AXIOMTEK P6191 Manuale utente

P6191

19” SXGA TFT Monitor

User’s Manual

Disclaimers

This manual has been carefully checked and believed to contain accurate information.

Axiomtek Co., Ltd. assumes no responsibility for any infringements of patents or any third

party’s rights, and any liability arising from such use.

Axiomtek does not warrant or assume any legal liability or responsibility for the accuracy,

completeness or usefulness of any information in this document. Axiomtek does not make any

commitment to update the information in this manual.

Axiomtek reserves the right to change or revise this document and/or product at any time

without notice.

No part of this document may be reproduced, stored in a retrieval system, or transmitted, in

any form or by any means, electronic, mechanical, photocopying, recording, or otherwise,

without the prior written permission of Axiomtek Co., Ltd.

CAUTION

If you replace wrong batteries, it causes the danger of explosion. It is recommended by the

manufacturer that you follow the manufacturer’s instructions to only replace the same or

equivalent type of battery, and dispose of used ones.

March 2017, Version A1

Printed in Taiwan

iii

Safety Precautions

Before getting started, read the following important cautions.

1. Be sure to ground yourself to prevent static charge when installing the internal

components. Use a grounding wrist strap and place all electronic components in any

static-shielded devices. Most electronic components are sensitive to static electrical

charge.

2. Disconnect the power cords from the P6191 Series before making any installation. Be

sure both the system and the external devices are turned OFF. Sudden surge of power

could ruin sensitive components. Make sure the P6191 Series is properly grounded.

3. Do not open the system’s top cover. If opening the cover for maintenance is a must, only

a trained technician is allowed to do so. Integrated circuits on computer boards are

sensitive to static electricity. To avoid damaging chips from electrostatic discharge,

observe the following precautions:

Before handling a board or integrated circuit, touch an unpainted portion of the

system unit chassis for a few seconds. This will help to discharge any static

electricity on your body.

When handling boards and components, wear a wrist-grounding strap, available

from most electronic component stores.

Trademarks Acknowledgments

Axiomtek is a trademark of Axiomtek Co., Ltd.

Windows®is a trademark of Microsoft Corporation.

IBM, PC/AT, PS/2, VGA are trademarks of International Business Machines Corporation.

Intel®and Pentium®are trademarks of Intel Corporation.

AMI is trademark of American Megatrend Inc.

Other brand names and trademarks are the properties and registered brands of their

respective owners.

Table of Contents

Disclaimers.....................................................................................................ii

Safety Precautions........................................................................................iii

Chapter 1 Introduction............................................. 1

1.1 General Description............................................................................1

1.2 Features...............................................................................................2

1.3 Specifications......................................................................................2

1.4 Dimensions and Outlines ...................................................................3

1.5 I/O Outlets............................................................................................4

1.6 Packing List.........................................................................................5

Chapter 2 System Setup .......................................... 7

2.1 System Configuration.........................................................................7

2.2 Panel Mounting ...................................................................................8

2.3 Wall Mounting......................................................................................8

2.4 VESA Mounting ...................................................................................9

2.5System Jumper Setting ....................................................................10

Appendix A Supported Input Timing Modes ............. 11

Appendix B OSD Operation........................................ 13

Function Description of OSD Menu............................................................13

P6191 User’s Manual

Introduction 1

Chapter 1

Introduction

This chapter contains general information and detailed specifications of the P6191. Chapter 1

includes the following sections:

General Description

Features

Specifications

Dimensions and Outlines

I/O Outlets

Package List

1.1 General Description

The P6191, an industrial 19 inches view area LCD Monitor comes with slim, light and reliable

features to replace traditional bulky CRT for Industrial application. Its unique flat design is fit for

panel mounting, VESA mounts and Wall mounting. The display interface offers DVI-D, HDMI

and VGA for different input source from PC system or multimedia system that let you upgrade

the display don’t change anything from your system. Besides, for varied HMI field, you can

choose one of resistive touch or glass interface to meet your application. In addition, this

monitor has more comfort, safety, and environmental protection for humanized & health

consideration those would be the benefit that users can get.

This LCD monitor builds in color active matrix thin-film-transistor (TFT) liquid crystal display to

provide superior display performance. A maximum resolution of 1280x1024 is ideal for

displaying complex graphics and high definition images. Other outstanding designs that

enhance this LCD monitor’s performance are Plug & Play compatibility, and OSD (On Screen

Display) controls, especially OSD, it made you ease adjustment on screen image.

P6191 User’s Manual

2 Introduction

1.2 Features

High contrast color 19”SXGA TFT LCD display support resolution up to 1280x1024

Flat design with NEMA4/IP65-compliant

Suits with resistive touch or glass

High Brightness and Ultra-wide viewing angle with anti-glare features.

Power management system conforms to VESA DPMS standard

Advanced OSD control for picture quality adjustment

Supports VESA ARMs, Desktop Stand Rear, Panel and Wall mounting

1.3 Specifications

19” SXGA(1280x1024) LCD with LED backlight

Resistive Touch or glass

Front bezel design with NEMA4/IP65

Control: OSD (On Screen Display) control pad on the side

Mounting: Support Panel mount, VESA arm mount and Wall mount (optional)

Net Weight

P6191P: 5.72KG

P6191O:4.28KG

Dimension (Main Body Size)

P6191O: 404.5x 332x 52.9 mm

P6191P: 437.4x 343x 58 mm

Operation Temperature

0℃to 50℃

Relative Humidity

20% to 90% @ 40℃, Non-Condensing

Power input

Screw-type external AC or 12V/24VDC-in

Max power consumption: 17W

NOTE: All specifications and images are subject to change without notice.

P6191 User’s Manual

Introduction 3

1.4 Dimensions and Outlines

The following diagrams show the dimensions and outlines of P6191

P6191P:

P6191O:

P6191 User’s Manual

4 Introduction

1.5 I/O Outlets

Please refer to the following illustration for I/O locations of the P6191.

Function

Menu (Enter function)

Screw type or

Phoenix type power input

SEL+

HDMI

SEL-

DVI-D

Exit/Auto Adjust

VGA

Power LED

Audio

Power Switch

RS-232 or USB for Touch

12 11 10 9 8 7

P6191 User’s Manual

Introduction 5

1.6 Packing List

When you receive the P6191, the bundled package should contain the following items:

P6191 unit x 1

VGA cable x1

USB cable or RS-232 cable x1 (for resisitve touch version only )

Adaptor x1 (for AC version only)

Panel mount kit x 16 (optional)

HDMI cable x1 (optional)

DVI cable x1 (optional)

Wall mount bracket x1 (optional)

If you can not find the package or any items are missing, please contact Axiomtek distributors

immediately.

P6191 User’s Manual

6 Introduction

This page is intentionally left blank.

Indice

Altri manuali AXIOMTEK Monitor

AXIOMTEK

AXIOMTEK SDM510L Manuale utente

AXIOMTEK

AXIOMTEK P6121-V3 Manuale utente

AXIOMTEK

AXIOMTEK P6171-V3 Manuale utente

AXIOMTEK

AXIOMTEK P6217W-V3 Manuale utente

AXIOMTEK

AXIOMTEK P6187W Manuale utente

AXIOMTEK

AXIOMTEK P6157 Manuale utente

AXIOMTEK

AXIOMTEK P6105 Manuale utente

AXIOMTEK

AXIOMTEK P6191-V3 Manuale utente

AXIOMTEK

AXIOMTEK GOT3187W-881-PCT Manuale utente

AXIOMTEK

AXIOMTEK PANEL6100 Manuale utente

AXIOMTEK

AXIOMTEK P6125 Manuale utente

AXIOMTEK

AXIOMTEK P6151 Manuale utente

AXIOMTEK

AXIOMTEK MMT175 Manuale utente

AXIOMTEK

AXIOMTEK P6151-V3 Manuale utente

AXIOMTEK

AXIOMTEK P712 Manuale utente

AXIOMTEK

AXIOMTEK P6157W-V3 Manuale utente

AXIOMTEK

AXIOMTEK P6157W-V2 Manuale utente

AXIOMTEK

AXIOMTEK DK1211C Manuale utente

AXIOMTEK

AXIOMTEK P718O Manuale utente

AXIOMTEK

AXIOMTEK P6187W-V3 Manuale utente

AXIOMTEK

AXIOMTEK P6187W V2 Series Manuale utente

AXIOMTEK

AXIOMTEK P624-C Manuale utente

AXIOMTEK

AXIOMTEK PANEL 6152-O/P Manuale utente

AXIOMTEK

AXIOMTEK P6103W-V3 Manuale utente

Manuali Monitor popolari di altre marche

Linear Acoustic

Linear Acoustic LQ-1000 Manuale utente

AOC

AOC I2579V Manuale utente

Gateway

Gateway FPD1520 Manuale utente

Furuno

Furuno Mu 120c Manuale utente

Asus

Asus VB171D - 17" LCD Monitor Manuale utente

Dell

Dell S2230MX Istruzioni utente

Philips

Philips 107C64 Manuale utente

Dell

Dell S2409WFP Manuale utente

EverFocus

EverFocus EN-7517E Manuale utente

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manuale utente

Dell

Dell Precision 7680 Manuale di istruzioni

LG 50PM1M - - 50" Plasma Panel Manuale utente

Bosch

Bosch DDU 9 Manuale utente

Acer

Acer A231HL Manuale utente

Philips

Philips 86BDL4152T Manuale utente

NEC

NEC AccuSync LCD5V Manuale utente

Emay

Emay SleepO2 Manuale utente

IBM

IBM 6360 Istruzioni per l'installazione