Axis 1650 Manuale
ENGLISH
1Unpack Box
VERIFY THAT YOU HAVE ALL THE ITEMS LISTED BELOW:
•AXIS 1650
LPT1 Printer Connector
Ethernet Connector
External Power Supply
Connector Power Indicator USB Connector
Network
Indicator
•Mounting clip
•Power adapter
•AXIS 1650 CD
•AXIS 1650 Set-Up Instructions
•Network cable
•USB cable
Part no. 25080
QI GUIDE AXIS 1650 EUR R2.0
ENGLISH
2Install Canon Printer Driver
Important: Please install the printer driver according to the manual that came with your Canon de-
vice. The printer driver must be installed before continuing.
3Connect AXIS 1650
1. Make sure the Canon device is off and unplugged and that the AXIS 1650 external power supply
is disconnected.
2. Locate the serial number, found on the underside label of the AXIS 1650, and write it down. You
will need this number to configure the AXIS 1650.
3. Connect the AXIS 1650 to the Canon device. Please refer to the correct connection procedure
below for your Canon device.
Note: For Canon devices supporting both parallel and USB connections, select one of the con-
nection procedures below to connect the AXIS 1650.
Product Name
Serial Number/MAC Address
Print Server Name
ENGLISH
3Connect AXIS 1650 (contd.)
Connect the AXIS 1650 to the USB port using the USB cable.
Connect the AXIS 1650 to the printer’s parallel port, the LPT port. Secure in place by pressing
in locking clips.
4. Connect AXIS 1650 to the Ethernet connector using a network cable.
5. Turn the Canon device on and wait for ready mode.
6. Connect AXIS 1650 to the external power supply connector using the power adapter.
The power indicator will light up. When the network indicator starts to flash, the AXIS 1650 is
correctly connected to the network.
For CANON MF3110/3112, FAX-L400, MF5630/5650, MF5730/5750, PC-D320/D340 & LBP3200/1120
For CANON iR1210/1230/1270F/1510/1530/1570F, PC1210D/1230D/1270D (LBP 810/1210)
ENGLISH
4Mount Print Server USB only
Important: Do not drill into the Canon device; the provided wall screw is an optional wall mount. It
is recommended that you do not leave the AXIS 1650 hanging from the Canon device, please affix to
the Canon device.
The mounting clip comes with 3 parts:
• Transparent plastic holder
• Transparent plastic clip
• Wall screw
1. Peel off adhesive tapes and fasten AXIS 1650 to the plastic holder. It is recommended that the
holder be affixed to the AXIS logo side of the AXIS 1650.
2. Peel off adhesive tape and fasten plastic clip to the Canon device.
It is recommended that the clip be affixed to the back side, upper right corner of the unit.
Wall Screw
Holder
Clip
For CANON MF3110/3112, MF5630/MF5650 & MF5730/MF5750
ENGLISH
4Mount Print Server USB only (contd.)
It is recommended that the clip be affixed to the left side, lower back corner of the unit.
For CANON FAX-L400 & PC-D320/D340
ENGLISH
5Assign IP Address
INSTALL AXIS IP JUMPSTARTER
1. Insert AXIS 1650 CD into CD drive.
2. An AXIS 1650 window will pop up. If
auto-run is off, click on My Computer
and click on the AXIS 1650 CD and select
[Open].
3. Click the blue Software link on the upper
right.
4. Click the blue AXIS IP JumpStarter link
to install.
5. A File Download window will appear,
select Run this program from its cur-
rent location radio-button and click
[OK].
ENGLISH
5Assign IP Address (contd.)
6. IP JumpStarter Setup will appear, click
[Next].
7. To install in the default destination
folder, click [Next], otherwise select
another destination folder and continue.
8. A system requirement diagnostic will run
to ensure needs are sufficient, click
[Next].
9. IP JumpStarter will install, once com-
pleted be sure to check the action Create
a shortcut to AXIS IP JumpStarter on
your desktop. Click [Next], then [Finish].
10. Open IP JumpStarter. Select the AXIS
1650 from the serial number list. All
AXIS1650 appear with the default IP
address 192.168.0.90. If you are install-
ing several AXIS 1650, check the serial
number to locate a specific AXIS 1650.
11. Select Server | Set IP Address and the
Set IP Address window appears.
12. Click the radio button that corresponds
to your choice of IP setting method
(static or dynamic using DHCP). When
assigning a static IP address you also
have to define the Subnet Mask and
Default Gateway.
13. Click [OK] to save your settings.
14. You may be prompted to enter the server
root password (by default set to
<blank>), click [OK] and the AXIS 1650
will appear in the list with the assigned
IP address.
15. To verify that you have access to the
AXIS 1650’s Web pages, highlight the
AXIS 1650 in the list and select Server |
Server Home Page.
ENGLISH
6Install AXIS CAPT Print Monitor
1. Insert AXIS 1650 CD into CD drive.
2. An AXIS 1650 window will pop up. If
auto-run is off, click on My Computer
and click on the AXIS 1650 CD and select
[Open].
3. Click the Software link on the upper
right.
4. Click the AXIS CAPT Print Monitor link
to install.
5. A File Download window will appear,
select Run this program from its cur-
rent location and click [OK]
Note: Prior to installing AXIS CAPT Print Monitor 2.0, please uninstall any previous versions of
AXIS CAPT Print Monitor that may be on your operating system.
Note: CANON FAX-L400 can utilize Standard TCP/IP port in case of Windows 2000/XP/Server
2003. Refer to the manual of the server regarding the installation.
ENGLISH
6Install AXIS CAPT Print Monitor (contd.)
6 CAPT Print Monitor will download. Once
complete, click [Open]. If the dialog box
closes, locate the destination folder that
CAPT Printer Monitor saved to and open.
7. InstallShield Wizard will begin the CAPT
Print Monitor Setup program. Click
[Next].
8. Review the license agreement. If you
agree and accept the terms, click [Yes].
9. For Windows XP/Server 2003: Make sure
the Allow this application to process
incoming network printer information
on the local subnet checkbox is checked.
10. Leave the Use the Unicast Communi-
cate Mode box unchecked and click
[Next].
11. To start copying files, click [Next].
12. CAPT Print Monitor will be installed, once
completed click [Finish].
ENGLISH
7Set-up Port in Windows 2000/XP/2003
1. Go to Start | Settings | Printers. (For
Windows XP/2003, go to Start | Settings
| Printers and Faxes.) Select the Canon
device and right click and select Proper-
ties. Select the Ports tab. Select [Add
Port].
2. Select AXIS CAPT Port and click [New
Port].
3. If the IP address you assigned to AXIS
1650 is not on the list, enter the IP
address. Click [Add] and [OK]. If listed,
select the IP address and click [OK].
4. Click [Close] to close the Printer Ports
window. Click [Apply] to register the
port.
5. Go to General tab and click [Print Test
Page] to print a test page.
Altri manuali per 1650
4
Indice
Altri manuali Axis Server di stampa
Axis
Axis 27981R1 Manuale utente
Axis
Axis NPS 550 Manuale utente
Axis
Axis NPS 530 Manuale utente
Axis
Axis NPS 650 Manuale utente
Axis
Axis 5800 Manuale utente
Axis
Axis OfficeBasic USB Wireless Manuale utente
Axis
Axis 5400+ Manuale utente
Axis
Axis 540 series Manuale utente
Axis
Axis 540 series Manuale utente
Axis
Axis Print Server 5470e Manuale utente
Axis
Axis 1620 Manuale utente
Axis
Axis 5800 Manuale utente
Axis
Axis 140 BJC Manuale utente
Axis
Axis 540 series Manuale utente
Axis
Axis Print Server 5470e Manuale utente
Axis
Axis 27978R1 Manuale utente
Axis
Axis Print Server 5470e Manuale utente
Axis
Axis NPS 550 Manuale utente
Axis
Axis 540 series Manuale utente
Axis
Axis 5600+ Manuale utente
