Aveo Systems Mira Connect Manuale utente
© 2017 Aveo Systems, Inc. 1
Mira Connect™Quick Install Guide
www.aveosystems.com
July 2017
Version 1.01
Document 210.1196.001
Simplifying Collaboraon
© 2017 Aveo Systems, Inc.2
What’s Included
Mira Connect device
7 (2.1m) Cat-5e cable
Screen cleaning cloth
Oponal
PoE injector, power cord, and
dual lock strip for mounng.
Preparing for Installaon
Before starng the installaon, ensure you have the following:
1. The name you’d like to use for the organizaon, site, and room.
2. A network connecon for Mira Connect that has a route to the equipment
and to Mira Portal.
3. The model numbers of the equipment to be controlled.
4. The IP addresses of the equipment and any login credenals required to
control the equipment over the network.
5. Telnet is enabled for network control of the equipment, such as video
conferencing equipment, if it is not enabled by default.
© 2017 Aveo Systems, Inc. 3
Installaon Steps
Use Mira Portal to dene a Room:
1. Create an account or log in to Mira Portal with your computer:
hps://mira.aveosystems.com.
2. Add a new Organizaon or select one. The organizaon is usually the
name of the company where Mira Connect is installed.
3. Add a new Site to the organizaon or select one. The site is usually a
building or campus locaon within the organizaon.
4. Add a new Room to the site or select a room.
Pair Mira Connect to the Room:
5. Connect Mira Connect to a Power-over-Ethernet (PoE) network that has a
route to the equipment and to hps://mira.aveosystems.com or connect a
PoE injector for power when using a wireless network.
6. Press and hold the power switch on the Mira Connect for three seconds
and then release to power on Mira Connect.
Power Switch
Ethernet InterfaceKensington-style lock slot
7. Select the Applicaon Language.
8. Select the Network: Wired or Wireless. For Wireless Networks, select the
network and enter the password or key, if necessary.
9. If Mira Connect has a valid network route, it will show a pairing code to be
used in Mira Portal to pair to the room.
10. Using Mira Portal, click PAIR in the
Mira Connect panel for the selected
room, then enter the pairing code in
the pop-up window.
11. On Mira Connect, conrm the desired room has been selected in the
Setup Summary and then click Finish.
PAIR
© 2017 Aveo Systems, Inc.4
Add Equipment to the Room:
12. In Mira Portal, select the Equipment menu item. In
the Equipment panel click the ADD buon to add
equipment to the room. In the pop-up window enter
the IP address and oponal login credenals for the
equipment, and click Update Equipment.
13. For equipment that requires addional setup, edit the equipment,
customize the equipment opons or enter control points, and click
Update Equipment. See the Administrator’s Guide for more informaon
about specifying control points.
14. Conrm all equipment shows the green “Connected” status. Edit
equipment with red warning symbols to correct the IP address or control
points.
Polycom GroupSeries
172.24.19.45
Polycom GroupSeries
172.24.19.45
User Interface
Once Mira Connect is successfully paired with the room, the user interface
will appear on Mira Connect automacally. The user opons available depend
on the equipment used in the room and the control points used with the
equipment. Customize the visual theme for the Site to add a company’s logo,
background image, or custom colors to all rooms within the site.
For more informaon, see the Administrator’s Guide and Mira Connect Users
Guide: hps://aveosystems.com/mira-connect-family.
Aveo Systems, Inc., 1791 West Oak Parkway, Suite 8, Mariea, GA 30062
Phone: +1.678.653.7090, Fax: +1.844.329.2836
www.aveosystems.com
Aveo Systems, the Aveo Systems logo, Mira Connect, and Mira Portal are trademarks of Aveo Systems, Inc.
Altri manuali per Mira Connect
1
Indice
Altri manuali Aveo Systems Pannello touch
