Axminster SX2.7 Manuale utente
SX2.7
Mill Drill
Code 107154
Original Instructions
AT&M: 07/07/2020
BOOK VERSION: 2
Cert No: SX2.7
Axminster Tools & Machinery Ltd
Axminster Devon
EX13 5PH UK
axminster.co.uk
Type Mill Drill
Model SX2.7 and conforms to the machinery example for which the
EC Type-Examination Certificate No TA 385203412
has been issued by Shangjai SIEG Machinery CO., Ltd
at: No.555 Caoan Rd., SHANGHAI CHINA
and complies with the relevant essential health and safety requirements.
2006/42/EC
2014/30/EU
EN 55014-1:2017
EN 55014-2: 2015
declares that the machinery described:-
This machine complies with the following directives:
EU Declaration of Conformity
EN 61000-3-2: 2014
EN 61000-3-3:2013
Signed
Andrew Parkhouse
Operations Director Date: 10/04/2020
2
IMPORTANT SAFETY INSTRUCTION
READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS TOOL
Operator
COMMON SENSE AND CAUTION ARE FACTORS WHICH CANNOT BE BUILT INTO
ANY PRODUCT. THESE FACTORS MUST BE SUPPLIED BY THE OPERATOR.
PLEASE REMEMBER:
1. When using electric tools, machines or equipment, basic safety precautions should
always be followed to reduce the risk of fire, electric shock, and personal injury.
2. Keep work area clean. Cluttered areas invite injuries.
3. Consider work area conditions. Do not use machines or power tools in damp, wet, or
poorly lit locations. Do not expose equipment to rain, keep work area well lit. Do not
use tools in the presence of flamable gases or liquids.
4. Keep children away, all children should be kept away from the work area.
5. Guard against electric shock. Prevent body contact with grounded surfaces such as
pipes, radiators, ranges, and refrigerator enclosures.
6. Stay alert. Never operate if you are tired.
7. Do not operate the product if under the influence of alcohol or drugs. Read warning
labels on prescriptions to determine if your judgment or reflexes might be impaired.
8. Do not wear loose clothing or jewelry as they can be caught in moving parts.
9. Wear restrictive hair covering to contain long hair.
10.Use eye and ear protection. Always wear.
11. Keep proper footing and balance at all times.
12.Do not reach over or across running machines.
Before operations
1. Be sure the switch is OFF when not in use and before plugging in.
2. Do not attempt to use inappropriate attachments in an attempt to exceed the tool”s
capacity. Approved accessories are available from the dealer or machine maker.
3. Check for damaged parts, before using any tool, any part that appears damaged
should be carefully checked to determine that it will operate properly and perform its
intended function.
4. Check for alignment and binding of all moving parts, broken parts or mounting fixtures
and any other condition that may affect proper operation. Any part that is damaged
should be prop early repaired or replaced by a qualified technician.
5. Do not use the tool if any switch does not turn off and properly
Operation
1. Never force the tool or attachment to do the work of a larger industrial tool. It is
designed to do the job better and more safely at the rate for which it was intended.
2. Do not carry the tool by its power cord.
3. Always unplug the cord by the plug. Never yank the cord out of the wall.
4. Always turn off the machine before unplugging.
3
IF THERE IS ANY QUESTION ABOUT A CONDITION BEING SAFE OR UNSAFE,
DO NOT OPERATE THE TOOL!
Grounding Instructions
This machine has a three-prong plug, the third prong is the ground. Plug this cord
only into a three-prong receptacle. Do not attempt to defeat the protection the ground wire
provides by cutting off the round prong. Cutting off the ground will result in a safety hazard
and void the warranty.
DO NOT MODIFY THE PLUG IN ANY WAY. IF YOU HAVE ANY DOUBT, CALL A
QUALIFIED ELECTRICIAN.
Specification：
Max. drilling capacity:
20 mm
Max. tapping capacity:
12 mm
End mill capacity
16 mm
Face mill capacity
50 mm
Throat
190 mm
Max. distance spindle to table
370 mm
Spindle taper
Choice of MT#3 or R8
Spindle speed
100-2000 rpm ±10%
Table effective size
700x160 mm
T-slot size
12 mm
Table longitudinal travel (X)
400 mm
Cross travel (Y)
190 mm
Headstock travel (Z)
290 mm
Power
750 W
Overall dimension (L*W*H)
825*620*880 mm
Packing size (L*W*H)
960*760*1060 mm
Weight (Net/Gross)
111 / 145 Kg
Unpacking & Preparing for Use
Before unpacking you must check the package carefully, to find whether it is damaged
and any may have effect on the machine, please connect with the distributor in advance.
Unpacking carefully, check the species of standard accessories and the quantity to find
whether it is as same as the packing list in the package.
4
Product selection instructions:
The SX2.7 Bench mil drill have different models to choose for you, the standard model we
call it name is SX2.7, you can add digital readout display the model name is SX2.7D
(you can see have a display in front of the head-stock)。
The “D” means with “3 axis display”; use three axis magnetic grating ruler+Digital readout
display.
Model SX2.7 picture Model SX2.7D picture
The main features and advantages of this product
1, The highest speed arrange 2000 rpm; variable spindle speed;
2, Spindle speed digital readout;
3, Tapping function;
4, Brush less DC motor;
5, Chuck guard with safety switch ( optional );
6, Feeding depth digital readout;
7, Fine feeding;
8, With two USB sockets, can supply power to Lamp or IPAD;
9, Large size worktable 700*160mm;
5
FEATURE / Model SX2.7
1
Y- axis handwheel
2
Work tabel
3
Column (with protect cover)
4
Drill chuck with arbor
5
Protective guard assembly
6
Micro switch assembly
7
Depth display (spindle travel)
8
Screw for lock the spindle sleeve
9
On/Off button
10
Emergency stop switch
11
Variable speed control knob
12
Spindle speed display
13
Tapping choose button
14
Spindle box cover
15
Fine feeding handle
16
Spindle box
17
Control handle with tapping button
18
Z-axis handwheel
19
Back cover (PC Board inside)
20
Fine feeding locking knob
21
Power socket with fuse box
22
X-axis handwheel
23
Locking handle assembly
24
Base
6
Installation
CAUTION!
DO NOT ATTEMPT TO USE THE MACHINE UNTIL INSTALLTION IS CAMPLETED,
AND ALL PRELIMINARY CHECKS HAVE BEEN MADE IN ACCORDANCE WITH THIS
MANUAL.
MOUNTING THE MACHINE
The machine should be mounted on a strong, heavy workbench, of sufficient height so
that you do not need to bend your back to perform normal operations.
Ensure the location is adequately lit and that you will not be working in your own shadow.
We strongly recommend that the machine bolted firmly to strong workbench using the
tapped holes used to secure the feet to the machine. This is to provide added stability and
consequently, additional safety.
To do this, first drill four M12 clearance holes in a worktop, at the dimensions
shown in the diagram opposite, and with appropriate length M8 bolts, or screws,
with flat washers. (not supply, you need prepare these by yourself).
Application
This small mill machine is both for milling or drilling and tapping, widely used in different
places. Fine exterior, wide range of speed and easy to use.
Designed for industrial usage milling, drilling, tapping, reaming, steps and mill plane with
metal and other material.
305
210
7
Operation
1. Before starts to use this machine, operator should go through the instructions carefully
so as to acquaint with the construction of the machines, the functions of the various
controls and also the driving systems.
(1) Insert the power line insert the socket right of the
fuselage, then power on;
(2) Loosen the emergency stop switch (B), then the spindle speed display (D) bright
and show “0000”, press the start button (A) then clockwise rotation of the speed control
button (C), can make the spindle speed raise to the highest position. Under these
circumstances the mill only have forward direction. Under tapping circumstances have
forward and reverse direction. Press the tapping function lock button (E), then is button
will bright, then you can press a green button to choose the spindle run to forward or
reverse. The green button total 3 pcs, they on the right of the spindle box in the lifting
lever. You can see the word of forward or reverse on the right of the display (D), it easy to
show the user the direction of the rotation of the spindle.
Notice:
（1）In general, it is only in an emergency that a snap stop switch is needed to stop the
spindle from turning. Do not often use the emergency stop switch (B) stop the machine, it is
bad to the main PC Board.
（2）After using should turn the power switch to position ‘0’ and press the emergency
stop switch (B), then pull out the power plug from socket.
8
Several characteristic functions
1. Spindle depth display 2. Chuck guard with safety switch
3. Spindle fine feeding ( tighten the lock knob
“A” then turn the fine feeding knob “B”. 4. Two USB sockets, can supply power
5. Spindle speed readout
6. Tapping: the highest speed under ‘Tapping mode’ is 500rpm. Press the
button end of the handle the first is “forward” when press again it change
to “reverse”. Notice it have three handle all can control so it is very easy
to do.
See the picture on the right position.
Brief introduction of conventional mechanical operation （Picture for
reference only）
1. The clamping tool and work piece must stop the machine first;
2. Clean the inner hole of the spindle and the conical surface of the tool rod, push the tool
rod into the inner hole of the spindle, and put in the pull rod to hang the tool rod;
3. The parts to be processed are placed on the surface of the worktable. After pressing
with the pressing plate or use vice clamped, the parts are moved to the desired position
vertically and horizontally.
9
4. Loosen the column lock handle, shake the lift handle and move the spindle box down;
5. Start the machine, select a good rotation speed, turn counterclockwise to turn the
lifting handle, and drilling of milling can be done at this time;
6. When milling parts, we must lock the spindle box and spindle, at the same time lock
the longitudinal transverse plug iron according to the need, so as not to change the
machining size;
7. When replacing the drill chuck or milling chuck, open the top shield loosely on the
edge, loosen the screw thread of the pull rod 2-3 teeth, then use a hammer to knock the
taper handle away from the main shaft, and finally loosen the handle with the hand to
replace the rod.
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Axminster Trapano
Axminster
Axminster ATDP13B Manuale utente
Axminster
Axminster Engineer Series Manuale utente
Axminster
Axminster AC285PD Manuale utente
Axminster
Axminster Engineer Series Manuale utente
Axminster
Axminster Engineer Series Manuale utente
Axminster
Axminster AW16BMST Manuale utente
Axminster
Axminster AP340PD Manuale utente
Axminster
Axminster AHDP13B Manuale utente
Axminster
Axminster SB-25AV Manuale utente
Axminster
Axminster ZX25M Manuale utente
