Axis 1650 Manuale utente
1
AXIS 1650 User’s Manual
AXIS 1650 User’s Manual
The Network Print Server for Canon Printers and
Multifunctional Products
* Including support for the host-based printing methods
Canon Advanced Printing Technology
Canon Advanced Raster Printing System
and other printer types such as Canon BubbleJet
Safety Notices AXIS 1650 User’s Manual
2
Safety Notices
Take some time to read through the safety notices before installing the print server. Please observe all safety markings and
instructions when using this product.
Important:
Observe “Important:” in the text to avoid operational impairment. Do not proceed until you have fully understood the implications.
Electromagnetic Compatibility (EMC)
USA
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
- reorient or relocate the receiving antenna
- increase the separation between the equipment and receiver
- connect the equipment into an outlet on a circuit different from that to which the receiver is connected
- consult the dealer or an experienced radio/TV technician for help. Shielded (STP) network cables must be used with this unit to
ensure compliance with the class B limits..
Europe
This digital equipment fulfils the requirements for radiated emission according to limit B of EN55022, and the requirements for
immunity according to EN55024 residential, commercial, and light industry. Compliance is not valid for unshielded network cables.
Japan
This is a class B product based on the standard of the Voluntary Control Council for Interference from Information Technology
Equipment (VCCI). If this is used near a radio or television receiver in a domestic environment, it may cause radio interference.
Install and use the equipment according to the instruction manual. Compliance is not valid for unshielded network cables.
Australia
This electronic device meets the requirements of the Radio communications (Electromagnetic Compatibility) Standard 1998 AS/NZS
3548. Compliance is not valid for unshielded network cables.
3
AXIS 1650 User’s Manual Safety Notices
Liability
Every care has been taken in the preparation of this manual; if you detect any inaccuracies or omissions, please inform your local
Axis office, which can be found on the cover of this document. Axis Communications AB cannot be held responsible for any
technical or typographical errors and reserves the right to make changes to the product and manuals without prior notice. Axis
Communications AB makes no warranty of any kind with regard to the material contained within this document, including, but not
limited to, the implied warranties of merchantability and fitness for a particular purpose. Axis Communications AB shall not be
liable nor responsible for incidental or consequential damages in connection with the furnishing, performance or use of this
material.
Axis’ Trademarks
AXIS IP JumpStarter, AXIS CAPT Print Monitor.
Other Trademark Acknowledgments
Adobe Acrobat Reader, Canon, Ethernet, Internet Explorer, Microsoft, NetScape, NetSpot Device Installer (NSDI), Windows, are
registered trademarks of the respective holders.
Patent information
Axis AB has intellectual property rights relating to technology embodied in the product that is described in this document. In
particular, and without limitation, these intellectual property rights may include one or more of the patents listed at
http://www.axis.com/patent.htm and one or more additional patents or pending patent applications in the US and other countries.
AXIS 1650 User’s Manual
Revision 1.01
Part No: 22415
Date: August 2004
Copyright © Axis Communications AB, 2004
AXIS 1650 User’s Manual
4
Table of Contents
About this Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
About Axis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Support Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Section 1 Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Section 2 Print Server Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
1. Connect the Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
2. Set the IP Address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Set an IP Address with NetSpot Device Installer software . . . . . . . . . . . 18
IP Address Host Names . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Section 3 Windows Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Installing Printer Ports using AXIS CAPT Print Monitor . . . . . . . . . . . . . 22
Using AXIS CAPT Print Monitor in Windows 2000, XP and Server 2003 23
Using AXIS CAPT Print Monitor in Windows 98 and Me . . . . . . . . . . . . 29
Using the Standard TCP/IP Port in Windows 2000/XP/2003 . . . . . . . . . 32
Section 4 Print Server Management and Configuration . . . . . . . . . . . . . . . . . . . . . . . . . 35
Configuration Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Print Server Management from the Embedded Web Pages . . . . . . . . . . 36
Accessing the Embedded Web Pages . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Available Services from the User Mode . . . . . . . . . . . . . . . . . . . . . . . . . 38
Available Services from the Admin Mode . . . . . . . . . . . . . . . . . . . . . . . 40
Print Server Management Using FTP . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Print Server Management Using SNMP . . . . . . . . . . . . . . . . . . . . . . . . . 53
Section 5 The Test Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Section 6 Upgrading the Firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Appendix A Enabling Unicast Network Communication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Appendix B Internet Connection Firewall in Windows XP SP2 . . . . . . . . . . . . . . . . . . . . . . . . 62
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
5
AXIS 1650 User’s Manual
Preface
Thank you for purchasing the AXIS 1650. This product has been developed to connect your
printer anywhere in your network, allowing all network users access to shared printer resources.
About this Manual
This manual is applicable for the AXIS 1650 print server with firmware version 1.00 or later,
providing introductory information as well as detailed instructions on how to set up and
manage the print server in various network environments. It is intended for everyone involved in
installing and managing the print server. To fully benefit from this manual, you should be
familiar with basic networking principles.
These instructions are based on the settings in a new and unconfigured print server.To reload
the default parameters, you can perform a Factory Default, which will restore all default
settings. See The Test Button, on page 54.
About Axis
Axis increases the value of network solutions. The company is an innovative market leader in
network video and print servers. Axis' products and solutions are focused on applications such
as security surveillance, remote monitoring and document management. The products are based
on in-house developed chip technology, which is also sold to third parties.
Axis was founded in 1984 and is listed on the Stockholmsbörsen (XSSE:AXIS). Axis operates
globally with offices in 14 countries and in cooperation with distributors, system integrators
and OEM partners in 70 countries. Markets outside Sweden account for more than 95 % of
sales. Information about Axis can be found at www.axis.com
AXIS 1650 User’s Manual
6
Support Services
Should you require any technical assistance, please contact your Axis reseller. If your questions
cannot be answered immediately, your Axis reseller will forward your queries through the
appropriate channels to ensure a rapid response.
If you are connected to the Internet, you can:
• Download user documentation and firmware updates
• Find answers to previously resolved problems in the FAQ database. Search by product,
category or phrase
• Report problems to Axis support staff by logging in to your private support area
• Visit the Axis support Web: www.axis.com/techsup
7
AXIS 1650 User’s Manual Product Overview
Section 1 Product Overview
Package Contents
Hardware Model Model/ Part Number
Network Print Server
AXIS 1650 0214-001- XX
With firmware version 1.00 or higher
Adhesive Holder & Clip
ACC AXIS CLIPS K 20119
USB Cable
70 cm, 28 inches
USB cable supports USB Low-Speed and
Full-Speed. Hi-Speed is not supported.
20208
Power Adapter
Model PS-H Part No.
Australia 19111
Europe 19108
UK 19109
Japan 19110
USA (120V) 19110
USA (230V) 19108
Network cable RJ 45 Shielded CAT5 0.5M 16283
CD
AXIS 1650 CD
rev.1.0
or higher
Printed Material
AXIS 1650 Quick Installation Guide
rev.1.0
or higher
WARRANTY AXIS SERVERS 1YR 21681
Optional accessories (not
included in package) Description Part Number
Cables
Parallel Printer Cable 13360
Centronics to Mini Centronics Cable 16453
Product Overview AXIS 1650 User’s Manual
8
The AXIS 1650 Network Print Server
Supported Printers
AXIS 1650 is developed to network Canon printers and multifunctional products. AXIS 1650
supports host-based printing methods such as Canon Advanced Printing Technology, Canon
Advanced Raster Printing System and other printer types such as Canon BubbleJet.
Supported Environments
The AXIS 1650 supports printing over TCP/IP from the following clients:
• Windows 98
• Windows Me
• Windows 2000
• Windows XP
• Windows Server 2003
IMPORTANT: Printers from other manufacturers than Canon are not supported.
Test button
Network indicator
USB Printer Port (USB1)
Power indicator
Power adapter
connector
Ethernet connector
Parallel printer port (LPT1)
9
AXIS 1650 User’s Manual Product Overview
Installation and Integration
The installation of the AXIS 1650 and its integration into the network is performed using one of
these software combinations:
•AXIS IP JumpStarter (for IP setting) and then AXIS CAPT Print Monitor (for printer
installation)
•CanonNetSpot Device Installer (for IP setting) and then AXIS CAPT Print Monitor (for
printer installation)
Configuration and Management
Configuration and management of AXIS 1650 is performed using the TCP/IP protocol. The main
method is using a Standard Web browser, See “Print Server Management from the Embedded
Web Pages” on page 36.
Printing Protocol: TCP/IP
Speed
The AXIS ETRAX chip has been specifically designed for LAN products and benefits users with a
faster throughput than a direct PC-to-printer connection. With a sustained data throughput of
over 1 Mbytes per second (100baseTX) the AXIS 1650 is fast. ECP high-speed communication is
supported.
Security: You can assign a password that restricts unauthorized configuration of the AXIS 1650.
Monitoring: The AXIS 1650 embedded Web pages allow you to continuously monitor printer
status. Additionally, the AXIS 1650 supports SNMP for remote monitoring.
• AXIS IP JumpStarter and AXIS CAPT Print Monitor are available free of charge from the
AXIS 1650 CD and on www.axis.com.
• NetSpot Device Installer is available on www.canon.com
Product Overview AXIS 1650 User’s Manual
10
Future proof: You can upgrade the AXIS 1650 Flash memory over the network. This allows you
to quickly update and enhance the operational features of your AXIS 1650 when new print
server software becomes available.
Printer Ports
• One Low and -Full speed USB 1.1 port that also works with USB 2.0.
Hi-Speed is not supported.
• One high-speed IEEE 1284 compatible parallel port that plugs directly into the printer´s
parallel port.
AXIS 1650 is featured with two ports for ease of integration with most Canon printers. There is
however no support for handling two connected printers simultaneously.
Altri manuali per 1650
4
Indice
Altri manuali Axis Server di stampa
Axis
Axis 540 series Manuale utente
Axis
Axis 5400+ Manuale utente
Axis
Axis OfficeBasic USB Wireless Manuale utente
Axis
Axis 150 Manuale utente
Axis
Axis 5400+ Manuale utente
Axis
Axis Print Server 5470e Manuale utente
Axis
Axis 540 series Manuale utente
Axis
Axis AXIS 1610 Manuale utente
Axis
Axis Print Server 5470e Manuale utente
Axis
Axis NPS 530 Manuale utente
Axis
Axis 27978R1 Manuale utente
Axis
Axis 5400+ Manuale utente
Axis
Axis 1650 Manuale
Axis
Axis OfficeBasic USB Wireless Manuale utente
Axis
Axis AXIS 570 Manuale utente
Axis
Axis 540 series Manuale utente
Axis
Axis PrintPoint 1P 560/100 Manuale utente
Axis
Axis AXIS USB Manuale utente
Axis
Axis 5500 Manuale utente
Axis
Axis AXIS 560 Manuale utente
