AVstumpfl mobile AT64-SHIFT Manuale utente
28HS
AT64-SHIFT
INSTRUCTION
2
MOBILE SCREEN
(MONOBLOX 64)
Compact transport volume
due to patented snap joint technology
Special extruded and hardened aluminum alloy
allows maximum stability at minimum weight.
FRAME ADAPTERS
Frame adapters and accessories in yellow bag.
LOCKING- AND SLIDING MODULES
AT64-SHIFT EXTENSION
21“ (53 cm)
AT64-SHIFT ENDMODULE
3
PROJECTION SCREEN BAG
Lined storage bag for projection screen
SOFTBAG WITH WHEELS
padded , tearproof nylonbag
with wheels and carrying straps
small 128x25x30 cm
big 133x31x35 cm
AT64-SHIFT
BASE MODULE
26“ (67 cm)
ASSEMBLY INSTRUCTION
AT64-SHIFT EXTENSION
42“ (107 cm)
4
INDEX
GENERAL 5
STANDARDS, REGULATIONS
AND TECHNICAL SPECIFICATION 5
SAFETY 5-8
OPERATION, MAINTENANCE and SERVICE 8
WARRANTY 9
AT64-SHIFT 10
LEG HEIGHTS 11
FRAME SETUP 12
ADAPTERS 13
LEG LENGTH/ADAPTER POSITIONING 13
LOCKING & SLIDING MODULES 14
UNLOCK 15
LEG ASSEMBLY 15-16
RELOCK 17
SURFACE MOUNTING 17
RAISING UP 18
TELESCOPIC SUPPORT 18
HEIGHT ADJUSTMENT UP 19
SAFETY CATCH 20
HEIGHT ADJUSTMENT DOWN 20
DISASSEMBLY 21
5
GENERAL
AT64-SHIFT
The AT64-SHIFT leg makes it possible for JUST ONE person to easily adjust a mobile projection screen‘s
height, without having to disassemble it rst.
The AT-64-SHIFT can be combined with all existing AV Stump screen systems.
STANDARDS, REGULATIONS and TECHNICAL
SPECIFICATION
This projection screen is in accordance with the safety regulations in DIN standard 19045 and
DIN 56950. The screen fabric is comply with DIN 4102 part 1 and the specications of the according
data sheet. For the technical details and projection-specic material parameters please refer to the
corresponding product data sheet: www.AVstump.com/projectionmaterials
Detailed data of frame components, legs and projection surface can be found on the type labels on
each component and on the labeled soft bags, roller bags or ight cases.
SAFETY
GENERAL INFORMATION FOR THE MANUAL AND SAFETY
This operating manual forms part of the projection screen system and enables a safe and ecient
operation. The safety section provides information about important safety aspects for the protection
of persons, frame and projection materials. Task-related warnings/notes are also contained in the
individual chapters. Read instructions through completely before proceeding and keep for future
reference. You can nd manuals electronically on our website: www.AVstump.com/downloads
PACKAGING MATERIAL
WARNING
Danger of suocation!
• Keep packaging material and foils away from children.
• Do not let children play with packaging material.
Unpack without cutter or any other sharp tool to avoid damaging of
the projection screen. Remove packaging materials by hand. Unpack
projection surface after assembling of the frame.
6
SET UP-ASSEMBLY
MECHANICAL HAZARDS
Projection surface damage in case of faulty assembly or set up.
Make sure all frame parts assembled correctly and all hinges and joints are locked before one unfold and
attach the projection surface.
Please be careful
not to pinch
your ngers!
FALLING OVER
WARNING
Falling over of a projection screen can cause severe injury or death!
To avoid falling over:
• Make sure that the projection screen is in level.
• Mind the maximum set-up height of the legs - Please follow the instructions in chapter LEG HEIGHTS (site 11)
• Prevent air draft
• Use additional weights on the base prole of the leg to gain higher stability.
• Use suspension points (e.g.: EasyFly) according to the overall system weight for additional safeguarding.
Do not put additional load on the screen frame!
Do not use outdoors!
FRAME AND LEG COMPONENTS
Foldable snap joints, corner hinges and plug-in connections can
lead to injury to the hands (body parts). Please be careful not to
pinch your ngers!
Danger of injury due to improper assembly.
Make sure all frame parts assembled correctly and all hinges
and joints are locked before raising screen to standing
position. Falling parts can cause severe injury or death!
7
WARNING
Mobile projection screens are developed for indoor use only.
Failure to follow warning may result in personal injury due to unforeseen acts of nature.
Any damage and consequential damage caused by outdoor use is not covered by warranty.
BASIC SAFETY REQUIREMENTS
Basic safety requirements for „ying“ projection screens and wall- or ceiling mounting!
If persons are able to stand under the loads, fastening points and slings must not be loaded more than
half the value of the load bearing capacity stated by the manufacturer.
When planning the event or production, not only dead loads but also dynamic forces, potential
breakdown loads and additional loads during operation, as well as during assembly and dismantling
must be taken into account.
Observe the local safety regulations!
FLYING SCREEN
If a modular projection screen is used as a “ying” (free hanging) screen, then all plug-in and clamp
connections must be secured against becoming loose and falling.
It is not allowed to use the projection surface holding the frame parts in position!
Falling parts can cause severe injury or death!
Please make sure that all components are secured safely before raising screen to standing position and
lifting. Use the necessary number of suspension points (e.g.: EasyFly) according to the overall system
weight. A second/auxiliary safeguarding system is mandatory (e.g. steel rope catch)
Please follow the detailed instruction in the manual.
WALL- or CEILING MOUNTING
Before mounting, make sure that the wall or ceiling, as well as the xing points meet the safety
requirements of the local standards and the required load can be beared.
Danger of injury
due to improper
disassembly.
Falling parts can
cause severe injury
or death!
Beware of
pinch points.
It is not allowed to use the projection surface holding the frame
parts in position! Falling projection screens or parts can cause
severe injury or death!
Please be careful
not to pinch
your ngers!
8
DISASSEMBLY
For disassembly the same safety instructions apply as for assembly and set up. Bring down a projection
screen with the appropriate number of people to avoid falling over of the screen.
OPERATION, MAINTENANCE and SERVICE
FRAME ELEMENTS, LEGS and ACCESSORIES:
The frame elements, legs and additional elements are maintenance-free.
PROJECTION SURFACE:
The projection surface is packed into a separate lined soft bag to avoid any damage by the frame parts,
bleaching and discoloration.
Additionally, following instructions have to be adhered to:
Do not allow the projection surface to get in contact with sharp objects.
Do not bring printed and coloring objects (instructions, magazines, etc.) in contact with the
projection surface!
Do not write on the projection surface!
Colors penetrate the projection surface and cannot be cleaned anymore!
Store the projection surface cleaned and dry at room temperature only!
The projection surface has to be folded with the front layer inside; in order to avoid soiling and damage.
When folding the projection surface insert the enclosed foamed plastic foil between snap buttons and
surface to avoid permanent marks.
COLD BREAK
A projection foil must never be stored or transported below 5° C. There is a risk of a cold break! The
lm becomes very brittle and splinters like glass! When transporting the projection surface at low
temperatures do not unfold the surface unless it has reached its full elasticity at room temperature.
Otherwise there is the risk of cold break of the projection screen.
The ideal temperature range for assembling folding screens to prevent damaging the surface is 54°-82° F
(12°-28° C). Assembling below recommended temperatures may damage surface and void warranty
CLEANING OF THE PROJECTION SURFACE
Use a white clean cotton cloth saturated with clear water (optionally mild soap water) and gently
wipe the area in one direction (no circular motion). Wipe dry with another cotton cloth.
To clean a stubborn stain, use methylated spirit and follow the same procedure.
Clean rear projection surfaces in case of imperative only!
Falling parts can cause severe injury or death!
9
WARRANTY
The warranty period for production deciencies is 5 years for the frame elements and 24 months
for the projection surface.
Mobile projection screens are developed for indoor use only.
Any damage and consequential damage caused by outdoor use is not covered by warranty.
The general terms and conditions are available at http://avstump.com/agb
LIMITATION OF LIABILITY
All the details in this manual were compiled in consideration of the standards and legal regulations
applicable at this time, as well as the experience of the manufacturer and qualied sta. The
manufacturer accepts no liability for damage to persons or things (projection screen, other devices,
goods, etc.) resulting from:
Non-observance of the manual and the regulations/safety instructions contained therein.
• Failure to comply with the local safety regulations.
• Inappropriate use (misuse).
• Use of unauthorized and non-trained sta.
• Unauthorized equipment conversions and technical modications by the operator himself.
• Use of spare parts not approved by the manufacturer.
• Typesetting and print errors.
Failure to observe the above points will invalidate the warranty claims.
Technical specications are subject to change without notice.
The local regulations and safety regulations and the essential safety requirements apply for the use of
this projection screen.
DISPOSAL
At the end of its lifetime this product must not be disposed of with normal household waste but needs
to be taken to a collection site for recycling.
Separate disposal of the product makes an important contribution towards environmental protection.
Frame components and legs are made of aluminum and steel.
The projection material is PVC vinyl.
Contact your local disposal company for the address of a collection center.
Subject to modications, errors expected !
10
AT64-SHIFT
An AT64-SHIFT leg consists of a base module with
telescopic support, four extensions with a length
of 42“ (107 cm) and an additional extension, half as
long with 21“ (53 cm), as well an end module as a
safety catch on top of the leg.
GENERAL PRODUCT FEATURES:
• easy height adjustment in assembled condition
• tool-free automatic securing of the height adjustment
• 8 dierent lengths possible
• compatible with all mobile AV Stump screen systems
• Altitude: min: 3,5" (9cm) - max: 76,5" (194cm)
• adjustable in steps of 1" (25,4mm)
• Weight (550cm): 15,3kg
• hardened aluminum alloy EN-AW 6063
• optional black anodized
• 5 years of warranty
base module 42“ (107cm) 42“ (107cm) 42“ (107cm) 42“ (107cm) 21“ (53cm)
end module
Indice
Altri manuali AVstumpfl Schermo di proiezione
AVstumpfl
AVstumpfl INLINE 90 Manuale utente
AVstumpfl
AVstumpfl DECOFRAME Manuale utente
AVstumpfl
AVstumpfl FULLWHITE Manuale utente
AVstumpfl
AVstumpfl FULLWHITE Manuale utente
AVstumpfl
AVstumpfl Magnum Manuale utente
AVstumpfl
AVstumpfl Desertscreen Manuale utente
AVstumpfl
AVstumpfl MONOBLOX 32 Manuale utente
AVstumpfl
AVstumpfl Vario 32 Manuale utente
AVstumpfl
AVstumpfl MONOBLOX 32 Manuale utente
AVstumpfl
AVstumpfl VARIOCLIP Manuale utente
