Avision FF-2111B Manuale utente

Mobile Scanner

User’s Manual

Regulatory model: FF-2111B

Avision Inc.

User’s Manual

Trademarks

Microsoft is a U.S. registered trademark of Microsoft

Corporation.

Windows 7, Windows 8, Windows 10, and Windows 11 are either

registered trademarks or trademarks of Microsoft Corporation in

the United States and/or other countries.

Other brands and product names herein are trademarks or

registered trademarks of their respective holders.

reproduced, transmitted, transcribed, stored in a retrieval

system, or translated into any language or computer language,

in any form or by any means, electronic, mechanical, magnetic,

optical, chemical, manual, or otherwise, without the prior

written permission of Avision Inc.

Material scanned by this product may be protected by

governmental laws and other regulations, such as copyright

laws, the customer is solely responsible for complying with all

such laws and regulations.

Warranty

The information contained in this document is subject to

change without notice.

Avision makes no warranty of any kind with regard to this

material, including, but not limited to, the implied warranties

of fitness for a particular purpose.

Avision shall not be liable for errors contained herein or for

incidental or consequential damages in connection with the

furnishing, performance, or use of this material.

User’s Manual

iii

FCC Radio Frequency Interference Statement

This product has been tested and found to comply with the

limits for a class B digital device, pursuant to Part 15 of the

FCC rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful

interference, and (2) this device must accept any

interference received, including interference that may

cause undesired operation. The FCC Class B limits are

designed to provide reasonable protection against harmful

interference in a residential installation. This equipment

generates, uses, and can radiate radio frequency energy

and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio

communications. However, there is no guarantee that

interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or

television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following

measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and

receiver.

Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

Consult your point of purchase or service representative

for additional suggestions.

User’s Manual

European Union Regulatory Notice

Products bearing the CE marking comply with the following EU

Directives:

Low Voltage Directive 2014/35/EC

EMC Directive 2014/30/EC

Restriction of the use of certain hazardous substances

(RoHS) Directive 2011/65/EU

RED (Radio Equipment Directive) (2014/53/EC)

This product satisfies the Class B limits of EN55032, EN55035,

and safety requirements of EN62368-1.

*This machine is certified as Class 1 LED product.

User’s Manual

Disposal of Waste Equipment by Users in Private Union

This symbol on the product or on its packaging indicates that

the product can not be disposed of with your other household

waste. Instead it should be sent to appropriate facilities for

recovery and recycling in an effort to protect human health and

the environment. Fore more information about where you can

drop off your waste equipment for recycling, please contact

your local city office, your household waste disposal service or

the shop where you purchased the product.

System Requirements

CPU:

Intel®Core™ 2 Duo or higher

Memory:

32 bit: 2 GB

64 bit: 4 GB

Optical Drive:

DVD-ROM Drive

USB Port:

USB 2.0

Compatible

Operating

System:

Microsoft Windows 7, Windows 8 (32 bits/64

bits), Windows 10 (32 bits/64 bits)

User’s Manual

Product Safety Guide

Please clearly read all these instructions, and follow all instructions

and warnings before installing and using the device.

The following indications are used in this document to obviate any

chance of accident or damage to you and/or the device.

WARNING

Indicates potentially hazardous situations, which

if instructions are not followed, could result in

death or serious injury.

CAUTION

Indicates a potentially hazardous situation

which, if instructions are not followed, may

result in minor or moderate injury or damage to

property.

WARNING

Use only the USB cable that came with your device and avoid

abrasions, cuts, fraying, crimping, and kinking. Using any

other USB cable could cause fire, electrical shock, or injury.

Place the device close enough to the computer so that the

interface cable can easily reach between the device and the

computer.

Do not place or store the device:

Outdoors

Near excessive dirt or dust, water, or heat sources

In locations subject to shocks, vibrations, high

temperature or humidity, direct sunlight, strong light

sources, or rapid changes in temperature or humidity

Do not use the device with wet hands.

Never disassemble, modify, or attempt to repair the device or

device option by yourself, except as specifically explained in

the device's documentation. This could cause fire, electrical

shock, or injury.

User’s Manual

vii

Unplug the device and the USB cable, and refer servicing to

qualified service personnel under the following conditions:

Liquid has entered the device.

Object has entered the device.

The device has been dropped, or the case has been

damaged.

The device does not operate normally (i.e. appearance of

smoke, strange smell, odd noise, etc.), or exhibits a

distinct change in performance.

Unplug the device and the USB cable before cleaning.

CAUTION:

Do not locate the device on rackety or aslope tables. Do not

locate the device on unstable surface. The device may fall

down and this may result in injury.

Do not place heavy objects on the unit. It may cause

unbalance and the device may fall down. This may result in

injury.

Store the AC Power cord/USB cable bundled out of the reach

of children to avoid the risk of injury.

Keep plastic bags bundled out of the reach of children or

throw them away to avoid the danger of suffocation.

If you are not going to use the device for a long period,

unplug the USB cable from the electrical outlet.

User’s Manual

viii

FCC Caution:

Any changes or modifications not expressly approved by the

party responsible for compliance could void the user’s authority

to operate this equipment.

This device is intended only for OEM integrators under the

following conditions:

1) The antenna must be installed such that 20 cm is

maintained between the antenna and users.

2) The transmitter module may not be co-located with any

other transmitter or antenna.

IMPORTANT NOTICE:

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set

forth for an uncontrolled environment. This equipment should

be installed and operated with minimum distance 20cm

between the radiator & your body. To maintain compliance with

FCC RF exposure compliance requirements, please avoid direct

contact to the transmitting antenna during transmitting.

IC Notice:

Operation is subject to the following two conditions:

1) This device may not cause interference and

2) This device must accept any interference, including

interference that may cause undesired operation of the device.

IMPORTANT NOTE:

IC Radiation Exposure Statement:

This equipment complies with IC radiation exposure limits set

forth for an uncontrolled environment. End users must follow

the specific operating instructions for satisfying RF exposure

compliance. This equipment should be installed and operated

with minimum distance 20cm between the radiator & your body.

This transmitter must not be co-located or operating in

conjunction with any other antenna or transmitter.

User’s Manual

Règlementd’ Industry Canada

Les conditions de fonctionnement sont sujettes à deux

conditions:

(1) Ce périphérique ne doit pas causer d’interférence et.

(2) Ce périphérique doit accepter toute interférence, y compris

les interférences pouvant perturber le bon fonctionnement de

ce périphérique.

User’s Manual

Warning and Precautions of the lithium-ion battery

Warning:

Danger warning to prevent the possibility of the battery

from leaking, heating, explosion, please observe the

following precautions:

Don’t immerse the battery in water and seawater.

Please put it in cool and dry environment if no using.

Do not discard or leave the battery near a heat source

as fire or heater.

Being charged, using the battery charger specifically

for that purpose.

Don’t reverse the positive and negative terminals.

Don’t connect the battery to an electrical outlet directly.

Don’t connect the positive and negative terminal

directly with metal objects such as wire. Short

terminals of battery is strictly prohibited, it may

damage battery.

Do not transport and store the battery together with

metal objects such as necklaces, hairpins.

Do not strike, throw or trample the battery.

Do not directly solder the battery and pierce the

battery with a nail or other sharp object.

Do not use lithium ion battery and others different

lithium polymer battery model in mixture.

Prohibition of use of damaged cells.

Don’t bend or fold sealing edge. Don’t open or deform

folding edge. Don’t fillet the end of the folding edge.

Don’t fall, hit, bend battery body.

Battery pack designing and packing Prohibition injury

batteries.

Never disassemble the cells.

Keep the battery away from babies.

Any components contacting these two edges, they

must be insulated.

Indice

Altri manuali Avision Scanner

Avision

Avision AV5200 Manuale utente

Avision

Avision FB6000E Manuale utente

Avision

Avision FL-1006S Manuale utente

Avision

Avision AD3100 Series Manuale utente

Avision

Avision FF-2010B Manuale utente

Avision

Avision BF-1008S Manuale utente

Avision

Avision AV630CS Manuale utente

Avision

Avision AV810CPlus Manuale utente

Avision

Avision SS6200 Manuale utente

Avision

Avision ScanQ Manuale utente

Avision

Avision FF-0506 Manuale utente

Avision

Avision FF-1902B Manuale utente

Avision

Avision AD6090-IQ Manuale utente

Avision

Avision AV260C Plus Manuale utente

Avision

Avision AD280F Manuale utente

Avision

Avision FT-1109H Manuale utente

Avision

Avision Multifunction Scan Center Manuale utente

Avision

Avision 300500001 Manuale utente

Avision

Avision AV100C Manuale utente

Avision

Avision AD340GWN Manuale utente

Avision

Avision BT-2202B Manuale utente

Avision

Avision AV332 Series Manuale utente

Avision

Avision AD 250F Manuale utente

Avision

Avision PaperAir 215L Manuale utente

Manuali Scanner popolari di altre marche

Plustek

Plustek Scanner Manuale utente

Z/I Imaging

Z/I Imaging PhotoScan 2001 Manuale utente

Renkforce

Renkforce DS100-5M Manuale utente

Image Access

Image Access WideTEK A2 Manuale utente

Canon

Canon imageFORMULA CR-120N Manuale utente

Fujitsu

Fujitsu FI-4860C2 Manuale utente

GeoSlam

GeoSlam ZEB Horizon Istruzioni per l'installazione

Kodak

Kodak i5800 Scanner Manuale utente

Kodak

Kodak i7300 Manuale utente

Revopoint

Revopoint POP Manuale utente

Fujitsu

Fujitsu fi-4860C Manuale utente

Eddyfi Technologies

Eddyfi Technologies Floormap X Manuale utente

Faselase

Faselase F6 Manuale utente

Fujitsu

Fujitsu CardMinder Manuale utente

Uniden

Uniden BC340CRS Manuale utente

Infinite Peripherals

Infinite Peripherals INFINEA TAB M Manuale utente

Mustek

Mustek PageExpress 4800 Pro Manuale utente

Optex

Optex 750830 Manuale utente