Avigilon 3 Series Manuale utente

User Guide

Avigilon Network Video Recorder Series 3

HD-NVR3-STD-24TB and HD-NVR3-STD-36TB

CONTROL CENTER and AVIGILON APPEARANCESEARCH are trademarks of Avigilon Corporation. Other

names or logos mentioned herein may be the trademarks of their respective owners. The absence of the

symbols ™ and ® in proximity to each trademark in this document or at all is not a disclaimer of ownership of

the related trademark. Avigilon Corporation protects its innovations with patents issued in the United States

of America and other jurisdictions worldwide (see avigilon.com/patents). Unless stated explicitly and in

writing, no license is granted with respect to any copyright, industrial design, trademark, patent or other

intellectual property rights of Avigilon Corporation or its licensors.

This document has been compiled and published using product descriptions and specifications available at

the time of publication. The contents of this document and the specifications of the products discussed

herein are subject to change without notice. Avigilon Corporation reserves the right to make any such

changes without notice. Neither Avigilon Corporation nor any of its affiliated companies: (1) guarantees the

completeness or accuracy of the information contained in this document; or (2) is responsible for your use

of, or reliance on, the information. Avigilon Corporation shall not be responsible for any losses or damages

(including consequential damages) caused by reliance on the information presented herein.

Avigilon Corporation

avigilon.com

PDF-NVR3STD-B

Revision: 3 - EN

20200406

Table of Contents

Introduction 1

Before YouStart 1

Overview 1

Front View 1

Back View 2

Installation 4

Package Contents 4

Installing the Rack Rails and Cable Management Arm 4

Connecting Cables 4

Installing the Bezel 4

Configuring Windows 10 5

Activating and Configuring ACC Software 6

Troubleshooting 6

Network Configuration 6

Checking System Health 6

Advanced Features 7

Checking System Health 7

Replacing a Hard Drive Blank 8

Replacing Front or Back Hard Drives 10

LED Indicators 11

Diagnostic Indicators 11

Power Status Indicators 11

Network Link Status Indicators 12

Hard Drive RAID Status Indicators 13

Specifications 14

iii

Introduction

The Avigilon Network Video Recorder is preloaded with the Avigilon Control Center software and is

configured for maximum performance and reliability. The Network Video Recorder can be easily integrated

into any existing Avigilon security system, or act as the base of a new site.

Before YouStart

Avigilon recommends the use of an uninterruptible power supply (UPS) system to protect your video

surveillance system hardware. A UPS system is used to protect critical equipment from mains supply

problems, including spikes, voltage dips, fluctuations and complete power failures using a dedicated

battery. It can also be used to power equipment during the time it takes for a standby generator to be

started and synchronized.

Any UPS connection must include configuration to shut down the operating system on the appliance when

battery power is low or there is 15 minutes of power remaining.

It is recommended that cameras not be connected to the appliance until after the appropriate network

configuration has been set up.

Overview

Front View

Introduction 1

1. Bezel

Protects against unauthorized physical access to the hard drives. The bezel must be removed to

access the front of the recorder.

2. Power button

Controls the power supply to the recorder.

3. Hard drives

Provides access to hot-swappable hard drives. There are LED indicators on each hard drive.

Some drives may contain an empty hard drive tray.

4. Video connector

Accepts a VGA monitor connection.

5. Diagnostic indicators

Provides information about system operations.

For more information, see LED Indicators on page11.

6. Information tag

Provides the product service details, MAC addresses and a copy of the Windows license key.

Back View

1. Serial connector

Accepts connections to serial devices.

2. Video connector

Accepts a VGA monitor connection.

3. USB connectors

Accepts USB connections to external devices.

4. 1 Gigabit Ethernet ports

Accepts an Ethernet connection to multiple networks.

Back View 2

5. Power supply

Redundant power supply. Optional secondary power supply is available (HD-NVR3-STD-2NDPS).

6. SD card slot

Accepts an SD card.

7. Operating system hard drives

Two hot-swappable 2.5 inch hard drives that are loaded with the operating system.

Back View 3

Installation

Package Contents

Ensure the package contains the following:

lAvigilon Network Video Recorder

lRack sliding rail assembly kit

lCable management arm assembly kit

lBezel and key

lPower cable

Installing the Rack Rails and Cable Management Arm

If the recorder will be kept in a server rack, install the Rack Sliding Rails and the Cable Management Arm

provided in the recorder package. Follow the procedures outlined in the Rack Installation Instructions and

the CMA Installation Instructions provided in the assembly kits.

Note: The supplied Rack Sliding Rails are compatible with square and round hole racks.

Connecting Cables

Refer to the diagrams in the Overview section for the location of the different connectors. Make the

following connections as required:

1. Connect a KVM switch or separate keyboard, mouse and monitor to the recorder.

lThe keyboard and mouse can be connected to any USB port on the recorder.

lThe monitor can be connected to any video connector at the front or back of the recorder.

2. Connect the recorder to your network using an Ethernet cable.

3. Connect a power cable to the power supply at the back of the recorder.

4. Press the power button on the front of the recorder. Check that the recorder LED indicators display

the correct status.

Installing the Bezel

The bezel can be installed on the front of the recorder to help protect the power button and hard drives

against unauthorized access.

Installation 4

1. Slide the right end of the bezel against the right hinge of the recorder.

2. Push the left end of the bezel against the recorder until it clicks into place.

3. Use the provided key to lock the bezel.

Configuring Windows 10

After the recorder starts, you will need to configure the Windows operating system for the first time.

1. On the first screen, the MICROSOFT SOFTWARE LICENSE TERMS and AVIGILON CONTROL

CENTER™ SOFTWARE END USER LICENSE AGREEMENT are displayed. Review the terms and click

Accept.

2. Select Join a local Active Directory domain.

Note: This prompt appears only if an Active Directory is present on the network. See the

Windows Help and Support files for more information.

3. Enter a user name for accessing the Windows software.

4. Enter a password and password hint for the user name and click Next.

5. After a minute, choose the ACC version in use at your site.

You are logged in to the Windows environment. The Avigilon Control Center Admin Tool

automatically starts up.

Configuring Windows 10 5

Note: If you are performing operating system recovery, the Avigilon Control Center Admin

Tool does not automatically start up. For more information about running the local ACC

installer, see Troubleshooting below.

Proceed to activate the license for the Avigilon Control Center software on your Video Appliance.

Proceed to activate the license for the AvigilonControl Center software on your Network Video Recorder.

Activating and Configuring ACC Software

lInitial ACC™ System Setup and Workflow Guide

lACC 7 Help Center

For information about cloud-connecting your ACC server, see Avigilon Cloud Services Support.

Printable versions of these guides are available on the Avigilon website:

https://www.avigilon.com/support/software/.

Troubleshooting

Network Configuration

By default, the Network Video Recorder acquires an IP address on the network through DHCP. If you need

to set up the recorder to use a static IP address or any specific network configuration, see the Windows

Help and Support files for more information.

Checking System Health

You can check on the health of the system components in the Site Health in the ACC Client software. See

the Windows Help and Support files for more information.

Activating and Configuring ACC Software 6

Advanced Features

Checking System Health

The Server Administrator software is pre-installed on the recorder. The software provides information about

the recorder’s system operation status, and gives you remote access to the recorder for recovery

operations.

If one of the LED indicators on the recorder is flashing an error warning, the Server Administrator will display

details about the problem. For more information about the LED indicators, see LED Indicators on page11.

1. Open the Server Administrator.

lTo open the Server Administrator locally, double-click the Server Administrator shortcut icon

on the desktop.

lTo open the Server Administrator remotely, open a web browser and enter this address:

https://<recorder IP Address>:1311/.

For example: https://192.168.1.32:1311/ or https://localhost:1311/.

If you are using an intranet connection, your browser may display an error message. Allow the

browser to ignore the certificate warnings.

2. If asked to log in, enter the Windows software administrator username and password that was

configured for the recorder.

3. On the Server Administrator home page, the health of the system components are displayed in the

workspace on the right.

lTo see the health of other system components, expand and select a different component

from the System Tree on the left.

lThe table displayed in the workspace lists system components and their status:

The system component is running normally.

The system component has a non-critical warning.

The system component has a critical failure.

The system component status is unknown.

lTo see the details of a system component, select the system component from the workspace.

The Server Administrator is also used to customize the Redundant Array of Independent Disks (RAID)

settings, assign a hot spare and remotely monitor the system health. For more information about the features

in the Server Administrator, see the Help system provided in the software.

Advanced Features 7

Altri manuali per 3 Series

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Avigilon Hardware di rete

Avigilon

Avigilon VMA-AS1-16P Manuale utente

Avigilon

Avigilon NVR5-10GBASET-A1 Manuale utente

Avigilon

Avigilon HD-NVR3-STD-24TB Manuale utente

Avigilon

Avigilon 3 Series Manuale utente

Avigilon

Avigilon VMA-AS3X-IPMI Istruzioni operative

Avigilon

Avigilon HD NVR Series Manuale di istruzioni

Avigilon

Avigilon Premium NVR5 Series Manuale utente

Avigilon

Avigilon AI NVR Manuale utente

Avigilon

Avigilon Premium NVR5 Series Manuale utente

Avigilon

Avigilon ACC VMA-ENVR1-8P4 Manuale utente

Avigilon

Avigilon NVR5-10GBASET-A2 Manuale utente

Avigilon

Avigilon HD-NVR3-PRM-32TB Manuale utente

Avigilon

Avigilon VMA-AS1-8P Manuale utente

Avigilon

Avigilon NVR5-PRM-2NDCPU Manuale utente

Avigilon

Avigilon HD-NVRWS3-8TB Manuale utente

Avigilon

Avigilon Premium NVR5 Series Manuale utente

Avigilon

Avigilon HD-NVR3-STD-36TB Manuale utente

Avigilon

Avigilon NVR5-STD-10GBE Manuale utente

Avigilon

Avigilon NVR5-RAM-16GB-A Manuale utente

Avigilon

Avigilon NVR4-VAL-6TB Manuale utente

Avigilon

Avigilon VMA-AIA1-CG1 Manuale utente

Avigilon

Avigilon NVR5 PRM FIPS Manuale utente

Avigilon

Avigilon Premium NVR5 Series Manuale utente

Avigilon

Avigilon Premium NVR5 Series Manuale utente

Manuali Hardware di rete popolari di altre marche

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuale utente

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuale utente

Yudor

Yudor YDS-16 Manuale utente

D-Link

D-Link ShareCenter DNS-320L Manuale utente

Samsung

Samsung ES1642dc Istruzioni per l’uso

Honeywell Home

Honeywell Home LTEM-PV Istruzioni per il montaggio

evertz

evertz 7700 Series Manuale utente

D-Link

D-Link ShareCenter DNS-343 Manuale utente

Asante

Asante AsanteBridge 1012 Manuale utente

FireBrick

FireBrick FB2700 Manuale utente

Audiovox Electronics

Audiovox Electronics ARWH2T Manuale utente

ADC

ADC DSX-1 Manuale

NetComm

NetComm NF2 Manuale utente

Alcatel-Lucent

Alcatel-Lucent 5620 Manuale utente

Dell EMC

Dell EMC XC6420 Series Manuale utente

Lanner

Lanner NCA-1020A Manuale utente

Allied Telesis

Allied Telesis AT-TN121-A Manuale utente

Arista

Arista CCA-ETM-Q12 Manuale utente