AXCEZE AX-M300 Manuale utente
Single Door Magnetic Lock
Specification
AX-M300
Diagram
Cautions:
AX-M300
Model
AX-M300 170Lx41.4Wx20.5H
A. The screw of armature plate should not be fixed too tight. Proper elasticity should be guaranteed for the rubber ring so that the
armature plate can adjust itself to the appropriate position.
B. Check the jumpers position befare connecting. Figure out it represents 12VDC or24VDC.
12/24VDC 12V/300mA
24V/150mA 18Okg(350Lbs) No Single Door
Size(unit:mm) Voltage Current Holding Force Signal Output Door
Bracket Installation Different brackets are available according to different types of doors.
For example, narrow door, frameless glass door and inward opening door.
AX-M300
AX-M300
Installation instruction
Circuit Board Diagram Different brackets are available according to different types of doors.
For example, narrow door, frameless glass door and inward opening door.
AX-M300
AX-M300
Wire Connection
Notes:
Please read specification before installing magnetic lock
A. Handle the equipment carefully. The holding force can be reduced by damaging the lock body
or armature plate.
B. The magnetic loe k should be fixed tightly on the door trame and the arma tu re plate on the door
leaf. Kit provided allows the armature plate to pivot its center, thus compensating misalignment
ca u sed by other factors.
C. Template can only be u sed with the door in normally closed ci rcumstance.
D. Please fix screws of magnetic lock firmly.
E. Detect signal of door state: the limit of reed switch and dry contact is 0.5A/30VDC. Don't overload.
Indice
Altri manuali AXCEZE Serratura della porta
