Award TL-EMBSBC 795 Manuale utente

TL-EMBSBC 795
TL-EMBSBC 795TL-EMBSBC 795
TL-EMBSBC 795
VIA Eden/C3 CPU
VIA Apollo PN133T 5.25-inch SBC
USER’S MANUAL
USER’S MANUALUSER’S MANUAL
USER’S MANUAL
Version 1.0

ii TL-EMBSBC 795 User’s Manual
Acknowledgments
Award is a registered trademark of Award Software International,
Inc.
PS/2 is a trademark of International Business Machines
Corporation.
Microsoft Windows is a registered trademark of Microsoft
Corporation.
Winbond is a registered trademark of Winbond Electronics
Corporation.
All other product names or trademarks are properties of their
respective owners.

TL-EMBSBC 795 User’s Manual iii
Table of Contents
Introduction.............................................................. 1
Product Description.............................................................1
Checklist..............................................................................2
Specifications ......................................................................3
Board Dimensions ...............................................................4
Installations.............................................................. 5
Installing the Memory (DIMM) ..........................................6
Setting the Jumpers..............................................................7
Connectors on TL-EMBSBC 795......................................12
Watchdog Timer Configuration.........................................24
BIOS Setup............................................................. 25
Drivers Installation................................................ 47
VIA 4 in 1 Drivers Installation..........................................48
VGA Drivers Installation...................................................53
LAN Drivers Installation...................................................56
Audio Drivers Installation .................................................59
Appendix................................................................ 61
A. I/O Port Address Map...................................................61
B. Interrupt Request Lines (IRQ) ......................................62
C. STN Flat Panel Data Outputs........................................63
D. TFT Flat Panel Data Outputs........................................64

iv TL-EMBSBC 795 User’s Manual
This page was intentionally left blank.

INTRODUCTION
TL-EMBSBC 795 User’s Manual 1
Introduction
Product Description
TL-EMBSBC 795 is a high-performance flexible embedded board
based on the VIA ProSavage TwisterT (PN133T) chipset. The chipset
is based on an innovative and scaleable architecture with proven
reliability. It is a two-chip set consisting of the VT8606 North Bridge
Controller and VT82C686B South Bridge Controller.
TL-EMBSBC 795 supports the VIA Eden/C3 processors that features
Native x86 execution, Integrated full-speed 192KB L1/L2 cache,
100/133MHz Front Side Bus, Advanced multimedia instruction set,
and MMX™ & 3DNow!™
The VT8606 integrated graphics accelerator supports 8/16/32MB frame
buffer using the system memory, integrated 2-channel 110MHz LVDS
interface and digital port for NTSC/PAL TV encoder. One or two
Ethernets can be supported by the Realtek 8139C single chip Ethernet
controller. Additional key features include support for two USB ports,
AC-97 link for audio, hardware monitoring, and power management.
The VT8606 integrated graphics accelerator supports 8/16/32MB
frame buffer using the system memory, integrated 2-channel 110MHz
LVDS interface and digital port for NTSC/PAL TV encoder. One or
two Ethernets can be supported by the Realtek 8139C single chip
Ethernet controller. Additional key features include support for two
USB ports, AC-97 link for audio, hardware monitoring, and power
management.
System memory is provided by one 168-pin DIMM socket that
accommodates SDRAM with a maximum capacity of 512MB. The
Award BIOS facilitates easy system configuration and peripheral setup.
Other advanced features include DiskOnChip flash disk support, 16-
level watchdog timer, and IrDA interface.
DiskOnChip flash disks are storage devices that has no moving parts
and emulates FDD/HDD with Flash/RAM/ROM offering reliable
data/program storage and long life span. They are reliable and suitable
for industrial or other harsh environments characterized by motion,
shock, vibration, adverse temperature, dust and humidity. Other
features include faster data access, longer MTBF, lower power
consumption, cost effective for small capacity and small form factor.

INTRODUCTION
2 TL-EMBSBC 795 User’s Manual
Checklist
Your TL-EMBSBC 795 package should include the items listed below.
•
••
•The TL-EMBSBC 795 Industrial CPU Card
•
••
•This User’s Manual
•
••
•1 CD containing chipset drivers and flash memory utility
•
••
•Cables included such as:
•
••
•1 FDD Ribbon Cable
•
••
•1 Audio Cable
•
••
•2 IDE Ribbon Cables (40-pin & 44-pin)
•
••
•1 COM Port Cable
•
••
•1 Printer Port Cable
•
••
•1 PS/2 Keyboard/Mouse Cable
•
••
•1 VGA Cable
•
••
•IBLD cable bracket for dual Ethernet

INTRODUCTION
TL-EMBSBC 795 User’s Manual 3
Specifications
Processor
Supported VIA Eden or C3 processors on board
100/133MHz Front Side Bus
Chipset VIA Apollo PN133T Chipset
North bridge: VT8606 (552-pin BGA package)
South bridge: VT82C686B (352-pin BGA package)
BIOS Award BIOS
Supports ACPI, DMI, PnP
System Memory 1x DIMM socket supports up to 512MB capacity
PC100/PC133 supported
I/O Chipset VT82C686B chipset
Keyboard controller built-in
I/O Features 1x FDD (up to 2.88MB, 3 Mode, LS120)
2x Parallel Port (EPP, ECP Port)
4x Serial Ports (3x RS232 and 1x RS232/422/485)
1x IrDA TX/RX Headers
Bus Master IDE 2x IDE interfaces for up to 4 devices; supports PIO Mode
3/4 or UDMA/33/66/100 HDD, and ATAPI CD-ROM
VGA VT8606 integrated graphics controller
8/16/32MB frame buffer with system memory
Integrated 2-channel 110MHz LVDS interface
Digital port for TV encoder
LCD Interface Supports 36 bit TTL LCD interface and 2 channel LVDS
TV Out
(Optional) VIA VT1621 TV Encoder
Composite and S-Video output
Audio VT82C686B chipset built-in sound controller
With AC97 Codec
LAN One or two Realtek RTL8139C Ethernet controllers
10Base-T / 100Base-TX protocol
USB 2 ports (pin header)
Watchdog Timer 16 levels (0, 2, 4, 6, … 30 sec.)
Hardware
Monitoring Built-in VT82C686B chipset
Monitors CPU/system temperature and voltages
DiskOnChip Support M-Systems 2MB~288MB DiskOnChip flash disk
Digital I/O 4 in, 4 out
Expansion Slot One 32-bit PCI slot
One PC/104 expansion slot
Power
Consumption +5V: 8A max. +12V: 750mA max.
Form Factor 5.25-inch SBC (Little Board)
Dimensions 203mm x 146mm (7.99” x 5.75”)

INTRODUCTION
4 TL-EMBSBC 795 User’s Manual
Board Dimensions

INSTALLATIONS
TL-EMBSBC 795 User’s Manual 5
Installations
This section provides information on how to use the jumpers and
connectors on the TL-EMBSBC 795 in order to set up a workable
system. The topics covered are:
Installing the Memory (DIMM) ..........................................6
Setting the Jumpers..............................................................7
Connectors on TL-EMBSBC 795......................................12

INSTALLATIONS
6 TL-EMBSBC 795 User’s Manual
Installing the Memory (DIMM)
The TL-EMBSBC 795 CPU Card supports one 168-pin DIMM socket
for a maximum total memory of 512MB in SDRAM type. The memory
module capacities supported are 64MB, 128MB, 256MB, and 512MB.
Installing and Removing DIMMs
To install the DIMM, locate the memory slot on the CPU card and
perform the following steps:
1. Hold the DIMM so that the two keys of the DIMM align with those
on the memory slot.
2. Gently push the DIMM in an upright position until the clips of the
slot close to hold the DIMM in place when the DIMM touches the
bottom of the slot.
3. To remove the DIMM, press the clips with both hands.
Top View of DIMM Socket
DIMM Lock
Lock
Lock Lock
Indice
Altri manuali Award Hardware per computer
Manuali Hardware per computer popolari di altre marche

EMC2
EMC2 VNX Series Manuale del proprietario

Panasonic
Panasonic DV0PM20105 Manuale utente

Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Manuale utente

Gigabyte
Gigabyte B660M DS3H AX DDR4 Manuale utente

Raidon
Raidon iT2300 Manuale utente

National Instruments
National Instruments PXI-8186 Manuale utente

















