Axis P1353 Manuale utente

Configuration guide  Mechanical PTZ configuration on the AXIS P135X cameras

Rev: 1.1, Last updated: 02/04/2013 1

Configuration guide

Mechanical PTZ configuration on

the AXIS P135X cameras

This document shows how to configure AXIS P135X cameras to control primarily

a PT head and optionally a zoom lens.

1Configuration steps

Follow the below configuration steps after connecting the PT head to RS-485/RS-422 serial port

of the camera. Connection schemes are available for particular PT head on driver support pages.

General pin assignment is as follows:

Function

Pin

Notes

RS-485/RS-422 Tx (A)

1 (Tx+)

Tx pair for RS422 and 4-wire

RS-485

RS-485/RS-422 Tx (B)

2 (Tx-)

RS-485A alt. RS-485/RS-422

Rx (A)

3 (Rx+/Tx+ alt Rx+).

Rx pair for all modes

(combined Rx/Tx for 2-wire

RS-485)

RS-485B alt. RS-485/RS-422

Rx (B)

4 (Rx-/Tx- alt. Rx-)

Configuration guide  Mechanical PTZ configuration on the AXIS P135X cameras

Rev: 1.1, Last updated: 02/04/2013 2

Configure the camera as shown in the steps below:

1.1 Step 1 – Select Uploadable PTZ Driver option

In one of the initial menus after configuring the camera’s password you will need to select

Uploadable PTZ driver option.

If product is already configured to use Digital PTZ option which is preselected you will need to

factory default the camera under Setup > System Options > Maintenance, selection Default and

configure the product from the beginning.

1.2 Download driver from axis.com

Select your product on the Support pages and go to PTZ driver, see connection schemes and

download the driver from there.

For availability of other drivers than those on site, contact Axis Support via Online helpdesk.

Configuration guide  Mechanical PTZ configuration on the AXIS P135X cameras

Rev: 1.1, Last updated: 02/04/2013 3

1.3 Upload the driver

Upload the PTZ driver and Activate PTZ.

1.4 Adjust COM port settings (Optional)

Adjust COM port settings if needed to agree with the settings of the device connected to

the camera:

Configuration guide  Mechanical PTZ configuration on the AXIS P135X cameras

Rev: 1.1, Last updated: 02/04/2013 4

1.5 Enable zoom (Optional)

Go to PTZ > Advanced > Controls and enable Zoom in case for example of steering a zoom

lens

Altri manuali per P1353

1

Questo manuale è adatto per i seguenti modelli

2

Indice

Manuali Telecamera di sicurezza popolari di altre marche

Okina USA

Okina USA SIR36-870VF650LP Manuale utente

Divio

Divio NDR155PA Manuale utente

Canon

Canon VB-C500D Manuale utente

Easy Access

Easy Access EasyGuard Manuale utente

Vivotek

Vivotek FD9389-EHV-v2 Manuale utente

TUYA

TUYA COSMO W2 Manuale utente

Eusso

Eusso UNC7500-IR Guida all'installazione

urmet domus

urmet domus 1096/204 Manuale utente

VC

VC VC20 series Manuale utente

ieGeek

ieGeek DD201 Manuale utente

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuale utente

Vicon

Vicon V662-D-1 Istruzioni operative

Grundig

Grundig GCH-K0274P Manuale utente

Lorex

Lorex VANTAGE LBC7032 Manuale utente

4xem

4xem WPT Manuale utente

Samsung

Samsung SCV-3082 Manuale utente

Vitek

Vitek VTC-C544 Manuale utente

Lumens

Lumens VC-A50PNW Manuale utente