Avtech DGC5205TSE Manuale utente
888Z
d5205tse_V0.9
5MP IR Dome Camera User Manual
Please use this camera with a recorder which supports HD video recording.
Please read the instructions thoroughly before using the product.
C
CA
AU
UT
TI
IO
ON
N
R
RI
IS
SK
K
O
OF
F
E
EL
LE
EC
CT
TR
RI
IC
C
S
SH
HO
OC
CK
K
C
CA
AU
UT
TI
IO
ON
N:
:
To reduce the risk of electric shock, do not expose this apparatus to rain or moisture.
Only operate this apparatus from the type of power source indicated on the label.
The company shall not be liable for any damages arising out of any improper use, even if we have been advised of the possibility of
such damages.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence
of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a
risk of electric shock to persons.
This exclamation point within an equilateral triangle is intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the literature accompanying the appliance.
ROHS Announcement
All lead-free products offered by the company comply with the requirements of the European law on the Restriction
of Hazardous Substances (RoHS) directive, which means our manufacture processes and products are strictly
“lead-free” and without the hazardous substances cited in the directive.
The crossed-out wheeled bin mark symbolizes that within the European Union the product must be collected
separately at the product end-of-life. This applies to your product and any peripherals marked with this symbol. Do
not dispose of these products as unsorted municipal waste.
CE Mark
This apparatus is manufactured to comply with the radio interference.
The company does not warrant that this manual will be uninterrupted or error-free. We reserve the right to revise or
remove any content in this manual at any time.
FEATURES
1. 1/2.5” CMOS Sensor with up to 5MP video output
2. Low light sensitivity of 0.1 Lux / F1.8, 0Lux (IR LED ON)
3. Quadbrid video output with TVI, CVI, AHD & CVBS
4. DWDR to increase image recognizability in overexposure and dark areas
5. Day and night 24-hour surveillance with IR effective distance up to 50 meters
6. IP66 for weather-proof application
7. Camera parameters adjustable when used with HD CCTV DVR
PACKAGE CONTENT
IR dome camera User manual Wrench Screws & wall plugs
DIMENSIONS*
*Dimensional Tolerance: ± 5mm
SPECIFICATIONS*
Video Mode TVI, CVI, AHD & CVBS switchable
Pick-up Element 1/2.5 " CMOS image sensor
Number of Pixels 2560 (H) x 1920 (V)
Video Frame Rate 5MP@ 20fps
Min. Illumination 0.1 Lux / F1.8, 0 Lux (IR LED ON)
S/N Ratio More than 48dB (AGC OFF)
Shutter Speed AUTO : 1/25(30)sec~1/50,000sec
Lens f3.6mm / F1.8
Lens Angle 96° (Horizontal) / 50° (Vertical) / 116° (Diagonal)
IR LED 2 units
IR Effective Distance Up to 50 meters
IR Shift YES
Day & Night Mode YES
Noise Reduction YES
IRIS Mode AES
White Balance AUTO
AGC AUTO
Sharpness Adjustable
Flickerless 50HZ / 60HZ / OFF
BLC Adjustable
DWDR YES
IP Rating IP66
Operating Temperature -20℃~ 40℃
Operating Humidity 90% or less relative humidity
Power Source (±10%) DC12V / 0.5A
Current Consumption (±10%) 100mA (IR lED OFF); 240mA (IR LED ON)
Net Weight (kg) 0.32
Optional Peripherals Junction Box (AVA456-BKT / AVA456-HBKT)
* The specifications are subject to change without notice.
INSTALLATION
Step1: Disassemble the camera case into three parts as illustrated in Figure 1.
Part 1 Part 2Base
Figure 1
Step2: Locate where you want to install this camera (wall or ceiling), and drill holes on the wall or ceiling for
securing the bracket and routing the cables (if necessary).
Step3: Attach the bracket to the wall (or ceiling), and make sure the cables are routed and arranged
properly in the bracket, as shown in Figure 2.
Step 4: Secure the bracket to the wall (or ceiling), as shown in Figure 3.
Figure 2 Figure 3
Step 5: Slightly adjust the camera lens to where it’s supposed to face, and replace Part 1 and Part 2 back,
as shown in Figure 4 and Figure 5.
Note: Do not install the lens opposite down. (Refer to
Figure 6
).
Upside
Downside
Figure 4 Figure 5 Figure 6
Step6: Power on the camera and fine-tune the viewing angle.
Step7: Adjust the position and the viewing angle of the camera, if necessary.
CONNECTION
1. DC12V Input Terminal
Connect the power terminal of the camera to a DC 12V regulated power supply.
Note: Please use the correct power adaptor, DC12V (regulated), to operate this unit. The power tolerance of
this unit is DC12V ± 10%. Over maximum DC 12V power input will damage this unit.
2. Video Output Connector (VIDEO OUT)
Connect the camera video output to the video input of a DVR with 75Ωcoaxial cable.
Note: To ensure the camera has sufficient protection against moisture, an extra waterproof measure, such
as by using an insulating tape, must be used to cover the power and video connectors after
connection.
CAMERA PARAMETERS
This camera series has its own configuration menu.
Note: The access path is taking our HD CCTV recorder as an example. If you’re using other brand’s recorder,
please refer to its own user manual to know how to access the camera parameters.
Based on the recorder type you have, on the live view:
Type 1
Click twice on the channel that this camera is connected to show in full screen, and click on on the
right side to display the PTZ control panel.
Then, click on (Enter) on the PTZ control panel to show the configuration menu of this camera, and
use the arrow keypad to choose between each option.
W
hen the camera menu is entered, use keypad to move between and
change those configurations.
▲▼ Move between selections.
◄► Change settings.
Call the camera parameters menu or enter the
currently-selected item.
Type 2
Click twice on the channel that this camera is connected to show in full screen, and click on the
bottom left of the channel to show the PTZ control panel.
Then, click on (Enter) on the PTZ control panel to show the configuration menu of this camera, and
use the arrow keypad to choose between each option.
/ Move among sub-menus.
/ Change settings.
Call the camera parameters menu or enter the currently-selected item.
MENU REMARK
MAIN-MENU AE BRIGHTNESS 1 ~ 10
EXPOSURE MODE GLOBAL
AWB MODE ATW
MWB Manually adjust the white balance
parameters by modifying R / B gain
parameters.
DAY - NIGHT MODE EXT Use the external light sensor we
added in the camera to detect the
surrounding light condition and
switch to color or B/W mode.
AUTO
COLOR
BW
VIDEO ENHANCE CONTRAST 1 ~ 10
SHARPNESS 1 ~ 10
COLOR GAIN 1 ~ 10
DNR 1 ~ 10
MIRROR DEFAULT
H Horizontal
V Vertical
HV Horizontal & vertical
D-WDR OFF / ON
VIDEO OUTPUT HD TVI / CVI / AHD / CVBS
VIDEO STANDARD Choose the video resolution and
IPS of this camera in different
video output mode.
REBOOT&APPLY
LANGUAGE ENGLISH / SIMPLIFIED
CHINESE / TRADITIONAL
CHINESE / RUSSIAN /
ITALIAN / PORTUGUESE
RESET
SAVE-EXIT Save the changes and exit the
menu.
EXIT Exit the menu without saving
Indice
Altri manuali Avtech Telecamera di sicurezza
Avtech
Avtech DGC5446SE Manuale utente
Avtech
Avtech AVK584ZN Manuale utente
Avtech
Avtech DG104 Istruzioni operative
Avtech
Avtech KPC-148E Manuale utente
Avtech
Avtech AVN806 Series Manuale utente
Avtech
Avtech AVN222 Manuale utente
Avtech
Avtech Ezum DGC1306 Manuale utente
Avtech
Avtech AVT2406 Manuale utente
Avtech
Avtech AVZ592 Manuale utente
Avtech
Avtech AVC307R Manuale utente
Avtech
Avtech AVM359a Manuale utente
Avtech
Avtech KPC132 Manuale utente
Avtech
Avtech Push Video AVN701 Manuale utente
Avtech
Avtech dg205b Manuale utente
Avtech
Avtech AVN420 Manuale utente
Avtech
Avtech AVI321 Manuale utente
Avtech
Avtech AVM503 Manuale utente
Avtech
Avtech AVM2200T Manuale utente
Avtech
Avtech DGC5105T Manuale utente
Avtech
Avtech AVN806 Series Manuale
