Avid Power ACAP110D Manuale utente
20V AUTOMATIC CORDLESS INFLATOR
MODEL: ACAP110D
(Mon. to Sun. Any time)
1
TABLE OF CONTENTS
IMPORTANT SAFETY INSTRUCTIONS----------------------------------P.2
SAFETY PRECAUTIONS FOR INFLATOR------------------------------P.4
SPECIFICATIONS---------------------------------------------------------------P.6
FUNCTIONAL--------------------------------------------------------------------P.7
OPERATION----------------------------------------------------------------------P.7
MAINTENANCE------------------------------------------------------------------P.14
PARTS LIST AND SCHEMATIC DRAWING-----------------------------P.15
2
IMPORTANT SAFETY INSTRUCTIONS
READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow
all instructions listed below, may result in electric shock, fire and/or
serious personal injury.
1. Keep your work area clean and well lit. Cluttered benches and dark
areas invite accidents. Keep bystanders, children, and visitors away
while operating an inflator. Distractions can cause you to lose control.
2. Operate inflator in an open area at least 18 in. away from any wall or
object that could restrict the flow of fresh air to ventilation openings.
ELECTRICAL SAFETY
1. To reduce the risk of electrical shock, do not put inflator in water or
other liquid. Do not place or store appliance where it can fall or be
pulled into a tub or sink.
2. Use this product only with batteries and chargers.
PERSONAL SAFETY
1. Stay alert, watch what you are doing and use common sense when
operating an inflator. Do not use inflator while tired or under the
influence of drugs, alcohol, or medication. A moment of inattention
while operating inflator may result in serious personal injury.
2. Dress properly. Do not wear loose clothing or jewelry. Contain long
hair. Keep your hair, clothing, and gloves away from moving parts.
Loose clothes, jewelry, or long hair can be caught in moving parts.
3. Do not overreach. Keep proper footing and balance at all times.
Proper footing and balance enable better control of the inflator in
unexpected situations.
4. Use safety equipment. Always wear eye protection. Dust mask,
non-skid safety shoes, hard hat, or hearing protection must be used
for appropriate conditions.
5. Eye protection is required to guard against flying fasteners and debris
which could cause severe eye injury.
When using electric appliances, basic precautions should always
be followed, including the following.
WORK ARER
3
IMPORTANT SAFETY INSTRUCTIONS
6. Do not wear loose clothing or jewelry. Contain long hair. Loose
clothes, jewelry, or long hair can be drawn into air vents.
7. Do not use on a ladder or unstable support. Stable footing on a solid
surface enables better control of the inflator in unexpected situations.
8. Do not disassemble the inflator.
9. Do not operate inflator near flammable liquids or in gaseous or
explosive atmospheres. Internal sparks may ignite fumes.
10. Do not store your inflator in a damp or wet location. Do not store in
locations where the temperature is less than 50°F or more than
100°F.
INFLATOR USE AND CARE
1. Check hoses for weak or worn condition before each use, making
certain all connections are secure. Do not use if defect is found.
2. Release all pressures within the system slowly. Dust and debris
may be harmful.
3. Do not use inflator if switch does not turn it on or off. An inflator that
cannot be controlled with the switch is dangerous and must be
repaired.
4. Trun off the machine
before making any adjustments, changing
accessories, or storing the inflator. Such preventive safety
measures reduce the risk of starting the inflator accidentally.
5. Store idle inflators out of reach of children and other untrained
persons. Inflators are dangerous in the hands of untrained users.
6. Check for misalignment or binding of moving parts, breakage of
parts, and any other condition that may affect the inflator’s operation.
If damaged, have the inflator serviced before using. Many accidents
are caused by poorly maintained tools.
7. Use only accessories that are recommended by the manufacturer for
your model. Accessories that may be suitable for one inflator may
create a risk of injury when used on another inflator.
4
IMPORTANT SAFETY INSTRUCTIONS
8. Keep the inflator and its handle dry, clean and free from oil and
grease. Always use a clean cloth when cleaning. Never use brake
fluids, gasoline, petroleum- based products, or any strong solvents
to clean your inflator. Following this rule will reduce the risk of loss
of control and deterioration of the enclosure plastic.
9. Never point any inflator toward yourself or others.
10. Keep the exterior of the inflator dry, clean, and free from oil and
grease. Always use a clean cloth when cleaning. Never use brake
fluids, gasoline, petroleum- based products, or any strong solvents
to clean the unit. Following this rule will reduce the risk of deterioration
of the enclosure plastic.
11. Do not exceed the pressure rating of any component in the system.
12. Protect material lines and air lines from damage or puncture. Keep
hose and power cord away from sharp objects, chemical spills, oil,
solvents, and wet floors.
SERVICE
1. Inflator service must be performed only by qualified repair personnel.
Service or maintenance performed by unqualified personnel may
result in a risk of injury.
2. When servicing an inflator, use only identical replacement parts.
Follow instructions in the Maintenance section of this manual. Use of
unauthorized parts or failure to follow Maintenance instructions may
create a risk of shock or injury.
1. Know your inflator. Read operator’s manual carefully. Learn its
applications and limitations, as well as the specific potential hazards
related to this tool. Following this rule will reduce the risk of electric
shock, fire, or serious injury.
2. Risk of bursting. Do not operate inflator to result in output pressure
greater than marked maximum pressure of item to be inflated. Do not
use at pressure greater than 6.8 Bar.
3. To reduce the risk of electric shock, do not expose to rain. Store
indoors.
SAFETY PRECAUTIONS FOR INFLATOR
5
SAFETY PRECAUTIONS FOR INFLATOR
4. Inspect unit for cracks, pin holes, or other imperfections that could
cause inflator to become unsafe. Never cut or drill holes in the inflator.
5. Make sure the hose is free of obstructions or snags. Entangled or
snarled hoses can cause loss of balance or footing and may become
damaged.
6. Use the inflator only for its intended use. Do not alter or modify the
unit from the original design or function.
7. Always be aware that misuse and improper handling of this inflator
can cause injury to yourself and others.
8. Never leave an inflator unattended with the air hose attached to the
item being inflated.
9. Do not continue to use an inflator or hose that leaks air or does not
function properly.
10. Always disconnect the air supply and power supply before making
adjustments, servicing an inflator, or when an inflator is not in use.
11. Do not attempt to pull or carry the inflator by the hoses.
12. Always follow all safety rules recommended by the manufacturer of
your inflator, in addition to all safety rules for the inflator. Following
those rules will reduce the risk of serious personal injury..
13. Household use only.
14. Do not use inflator as a breathing device.
15. Never direct a jet of compressed air toward people or animals. Take
care not to blow dust and dirt towards yourself or others. Following
this rule will reduce the risk of serious injury.
16. Protect your lungs. Wear a face or dust mask if the operation is dusty.
Following this rule will reduce the risk of serious personal injury.
17. Do not use this inflator to spray chemicals. Your lungs can be
damaged by inhaling toxic fumes.
18. Check damaged parts. Before further use of the inflator or air tool, a
guard or other part that is damaged should be carefully checked to
determine that it will operate properly and perform its intended
function. Check for alignment of moving parts, binding of moving
parts, breakage of parts, mounting, and any other conditions that
may affect its operation. A guard or other part that is damaged
6
SAFETY PRECAUTIONS FOR INFLATOR
SPECIFICATIONS
should be properly repaired or replaced by an authorized service
center. Following this rule will reduce the risk of shock, fire, or serious
injury.
19. Inspect tool cords periodically and, if damaged, have repaired at your
nearest Authorized Service Center. Constantly stay aware of cord
location. Following this rule will reduce the risk of electric shock or fire.
20. Risk of bursting. Carefully monitor objects during inflation.
21. To reduce the risk of over inflation, use a reliable pressure gauge
periodically during inflation.
22. Never leave the inflator unattended during inflation.
23. Allow pump to cool for five (5) minutes after each five (5) minutes of
continuous use. Never block the inflating or deflating outlets while
operating.
24. Save these instructions. Refer to them frequently and use them to
instruct others who may use this inflator. If you loan someone this
inflator, loan them these instructions also.
Great for Car/RV/SUV Tires and small inflatables
Digital pressure gauge automatically shuts off at desired pressure
Cordless design for convenience
Comes with nozzle accessories
Operate from 20V Battery (included) or 12V Power Adapter
Built in battery indicator
1-Ball Nozzle, 1-Tire Valve Nozzle, 1-Air Bed Nozzle
1- 12V Car Plug-in Power Base
1-20V Li-ion Battery
1-Charger
1-Tool Bag
INCLUDE
INCLUDES
FUNCTION
OPERATION
A. Rubber-covered handle
B. Air hose
C. Air chuck
D. Digital pressure gauge
E. Hose storage area
F. Start switch
G. Charger
H. LED-light
I. 12V Power adapter
J. USB Output Port
1. The battery is not fully charged. You’d better let it charge for 3-5
hours before the first use. Normal charging time is 3-5 hours
when the battery is completely dead.
2. Replace a new battery when tool performance begins to diminish;
Severe heat is most destructive to a battery; The more heat it
generates, the faster the battery loses power. A battery that gets
too hot can have a shortened life.
3. Never over-discharge a battery when using the tool even after tool
performance has decreased. When tool performance begins to
diminish, please stop letting the tool work and recharge the battery
for optimal performance.
Battery Pack
A
B
C
D
E
F
G
H
I
J
OPERATING
How to charge the battery pack ?
Green light: power indicator. When the charger is connected to AC
household current, the green light is on.
Red light: charging indicator. When the battery is properly inserted
into the charger and charging, the red light is on.
How do you know if the battery is fully charged ?
Normal charging time is 3 to 5 hours when the battery is completely
dead. The red light will turn off and the green light remains lit once the
battery is fully charged.
After the charging is completed, remove the battery pack from the
charging stand immediately. When charging more than one battery pack,
allow 15 minutes between charges.
After many charge/discharge cycles, your battery may lose its ability
to hold a charge. If so, please replace it. Dispose of batteries at
an appropriate waste disposal facility. Do not throw batteries away
in common trash receptacles.
Red Light
Green Light
Fig.2
9
USB OUTPUT FOR OTHER DEVICES CHARGING
Fig.4
Fig.3 A
B
1. Plug the USB cable into the USB Output Port (A) on the battery
pack (Fig.3)
2. Press the button (B) for charging (Fig.4)
OPERATING
Step 1: Install Battery Pack or 12 Car Power Adapter
HOW TO USE
3. Press the button (B) to display the battery level.(Fig.4). Three lights
on the battery indicates a full charge. Two lights show 50% of the power
while one light shows 25%.
Install or remove battery pack(Fig.5)
To install : slide battery pack into the bottom
of the tool until you hear a click. Make sure
that the latch in place and battery is secure
before operation.
To remove: Press the battery release latch
and pull the battery pack out at the same time.
Fig 5
NOTE: please remove the charger from the battery before checking
the battery level.
Latch
Indice
Altri manuali Avid Power Utensili elettrici
