AZTECH CONVERTING SYSTEMS ROLL RUNNER MH-400E Manuale utente
ROLL RUNNER
User Manual
MH-400E
AZTECH CONVERTING SYSTEMS
212 W Lodge Drive
TEMPE, AZ 85283
PHONE (480) 951-8351
FAX (480) 998-5409
www.aztechconverting.com
AZTECH CONVERTING SYSTEMS
MH-400E
USER MANUAL
TABLE OF CONTENTS
SECTION 1: GENERAL INFORMATION 1-5
SECTION 2: MACHINE SETUP 5
SECTION 3: MACHINE OPERATION 6-9
SECTION 4: MAINTENANCE AND REPAIRS 10
SECTION 5: STATION DETAILS 11-12
SECTION 6: REPLACEMENT PARTS 13
SECTION 7: WARRANTIES AND SERVICE 14
AZTECH CONVERTING SYSTEMS
MH-400E
USER MANUAL
1
Section 1: General Information
1-1: Introduction
The AZTECH RollRunner Model 400E Roll Handling Cart is designed and manufactured to help re-
duce workplace injuries by performing various material handling functions utilizing AZTECH’s inno-
vative quick-change attachment system. The RollRunner with its all-steel construction and simplis-
tic design will prove to be an invaluable product for your work environment and is sure to provide
your company many years of safe, dependable service.
The 400E series is an augmentation of the MH-400 featuring electric winch operation to further
reduce on-the-job strain.
1-2: Machine Information and Specications
Fig. 1-1: MAX LIFT HEIGHTS
MH-400EA MH-400EB MH-400EC
The MH-400 operates on a cable and winch lift system. The lift hieght is limited by the height of
the upright boom. Currently, three different lift heights are offered. They are the 400A, 400B and
400C. Their respective maximum lifts are shown in Fig. 1-1.
The 400A and the 400B have similar footprints, while the 400C is slightly larger. Their respective
sizes are shown in Figs 1-2, 1-3 & 1-4.
AZTECH CONVERTING SYSTEMS
MH-400E
USER MANUAL
2Rev 1.0
Fig. 1-2: THE MH-400A
MH-400EA
MAX LOAD: 400 LBS (181 kg)
MAX Lift Height: 38.25 (97cm)
Dimensions: 28.25 X 34 X 57.25
All dimensions are inches unless
otherwise specied
AZTECH CONVERTING SYSTEMS
MH-400E
USER MANUAL
3
MH-400EB
MAX LOAD: 400 LBS (181 kg)
MAX Lift Height: 48 (122cm)
Dimensions: 28.25 X 34 X 50.75
All dimensions are inches unless
otherwise specied
Fig. 1-3: THE MH-400B
AZTECH CONVERTING SYSTEMS
MH-400E
USER MANUAL
4Rev 1.0
MH-400EC
MAX LOAD: 400 LBS (181 kg)
MAX Lift Height: 62.00 (157cm)
Dimensions: 28.25 X 39 X 73.35
All dimensions are inches unless
otherwise specied
Fig. 1-4: THE MH-400C
AZTECH CONVERTING SYSTEMS
MH-400E
USER MANUAL
5
1-3: Care and Maintenance
The RollRunner is relatively maintenance free, generally only re-
quiring periodic inspections. Over time, you may need to replace
the lift cable, which is simply performed by removing the old ca-
ble and inserting the new cable and crimping at the open end.
1-4: Safety
The RollRunner is equipped
with a safety brake which will
automatically engage in the
event of lift cable breakage.
(see Figure 1-5)
Fig. 1-5: SAFETY BRAKE DETAIL
NEVER:
Section 2: Machine Setup
2-1: Uncrating & Inspection
After carefully removing your
RollRunner from the crate,
check to assure that all the
bolts are tight and that no
components have come loose
during shipment. Carefully
inspect all 4 wheels making
sure they roll freely and are
free of damage. If any visible
damage has occurred in ship-
ment, contact AZTECH imme-
diately.
2-2: Safety Brake Inspection
As noted in 1-4, your RollRun-
ner is equipped with a safety
brake which will prevent a load
from falling in the event of a ca-
ble break. To assure it is work-
ing properly, check to see
that the 2 springs that activate
the safety brake have tension
and are attached at both ends.
2-2 Battery Connection
The RollRunner’s motorized
lift utilizes a 12 Volt deep-cycle
battery (not provided) which
may be purchased at virtually
any automotive or department
store. To connect the battery,
simply connect red cable to
the positive (+) terminal, and
the other cable to the negative
(-) terminal. The RollRunner
comes with an auxillary battery
charger and will need to be
charged periodically dependant
on use. Generally the higher
the cold cranking amps (CCA)
the battery is rated at, the less
frequently it would need to be
charged.
2-4: Winch & Cable Inspec-
tion
Before lifting a load for the
rst time, remove the protec-
tive winch cover and visually
inspect to assure that the
cable is seated properly in the
grooves of the pulleys.
-Operate the ROLL RUNNER without the safety cover.
-Lift load over people
-Exceed the 400 LB weight limitation
-Use the ROLL RUNNER to transport people
AZTECH CONVERTING SYSTEMS
MH-400E
USER MANUAL
6Rev 1.0
Section 3: Machine Operation
RAISE
LOWER
Fig. 1-5: CRANK OPERATION
3-1: Operating Lift
To operate the motorized lift,
raise switch to “UP” position to
raise the load, and lower switch
to “DOWN” position to lower
the load (see Fig. 1-5). The
RollRunner is equipped with
upper and lower limit switches
which will automatically shut
down the machine when the
load reaches its highest and
lowest points of travel.
3-2: Rear Wheel Safety
Brakes
The RollRunner is equipped
with back wheel safety brakes
which are to be used to hold
the cart in place once in de-
sired position and as a safety
feature to keep the cart from
rolling while in the stationary
position. To operate, simply
press handle down and snap
into place to activate brake,
and lift to de-activate brake.
Fig. 1-5: SAFETY BRAKE
PRESS TO
LOCK
AZTECH CONVERTING SYSTEMS
MH-400E
USER MANUAL
7
3-3 Changing Attachments
The Rollrunner utilizes a EZ Change Attachment System which
makes it capable of performing numerous tasks. To change
attachments, simply lift attachment off the trolley and lower into
place making certain that retainer tab slides into the Slot at the
top of the trolley.
3-4: Available Attachments
Roller Core Boom: For load-
ing and unloading rolls from the
side position by supporting the
roll through the roll’s core.
360 Degree Swivel-Cradle:
Supports the roll from the bottom
and can be turned 360 degrees for
precise alignment.
AZTECH CONVERTING SYSTEMS
MH-400E
USER MANUAL
8Rev 1.0
EJECTOR CORE:
Allows the operator to manually
unload the roll without walking
around the machine.
SLIDE HANDLE FORWARD
TO UNLOAD CORE
BOOM ACESSORIES MAY BE ORDERED INDIVIDUALLY.
Please contact your AZTECH sales representative for more information.
Indice
