Avital Phoenix 2 Manuale utente

RA2 Owner's Manual Rev. B - 0499

Standard Features of Remote Access2

System

þ5-Year Warranty —Avital Technologies guarantees the operation of the

control unit and remote controls for five full years from the date of

purchase (see the enclosed warranty card for details).

þTwo AviGlo4-Button/9-Channel Remote Controls —Designed for

easy fingertip control, these 4-button remotes allow you to operate your

car’s power door locks as well as optional accessories from up to 100 feet

away. Once exposed to light, the AviGlo remote control buttons will glow,

making the buttons visible in the dark.

þUser-Friendly Programming —With a few flicks of the valet switch, you

can easily customize several features of your system to fit your lifestyle.

(See "User-Programmable Features" on page 8.)

þStarter Disable Capability —With the addition of an optional relay, your

Remote Access2

will electronically disengage your vehicle’s starter motor

every time you remotely lock all the doors. If a thief gets into your car, he

won’t be able to start the engine even if he breaks open the steering

column and forces the ignition switch. In fact, he wouldn’t be able to start

the engine if he had a copy of your car keys. This “Starter Disable” feature

may also qualify you for a discount on your vehicle insurance.

þUser-Programmable Passive Starter Disable —If the optional starter

disable relay was added, you can program your system to automatically

disable the starter 30 seconds after the ignition key is turned "OFF."

þUser-Programmable Passive Door Lock —You can program your Remote

Access2

system to automatically lock all the doors if you forget to lock them

with your remote control. You must have the "Passive Starter Disable" feature

programmed ON to access the Passive Door Lock feature.

þLED System Status Indicator —A flashing red light on the dashboard or

console warns away thieves while visually confirming that the doors are

locked and the Starter Disable is engaged.

þOne-Step Remote Control Code Learning —You can easily add up to

four Avital remote controls to your system. (See "Programming Table for

Remote Controls" on page 9.)

RA2 Owner's Manual Rev. B - 0499

þInstant Remote Control Code Deletion —Removes the code of a lost or

stolen remote so it can no longer control your system. (See "Programming

Table for Remote Controls" on page 9.)

þElectronic Scan Prevention (ESP) —Some thieves use digital code

"scanners" that rapidly transmit one remote control code after another until

they hit the one code that activates the unlock function of a keyless entry

system. Electronic Scan Prevention recognizes scanners and blocks their

codes to prevent unlocking by anyone but you.

þRemote Panic with Safety Locks™ (optional) —In a threatening

situation, you can activate a siren/horn, flash the parking lights and unlock

the doors for immediate entry into your vehicle. (Requires the addition of

an optional siren or interfacing with the vehicle horn.)

þAudible Lock/Unlock Confirmation Capability — This programmable

feature will chirp the siren or beep the horn two times when the LOCK

button is pressed and once when the UNLOCK button is pressed. (Requires

the addition of an optional siren or interface with the vehicle horn).

þVisual Confirmations — The Remote Access2

will flash

your vehicle’s

parking lights to confirm door locking and unlocking.

þInterior Light Illumination — Turns on the interior lights for 30 seconds

when you remotely unlock or until the ignition key is turned "ON."

þUser-Programmable Illuminated Exit —The system can be programmed

to turn on the interior lights for 30 seconds after the ignition key has been

turned "OFF."

þRemote-Controlled Door Lock/Unlock —Allows you to lock and unlock

your doors without using your key.

þTwo-Stage Unlock Capability —For personal safety, when you press the

remote control UNLOCKbutton, only the driver’s door will unlock. Simply

press the remote button again to unlock the passenger doors (may require

an additional relay).

þUser-Programmable Ignition-Controlled Door Lock/Unlock —

Automatically locks your vehicle’s doors when you turn the ignition "ON"

and unlocks them when you turn the ignition "OFF."

RA2 Owner's Manual Rev. B - 0499

þProtected Valet Mode — If you have the Passive Lock and Passive Starter

Disable features turned on, Valet Mode temporarily overrides these feature

so you can have your car washed, serviced or valet parked without giving

up your remote control. You can put the system in Valet Mode via a flick of

a hidden switch. Just repeat the action to return the system to its normal

operating mode.

þTwo Remote-Controlled Accessory Outputs —Allows you to add up to

two remote-controlled optional accessories such as a remote engine starter,

remote headlight activation, window roll-up/down and many other

available accessories.

þRemote Trunk Release Capability —Allows you to activate your

vehicle’s electronic trunk release from up to 100 feet away. (May require an

optional relay. For vehicles with a manual trunk release, a trunk unlock kit

is also required.)

RA2 Owner's Manual Rev. B - 0499

Operating Your Remote Access2

System

Remote Controls

Included with your system are two AviGlo™ 4-button/9-channel remote

controls. Once exposed to light, the AviGlo remote control buttons will glow,

making the buttons visible in the dark.

Your remote control (remote) is a miniature transmitter powered by a small +12

volt battery. Obstructions, electrical or radio interference, weather conditions,

window tint or a weak battery can reduce this range. Your remote is the key to

your system and can be used to lock and unlock your doors, "pop" your trunk,

control a remote engine starter or other optional accessories

Your system can accept up to four Avital remote controls. Additional remote

controls and remote control batteries can be purchased from any authorized

Avital dealer, or by calling Avital Technologies toll-free at 1-800-253-0334

(within the U.S.) or 1-847-215-2233.

To Lock the Doors

Press the remote control LOCK button for 1-2 seconds. The doors will lock,

the parking lights will flash twice and the dash mounted LED will blink slowly.

If the optional panic feature was connected, the horn or siren will sound two

times. This feature can be programmed ON or OFF. (See "Programming Table

for System Features" on page 8.) If the optional starter disable relay was added,

the starter will be disabled.

To Unlock the Doors

Press the remote control UNLOCKbutton for 1-2 seconds. The doors will

unlock, the interior lights will turn on, the parking lights will flash once and

the dash mounted LED will turn off. If the optional panic feature was

connected, the horn or siren will sound one time. If the optional starter disable

was added, it will disengage allowing you to start the vehicle.

Two-Stage Unlock

If the optional two stage unlock feature was installed, press the UNLOCK

button for 1-2 seconds. The driver door only will unlock. Within 3 seconds,

press the UNLOCKbutton again and the passenger doors will unlock.

User-Programmable Ignition-Controlled Door Lock/Unlock

For the ultimate in security and convenience, the Remote Access2

will

automatically lock the doors when the ignition key is turned "ON" or the

engine is started, and the doors will unlock when the ignition key is turned

"OFF." This feature can be programmed ON or OFF. (See "Programming Table

for System Features" on page 8.)

RA2 Owner's Manual Rev. B - 0499

User-Programmable Passive Starter Disable

If the optional starter disable relay was added, your system can be

programmed to automatically disable the starter 30 seconds after the ignition

key is turned "OFF." (See "Programming Table for System Features" on page 8.)

1.Turn the ignition key to the "OFF" position.

2.The LED will flash rapidly for 30 seconds.

3.The LED will then flash slowly to indicate the starter has been disabled.

User-Programmable Passive Door Lock

If the Passive Starter Disable and Passive Lock features are programmed "ON,"

the system will automatically disable the starter (optional) and lock the doors

30 seconds after the ignition key is turned "OFF." (See "Programming Table for

System Features" on page 8.)

1.Turn the ignition key to the "OFF" position and remove the key.

NOTE: Keep the key in your possession.

2.The LED will flash rapidly for 30 seconds.

3.The doors will lock and the LED will flash slowly to indicate the starter has

been disabled.

Remote Panic with Safety Locks™ (optional)

In a threatening situation, you can activate Remote Panic with Safety Locks .

When activated, the siren/horn will sound and the parking lights will flash. If

you are inside your vehicle and the ignition key is "ON," the doors will lock. If

you are outside the vehicle with the ignition key "OFF," the doors will unlock

allowing you to move to safety. (Requires the addition of a siren or interfacing

with your vehicle horn.)

Activate

1.Press the remote control LOCKbutton for 3-4 seconds.

2.The siren/horn will sound and the parking lights will flash on and off.

3.If the ignition key is "OFF," the doors will unlock. If the ignition key is

"ON," the doors will lock.

Deactivate

1.Press the remote control LOCKbutton for 1-2 seconds.

2.The siren/horn will shut off and the parking lights will stop flashing.

Interior Light Illumination

Whenyou unlockthe doorswith yourremote control,the systemwill turnon the

vehicle’sinteriorlight(s)for 30secondsoruntil theignitionkeyis turned "ON."

RA2 Owner's Manual Rev. B - 0499

User Programmable Illuminated Exit

The system can be programmed to turn on the interior lights for 30 seconds

after the ignition key has been turned "OFF." Turning the ignition key "ON" or

remotely locking the doors will turn off the interior lights. (See "Programming

Table for System Features" on page 8.)

Remote-Controlled Trunk Release

Press the remote control TRUNKbutton for 1-2 seconds. The trunk will

unlatch (pop open).

Remote-Controlled Accessories

You can operate up to two remote-controlled accessories such as a remote

engine starter, window roll-up/down, headlight activation, fuel filler door

release or remote garage door opener.

To operate one of the accessories, press the remote control OPTIONbutton

for 1-2 seconds to activate or deactivate the optional accessory.

By pressing the remote control LOCK and UNLOCK buttons simultaneously

for 1-2 seconds, you can operate an additional optional accessory.

Valet Switch

The valet switch is a small hidden toggle switch that allows you to control

many of the system's programmable features and prevents Passive Lock and/or

Passive Starter Disable. In the event of a lost or stolen remote control, you can

use this switch to bypass (shut off) the entire system and add or delete remote

controls. (See the "User-Programmable Features" on page 8).This switch can

onlybe controlled with the use of your ignition key.

NOTE:Besureto have your dealer show you wherethevaletswitchis located.

Protected Valet Mode

If the Passive Lock and/or Passive Starter Disable features are turned on, you

should use your valet switch to place your system in Protected Valet Mode

whenever your car is being serviced by mechanics, car wash personnel or

driven by a valet attendant. While in Protected Valet Mode, all system features

are bypassed to prevent unauthorized or accidental activation.

To Turn on Protected Valet Mode

1.Turn your ignition key to the "ON" position or start the engine.

2.Flick the valet switch to the "ON" position.

3. The LED will turn on solid red to indicate the system is in Protected Valet

Mode.

4.Turn the ignition key to the "OFF" position.

RA2 Owner's Manual Rev. B - 0499

To Turn OFF Protected Valet Mode

1.Turn your ignition key to the "ON" position or start the engine.

2.Flick the valet switch to the "OFF" position.

3. The LED will turn off to indicate the system is no longer in Protected Valet

Mode.

4.Turn the ignition key to the "OFF" position.

LEDStatus

OffSystem is disarmed

On solidIn Protected Valet Mode

Slow flashSystem is armed

Rapid flash Passive arming

RA2 Owner's Manual Rev. B - 0499

User-Programmable Features

All system and remote control programmable features are accomplished by

turning the ignition key "ON" (or starting the engine) and flicking the valet

switch on and off a preset number of times.

The system also allows you to add new remote controls in one step, delete lost

or stolen remote controls or rearrange the factory preset remote control

functions.

1.Remove the system from Protected Valet Mode. Programming cannot be

accessed while the system is in Protected Valet Mode indicated by the LED

on solid red.

2.Select the feature you wish to program from the "Programming Table for

System Features" below or the "Programming Table for Remote Controls"

on page 9.Note the number of beeps associated with that feature.

3.Turn the ignition key to the "ON" position.

4.Within 10 seconds, begin flicking the valet switch on and off. The siren

will beep once each time you flick the switch on then off.

5. Continue flicking the switch on and off, counting the number of beeps.

NOTE: Stop when you reach the number of beeps associated with your

chosen feature.

6.Follow the "Secondary Action." You will hear a number of beeps to

confirm that you have changed the setting of that feature.

7.Turn the ignition key to the "OFF" position.

8.Repeat steps 1-7 for any other feature you wish to program.

Programming Table for System Features

FeatureFactory

Setting# of

Beeps Secondary Action

Ignition Controlled

Door Lock/UnlockON4Wait 3 seconds. The system will beep once

for OFF, twice for ON.

Illuminated Exit ON8Wait 3 seconds. The system will beep once

for OFF, twice for ON.

Passive Starter Disable OFF 9Wait 3 seconds. The system will beep once

for OFF, twice for ON.

Passive Door Lock OFF 10 Wait 3 seconds. The system will beep once

for OFF, twice for ON.

Audible Lock/Unlock

Confirmation OFF 13 Wait 3 seconds. The system will beep once

for OFF, twice for ON.

Altri manuali per Phoenix 2

Indice

Altri manuali Avital Allarme auto

Avital

Avital 3300L Manuale utente

Avital

Avital AMX58 Manuale utente

Avital

Avital Hurricane 2 Manuale utente

Avital

Avital AviStart 6000 Manuale utente

Avital

Avital AviStart 6001 Manuale utente

Avital

Avital AviStart 3100 Istruzioni per l'installazione e il funzionamento

Avital

Avital Remote Access Manuale utente

Avital

Avital Phoenix 2 Manuale utente

Avital

Avital 5103 Manuale utente

Avital

Avital AviStart 3100 Manuale utente

Avital

Avital 3300L Manuale utente

Avital

Avital 4308L Manuale utente

Avital

Avital Tornado Manuale utente

Avital

Avital 2100 Manuale utente

Avital

Avital 2200 Manuale utente

Avital

Avital Phoenix 2 Manuale utente

Avital

Avital 4003 Manuale utente

Avital

Avital 5103 Manuale utente

Avital

Avital AVISTART 4000 Manuale utente

Avital

Avital 5303 Manuale utente

Avital

Avital Paging Adaptor 5810 Manuale utente

Avital

Avital G5103 Manuale utente

Avital

Avital 2000 Manuale utente

Avital

Avital AviStart 6500 Manuale utente

Manuali Allarme auto popolari di altre marche

Clifford

Clifford 3606X Manuale utente

Ultra Start

Ultra Start 2500M SERIES Manuale utente

Ultra Start

Ultra Start 650 Series Manuale utente

Audiovox

Audiovox Prestige Platinum+ APS-511C Manuale utente

Sparkrite

Sparkrite SRA8 Manuale utente

Viper

Viper 4708V Manuale utente

Federal Signal Corporation

Federal Signal Corporation Pathfinder Siren Series Manuale

Falcon

Falcon Predator XL3 Guida utente

Audiovox

Audiovox Auto Security XR91 Istruzioni operative

Clifford

Clifford Sabre II Manuale utente

CrimeStopper

CrimeStopper CS-8717 Guida rapida

Ultra Start

Ultra Start 450 SERIES Manuale utente

Scytek electronic

Scytek electronic Vectra X3 Manuale utente

Excalibur

Excalibur AL-1860-EDPB Manuale utente

Clifford

Clifford CYBER 2 Manuale utente

Gemini

Gemini 7057 Manuale utente

FlashLogic

FlashLogic FLRSBA PRESTIGE Manuale utente

Magicar

Magicar FAI-440 Manuale utente