2/2
1.Remove all the packing before use. Please contact with your vendor if
you find any destroyed or missing parts.
2.Place the machine horizontally and loose the tank lid to pour the high
quality fogger liquid.
3.Connect the machine with proper power supply (AC 230V, 50Hz).
4.Plug the remote control into the machine.
5.When the indictor of the remote control light on, you can press the
control button if you want it to spray fog.
6. It is normal for your fogger to have a recycling period, that is the unit
shuts itself down for a short period in order to heat up to temperature
after long bursts. During this time no fog can be produced. When the unit
is ready for action again, the red indictor on the remote control will
illuminate.
7.Turn off the switch when you want to stop spraying.
8.Unscrew 3 base screws and remove reflected bowl, then change the lamp
of the same specified.
Note: The lamp comes ON only when the smoke machine is activated.
Maintenance & Servicing
1.Unsuitable fogger liquid may result in blockages or leakage. Please
choose and use Skytronic high quality fog liquid.
2.Please clean the machine after not more than 40 hours with the mixture
consisting of 80% pure water and 20% vinegar as follows.
1) Before using, dismantle and clean the filter with vinegar to ensure
there is no remainder.
2) Empty the tank, and then pour in clean liquid instead of fogger liquid
again for next operation.
3) Assemble the filter and pour in the fogger liquid again for next
operation.
3.Cut off the power when you pour fogger liquid, and check liquid, fuse,
control switch and power plug carefully.
4.If no exceptions turn on and push the button 30 seconds, if no fog sprays.
Please contact with your vendor.
5.For long idleness be sure to unplug the power.
6.Ensure of the periodical cleansing of the lens for better light effect.
