Avermedia AVerDiGi Manuale utente
AVerMedia®
AVerDiGi
System Controller Pro
User Manual
Oct. 2009
DISCLAIMER
No warranty or representation, either expressed or implied, is made with respect to the
contents of this documentation, its quality, performance, merchantability, or fitness for a
particular purpose. Information presented in this documentation has been carefully
checked for reliability; however, no responsibility is assumed for inaccuracies. The
information contained in this documentation is subject to change without notice.
In no event will AVerMedia be liable for direct, indirect, special, incidental, or
consequential damages arising out of the use or inability to use this product or
documentation, even if advised of the possibility of such damages.
TRADEMARKS
AVerMedia, being authorized AVerMedia INFORMATION, Inc. to use, is registered
trademarks of AVerMedia TECHNOLOGIES, Inc. IBM PC is a registered trademark of
International Business Machines Corporation. Macintosh is a registered trademark of
Apple Computer, Inc. Microsoft is a registered trademark and Windows is a trademark of
Microsoft Corporation. All other products or corporate names mentioned in this
documentation are for identification and explanation purposes only, and may be
trademarks or registered trademarks of their respective owners.
COPYRIGHT
2009 by AVerMedia®INFORMATION, Inc. All rights reserved. No part of this publication
may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated
into any language in any form by any means without the written permission of AVerMedia®
TECHNOLOGIES, Inc.
TABLE OF CONTENTS
CHAPTER 1 INTRODUCTION............................................................................1
1.1 Hardware Introduction............................................................................................................... 1
1.1.1 Left Side.......................................................................................................................... 1
1.1.2 Rear Side ........................................................................................................................ 1
1.1.3 Familiarizing with System Controller Panel Buttons........................................................ 2
1.2 Hardware Installation................................................................................................................. 5
1.2.1 Connecting with the DVR Server ................................................................................... 5
1.2.2 Connect a PTZ Camera to System Controller Pro......................................................... 5
CHAPTER 2 OPERATING THE SYSTEM CONTROLLER PRO........................6
2.1 Using the System Controller for the First Time.......................................................................... 6
2.1.1 Switching to USB DVR Mode......................................................................................... 7
2.2 Familiarizing with LCD Screen................................................................................................. 8
2.3 Operating the LCD Menu......................................................................................................... 9
2.4 Select a Camera .....................................................................................................................11
2.5 Locking System Operation..................................................................................................... 12
2.6 Trigger the Alarm Button ........................................................................................................ 13
2.7 To Playback the Recorded File .............................................................................................. 14
2.7 To Playback the Recorded File .............................................................................................. 14
2.8 To View the Emap .................................................................................................................. 16
2.9 PTZ Operation......................................................................................................................... 17
2.9.1 Using the Joystick to Operate the PTZ Camera............................................................ 17
2.9.2 To Focus the Object ...................................................................................................... 18
2.9.4 Setup preset position and Use Preset........................................................................... 19
Setup Preset Position.................................................................................................... 19
Using the Preset Button ................................................................................................ 19
2.9.5 Enabling the AutoPan.................................................................................................... 20
2.9.6 Using Digital Zoom........................................................................................................ 22
2.10 Multi-Functions Menu........................................................................................................... 23
2.10.1 Select a Monitor Layout................................................................................................. 23
2.10.2 Camera Setup............................................................................................................... 24
Enable a Camera ......................................................................................................... 24
Enable a Camera View.................................................................................................. 25
Adjusting the Hue.......................................................................................................... 26
Adjusting the Saturation................................................................................................ 27
Adjusting the Brightness................................................................................................ 28
Adjusting the Contrast................................................................................................... 29
Enable the De-interlace................................................................................................. 30
Trigger the Relay of IP Camera..................................................................................... 31
2.10.3 Server Setup ................................................................................................................. 32
Start Recording.............................................................................................................. 32
Stop Recording.............................................................................................................. 33
Network Time Synchronization...................................................................................... 34
Open Event Log Viewer ................................................................................................ 34
2.10.4 Sound Setup.................................................................................................................. 35
2.10.5 Controller Setup ............................................................................................................ 36
Set a Password for System Controller .......................................................................... 36
Change the Password of the System Controller ........................................................... 38
Set the Timer................................................................................................................. 40
Adjusting the Brightness of LCD Screen....................................................................... 41
Adjusting the Contrast of LCD Screen .......................................................................... 42
Enable/disable Code Number Display .......................................................................... 43
Enable/disable Button Confirmation.............................................................................. 44
Viewing System Version Information............................................................................. 45
CHAPTER 3 OPERATING IN PTZ 485 MODE .................................................46
3.1 Switching to the PTZ 485 Mode............................................................................................. 46
3.2 Select the Protocol of the PTZ Camera ................................................................................. 48
3.3 Setup the Baudrate of the PTZ Camera ................................................................................ 49
3.4 Controller Setup..................................................................................................................... 50
Set a Password for System Controller .......................................................................... 50
Change the Password of the System Controller ........................................................... 52
Set the Timer................................................................................................................. 54
Adjusting the Brightness of LCD Screen....................................................................... 55
Adjusting the Contrast of LCD Screen .......................................................................... 56
Viewing System Version Information............................................................................. 57
1
Chapter 1 Introduction
The AVerDiGi System Controller Pro provides user an easy way to operate DVR server (NV/SA series).
1.1 Hardware Introduction
1.1.1 Left Side
Function Description
(1) USB Port 2 * USB ports for connection of keyboard, mouse, or USB flash memory.
(2) Audio Input For audio input device connection such as microphone.
(3) Audio Output For audio output device connection such as speaker.
i
- The audio input and output device has its own power supply is necessary.
- The audio input and output port act as the audio input and output port on the DVR
system.
1.1.2 Rear Side
Function Description
(1) RS485 Port For connection of Pelco-D/P PTZ camera
(2) Power Supply
Port For AC power adaptor connection.
2
1.1.3 Familiarizing with System Controller Panel Buttons
System Controller Panel figure
Function Description
(1) (Lock) To lock panel buttons and all operations are lock. Press it to lock and press
again to un-lock. If the system password has been set, please enter the
password to un-lock (see also Chapter 2.5)
(2) (Power) Lights up when unit is power on.
(3)
(Panic Button)
To trigger the alarm buttons that user has defined (see also Chapter 2.6).
To setup alarm button, please refer to Chapter 5.9 step 5 of NV User’s
Manual. If the alarm button hasn’t been defined, there is no any action
when alarm button is selected to trigger.
(4) Playback Control
Buttons (Jog/Shuttl
e)
Enable/disable the jog/shuttle function. When button
lights up is enabling.
(Pause) To pause the playback.
(Play) To switch to playback mode and start playback.
(Jog/Shuttle)
- Jog dial (top part): Playback video at faster forward
or rewind speed that control by user.
- Shuttle ring (lower part): Playback video frame-by-
frame that control by user.
(5)
(Alarm Log)
To call out the alarm log window. To close alarm log window, press the
button again.
(6) LCD Screen To operate the each function in multi-functions menu and view system
related information.
(7) Multi-function
Buttons Each button represents a function that is corresponding to the function
display on the LCD screen. Press the button and operate it (see also
Chapter 2.10).
3
Function Description
(8) Enable/disable the PTZ camera move automatically that is based on the
selected camera group preset position number(see also Chapter 2.9.5).
(9) Custom
Function Buttons To view system information.
Enable/disable recording. Press it to start recording and press
again to stop recording. The authentication password is
required for stop recording. Using numeric key pad to enter the
password and press Enter button to confirm.
Enable/disable network connection. Press it to connect the
network and press again to disconnect the network. The
authentication password is required for stop network
connection. Using numeric key pad to enter the password and
press Enter button to confirm.
To enter system setup mode. The authentication password is
required to enter system setup mode. Using numeric key pad
to enter the password and press Enter button to confirm.
To freeze/un-freeze the surveillance screen. Press it to freeze
the screen and press again to un-freeze.
To extend/fold camera tree window.
Open/close PTZ control panel. Press it to call out the PTZ
control panel and press again to close it.
Call out Logout dialog.
(10) Preset/Set
Button Move the PTZ camera to the selected preset position (see also
Chapter 2.9.4).
To setup the PTZ preset position (see also Chapter 2.9.4))
(11) Enable/disable joystick as a mouse function.
(12) When lights up in green, user can use PTZ related operation(see also
Chapter 2.9).
(13) Joystick To control PTZ camera to left, right, up, down, zoom in, and zoom out.
(14) IRIS/Focus
Button
(IRIS)
To adjust the brightness of the image.
(Focus)
To adjust the focus of the PTZ camera.
4
Function Description
(15) Enable/disable digital zoom (see also Chapter 2.9.6).
(16) Numeric Key
Pad ~
For numbers entering
Enter button For confirmation
To exit from current status.
&
Moving the cursor to left or right.
(17) Back /Top Menu
Button Go back to previous multi-function menu screen.
Go back to the main menu screen.
(18)
(Camera Select)
Using to select the camera channel (see also Chapter 2.4)
(19) Microphone Build-in microphone
(20) Switch to full screen mode.
(21) Enable/disable channel display cycle automatically. Press it to start auto
pan and press again to stop.
(22) When button is pressed and lights up, the System controller can receive
the sound.
(23) Switch to Emap mode. In Emap mode, user can select different emap to
view(see also Chapter 2.8)
(24) Take a quick photo shot of the surveillance screen and save it.
(25) Switch to preview/live view mode.
5
1.2 Hardware Installation
1.2.1 Connecting with the DVR Server
The following is an example of System controller installation.
1. The DVR server should be power on and DVR program is executed.
2. Plug the power cord of the System Controller into power outlet.
3. And then, plug the USB cable that is attached on the System Controller to the USB port of the
DVR server.
1.2.2 Connect a PTZ Camera to System Controller Pro
The following is an example of PTZ camera install to System Controller Pro.
1. Connect the PTZ camera to System Controller Pro through the RS-485 interface.
2. Plug the power cord of the System Controller Pro into power outlet.
6
Chapter 2 Operating the System Controller Pro
2.1 Using the System Controller for the First Time
For the first time using the System Controller, please select the model of System Controller in DVR
server.
Follow the below steps to select the model:
1. Start up the DVR program.
2. Click Setup.
3. Select System, the System Setting windows will appear.
4. Click
Setup.
5. Select the Model as System Controller Pro. When DVR server has detected the System
Controller device, user should see the model name System Controller Pro in drop-down list.
6. Click OK to complete the setting.
7. If the setting is complete, the LCD of System Controller should display like following figure.
Altri manuali per AVerDiGi
1
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Avermedia Controllori
