Avipas AV-1180 Manuale utente
i
Model: AV-1180
HD Video Conferencing Camera
User Manual
V1.1
Please read this user manual
thoroughly before using.
www.avipas.com
Preface
Thanks for using this HD Video Conferencing Camera.
This manual introduces the functions, installation process and operation of the HD camera. Prior to installation and
usage, please read the manual thoroughly.
Precautions
This product can only be used in the specified conditions in order to avoid any damage to the camera:
1. Do not subject the camera to rain or moisture.
2. Do not remove the cover. Otherwise, you may risk receiving an electric shock. In case of unintended equipment
operation, contact an authorized engineer.
3. Never operate under unspecified temperature, humidity or power supply.
4. Please use soft dry cloth to clean the camera. If the camera is very dirty, clean it with diluted neuter detergent;
do not use any type of solvents, which may damage the surface.
Note
This is a class A production. Electromagnetic radiation at certain frequencies may affect the image quality of TV in home
environment.
iii
Electrical Safety:
Electric Safety
Installation and operation must accord with electric safety standard.
Use caution to transport
Avoid stress, vibration or soakage in transport, storage and installation.
Polarity of power supply
The power supply of this product is +12V, the max electrical current is 2A. Polarity of the power supply plug is
shown in the drawing below.
Installation precautions
Do not grasp the camera lens when carrying it. Do not touch camera lens by hand. Mechanical damage may
result from doing so.
Do not use in corrosive liquid, gas or solid environment to avoid any cover (plastic material) damage.
Make sure there is no obstacle within rotation range.
Do not power on before installation is completed.
Do not dismantle the camera
We are not responsible for any unauthorized modification or dismantling.
CAUTION!
Certain frequencies of electromagnetic field may affect the image of the camera.
iv
Content
Introduction .........................................................................................................................................................................................1
1.1 Product Schematic 1
1.2 Product Overview 2
1.3 Rear Panel Diagram 3
1.4 Bracket Installation 4
1.5 Accessory 4
1.6 Product Feature 5
1.7 Technical Specification 5
IR Remote Control................................................................................................................................................................................8
2.1 IR Remote Control Key 8
2.2 OSD Menu Setting 9
Network Connection ........................................................................................................................................................................133
3.1 Connection Method 13
3.2 Camera's Physical Address 13
3.3 Access Camera via IP 13
3.4 Web Interface 15
Serial Port Communication Control ...................................................................................................................................................23
4.1 Visca Protocol List 23
4.2 Pelco-D Protocol Command List 30
4.3 Pelco-P Protocol Command List 30
Maintenance and Troubleshooting ....................................................................................................................................................31
6.1 Camera Maintenance 31
6.2 Unqualified Application 31
6.3 Troubleshooting 31
1
Introduction
1.1 Product Schematic
Fig 1.1 Product Schematic
Description
：
1. Lens 5. ¼ -20 female thread Screw 9. DC12V Power Input Socket
2. Infrared Receiver 6. USB2.0 Type-A Port 10. RJ45 Network Connection Port
3. Indicator Light 7. RS485 Phoenix Connector
half-duplex
11. SDI Port
4. Installation Hole 8. 3.5 mm Audio Line-in Port
2
1.2 Product Overview
3
1.3 Rear Panel Diagram
The external interfaces of this product including: USB2.0, SDI, line-in, ethernet port, RS485, DC12V power supply, power
switch. The rear panel diagram is shown in below:
4
1.4 Bracket Installation
Steps of Wall Mount Installation
1.5 Accessory
When unpacked, check if all supplied accessories are included:
Table 1.5 Included Accessories
Power adapter
USB2.0 Cable
5
Included Accessory User manual
IR Remote Controller
Optional Wall Mount Bracket
1.6 Product Feature
Full HD Resolution: 1/2.8” 2.07M effective pixel SONY CMOS sensor, delivery the image resolution at
1080P with frame rate up to 60fps.
Optical Zoom Lens: 10x optical zoom, 5x digital zoom with 60.9° horizontal wide field of view.
Video outputs: Supports simultaneously SDI, USB2.0 and IP streaming (LAN) outputs.
Dual Stream outputs: Supports simultaneously main stream and sub stream output.
Video Compression: Support H.264, H.265
Audio input and encoding: 3.5mmAudio Line-in, embedded with IP streaming out with AAC, MP3, G.711A
audio encoding
Network Protocol: Support RTSP, RTMP, RTP multicast, ONVIF, GB/T28181 protocols
Control Protocol: Supports VISCA, PELCO-D, PELCO-P, ONVIF, UVC1.1 & VISCA-over-IP protocols and
automatic identified the protocols
Communication interface: Half-Duplex RS485 Phoenix connector
PoE (Power Over Ethernet): Supports PoE, IEEE standard 802.af. Ethernet cable can transmit Power, IP
control signal and video streaming output
USB2.0 Type-A Port: Able to connect with PC, Mac, or Chromebox computer easily. Compatible with any
web conferencing or streaming software
1.7 Technical Specification
Table 1.7-1 Camera Lens Parameter
Camera Parameter
Zoom 10x Optical, 5x Digital
Lens F1.6 ～ F3.0, f=4.7 mm～ 47 mm
Viewing Angle
Horizontal：6.43˚（N）～ 60.9˚（W）
Vertical：4.1˚（N）～ 40.1˚（W）
Sensor 1/2.8-inch SONY CMOS sensor, Effective Pixel 2.07M
Video Format
SDI：
1080P60/50/30/25/59.94/29.97;1080I60/50/59.94;
720P60/50/30/25/59.94/29.97
USB2.0
MJPG：1920*1080/1280*720 /1024*768
/1024*576/960*540/800*600/720*576/720*480/704*576/640*480 /640*360
/352*288/320*240/320*180/176*144P30;
H.264：1920*1080/1280*720 /1024*768
/1024*576/960*540/800*600/720*576/720*480/704*576/640*480 /640*360
/352*288/320*240/320*180/176*144P30;
6
H.265：1920*1080/1280*720 /1024*768
/1024*576/960*540/800*600/720*576/720*480/704*576/640*480 /640*360
/352*288/320*240/320*180/176*144P30;
YUY2：800*448 P15; 640*480/640*360 /432*240/320*180/P30
Minimum Illumination 0.05Lux (F1.8, AGC ON)
Digital Noise Reduction 2D﹠3D Digital Noise Reduction
White Balance Auto / Manual/ One Push
Focus Auto/Manual/One Push
Exposure Mode Auto/Manual/Shutter Priority/Aperture Priority/Brightness Priority
Aperture Auto/Manual
Shutter Speed 1/25s～1/10000s
Backlight Compensation ON/OFF
WDR OFF/ Dynamic level adjustment
Video Adjustment Brightness, Color, Saturation, Contrast, Sharpness, B/W mode, Gamma Curve
SNR ≥55dB
Table 1.7-2 Interface Parameter
Interface Parameter
Video Out
1xSDI (3GSDI) BNC female,
1x RJ45 IP streaming 10M/100M/1000M adaptive Ethernet port
1x USB2.0 type-A
1x LAN (RJ45)
IP Video Compression
LAN：H.264, H.265
USB 2.0：MJPG、H.264、H.265、YUY2
Audio Input 1x Double track 3.5mm LINE-IN
Audio Output SDI, IP Streaming
Audio Compression AAC, MP3, G.711A
Network Interface 1x RJ45
Network Protocols RTSP/RTMP, ONVIF, GBT28181, SRT, multicast mode
Control Port RS485, USB (eCam), RJ45
Control Protocol
Communication Protocol
VISCA/ Pelco-D/ Pelco-P
Support Baudrate: 115200/38400/9600/4800/2400
USB Communication
Protocol
UVC1.1（Video Communication Protocol）
Power Supply HEC3800 Outlet (DC12V)/ PoE (IEEE standard 802.3af)
Power Adapter AC110V~AC220V to DC12V/ 2.5A
Questo manuale è adatto per i seguenti modelli
2
Indice
Altri manuali Avipas Macchina fotografica digitale
