
Press: To navigate RIGHT in menu or RIGHT functions in OSD or Next Media.
Press: To STOP current playlist / media content and return to home page.
Press: To navigate LEFT in menu or LEFT functions in OSD or Next Media.
Press: To MUTE the volume of the media content playing.
Press: To increase the VOLUME UP level of the media content playing.
Press: To decrease the VOLUME DOWN level of the media content playing.
HDMI Press: To select the external HDMI source plugged in to the unit.
VGA Press: To select the external VGA source plugged in to the unit.
Press: To RETURN previous tab in menu or BACK functions in the OSD menu.
YPbPr Press: To choose the default Internal digital signage player as a source.
NOTE: To return to the USER setup menu when a playlist is currently active the user must press STOP on the
IR Remote control. This will immedialtely stop the content played and display the Digital signage home page.
To begin the loaded media, please press PLAY.
Rev.00 03/2018
www.avenview.com
Page 9 of 35
Questo manuale è adatto per i seguenti modelli
1
Indice
