Aztech DSL 300P Scheda informativa del prodotto
Easy Start
(Read Me First)
Version 1.0
Protocols Discussed:
RFC 1483
RFC 1577
RFC 2364
Windows®95, 98, 98 Second Edition, Me, and Windows®2000 supported
ADSL PCI Modem
Contents
About this Easy Start2
Package2
Installation Notes2
Safety Precaution3
Step 1: Installing Your ADSL PCI Modem3
Step 2: Connecting Your ADSL PCI Modem4
Step 3: Installing Your ADSL PCI Modem Driver5
Step 4: Verifying Your ADSL PCI Modem14
Step 5: Configuring Protocol Properties
(for RFC1577 users)16
Step 6: Setting VPI/PCI Values 18
Monitoring Your ADSL Connection19
Uninstalling Your ADSL PCI Modem20
2
ADSL PCI Modem Easy StartADSL PCI Modem Easy Start
ADSL PCI Modem Easy StartADSL PCI Modem Easy Start
ADSL PCI Modem Easy Start
About this
Easy Start
This booklet contains information on setting up your ADSL
PCI Modem. It touches on the key installation procedures
to help you setup your modem.
Product warranty does not apply to damage caused by lightning, power surges or wrong voltage usage.
Please read the ReadMe.txt file on the Installation CD for any new updates
on the product.
Package
Ensure that you have the following items in your ADSL package. For any missing
items, please contact your dealer immediately.
üü
üü
ü1 ADSL PCI Modem Card
üü
üü
ü1 Telephone cable (RJ-11) (optional)
üü
üü
ü1 Micro-Filter (optional)
üü
üü
ü1 ADSL PCI Modem Easy Start
Installation Notes
The graphics and screens illustrations shown in this easy start may differ from
what you see from your system, but the steps still apply.
A Philips Screwdriver is required for the card installation.
The documentation for your computer should come in handy during the card
installation. Have it ready by your side.
It is recommended that any existing modem card be removed before installing
your new modem card.
3
ADSL PCI Modem Easy StartADSL PCI Modem Easy Start
ADSL PCI Modem Easy StartADSL PCI Modem Easy Start
ADSL PCI Modem Easy Start
Safety Precaution
Do not remove your card from its protective bag until you are ready to install it.
Always try to hold your card by its edges. Avoid touching any electronic
components on your card.
Static electricity can cause permanent damage to your card. To prevent such
a damage, touch any non-painted surface of the computers chassis before
you begin installation, and again every minute or so until the installation is
completed.
This product is for use only in UL Listed computers
To reduce the risk of fire, use only No. 26 AWG or larger telecommunication
line cord.
Step 1: Installing Your ADSL PCI Modem
After removing the cover of your computer,
locate any available PCI-Bus slot and
remove its cover plate. Save all the screws
removed.
Power off your computer and any connected devices before connecting
your modem!
ÊInsert your card firmly into the
selected PCI-Bus slot.
ËSecure the card with the mounting
screw.
Replace the cover of your computer and
secure all the screws back in place.
Ê
Mounting Screw
ADSL PCI Modem
Cover
Plate PCI-bus
Slot
Ë
4
ADSL PCI Modem Easy StartADSL PCI Modem Easy Start
ADSL PCI Modem Easy StartADSL PCI Modem Easy Start
ADSL PCI Modem Easy Start
The use of Micro-Filter eliminates noise on the telephone line and ensure best possible networked
phone performance. If your house has more than one telephone sets all sharing the same ADSL
line, than each of the telephone sets will have to be connected to a Micro-Filter. (Connect the
Micro-Filter between your Telephone Set and the telephone wall socket)
If your ADSL uses a different line and not sharing with your telephone, then a Micro-Filter will not
be necessary.
*CAUTION ! - To reduce the risk of fire, use only No. 26 AWG or larger telecommunication line cord.
Step 2: Connecting Your ADSL PCI Modem
Telephone set
Telephone
Wall Socket
Telephone
extension cord*
PHONE Jack
LINE Jack
ADSL PCI Modem
Micro-Filter
Carry out the connections as illustrated above.
1. The connection to the Telephone Set is optional. The Phone Jack
provides convenience to users who need to use the Telephone when
accessing the computer.
2. A Micro Filter (can be purchased separately from your dealer) is required
between the Phone Jack on the modem card and the Telephone Set.
5
ADSL PCI Modem Easy StartADSL PCI Modem Easy Start
ADSL PCI Modem Easy StartADSL PCI Modem Easy Start
ADSL PCI Modem Easy Start
Step 3: Installing Your ADSL PCI Modem Driver
1. The screen shots, screens information and steps illustrated in this
booklet serve only as a guide. The exact information and steps
you see on your system may vary, depending on your system
configurations. For any dissimilarities, follow closely to the
instructions as prompted on your PC screen.
2. Depending on your system configurations, you may be prompted for your
Windows CD-ROM during installation. Have it ready by your side.
This section contains the installation procedures for the following protocols. You
need to install only one of them, as determined by your Internet Service Provider
(ISP).
- RFC 1483
- RFC 1577
- RFC 2364
The following screen shots shows RFC 2364 protocol being used, unless otherwise
stated.
3.1 For Windows®95 users
i) Power on your computer to start Windows. It will detect your newly-installed
modem and prompt for its driver.
Place the Installation
CD into your CD-ROM
drive and click Next.
6
ADSL PCI Modem Easy StartADSL PCI Modem Easy Start
ADSL PCI Modem Easy StartADSL PCI Modem Easy Start
ADSL PCI Modem Easy Start
ii) Click Other Locations... to specify the driver location.
iii) For RFC 1483 or 1577 users, click Browse and navigate to the '\Win95\Lan'
folder on your CD-ROM.
For RFC 2364 users, click Browse and navigate to the '\Win95\Wan' folder
on your CD-ROM.
Click OK.
iv) Click Finish for the
driver installation to
progress.
7
ADSL PCI Modem Easy StartADSL PCI Modem Easy Start
ADSL PCI Modem Easy StartADSL PCI Modem Easy Start
ADSL PCI Modem Easy Start
At the prompt for file location,
enter '\Win95\LAN' for RFC
1483 and RFC 1577 or
'\Win95\WAN' for RFC 2364.
Click OK.
vi) Depending on your system configurations, you may be prompted for your
Windows CD-ROM for some missing files.
Replace your Installation CD with Windows CD-ROM on your CD-ROM Drive
and click OK.
v) At the following prompt, ensure that your Installation CD is in your CD-ROM
drive and click OK.
At the prompt for file location,
enter the path of your Windows
CD-ROM and click OK.
vii) If there is a Version Conflict prompt, it is recommended that you keep your
existing file. Click Ye s.
viii) At the prompt for restart, click Ye s.
You may now proceed with Step 4 to verify if your modem has been installed
successfully.
8
ADSL PCI Modem Easy StartADSL PCI Modem Easy Start
ADSL PCI Modem Easy StartADSL PCI Modem Easy Start
ADSL PCI Modem Easy Start
i) Power on your computer to start Windows. It will detect your newly-installed
modem and prompt for its driver.
ii) Click the option Search
for the best driver for
your device.
(Recommended). and
click Next.
3.2 For Windows®98 / 98 Second Edition(SE) users
Place the Installation CD
into your CD-ROM drive
and click Next.
iii) Select Specify a location
and click Browse... .
For RFC1483 and 1577
users, navigate to
W2k98Me\Lan directory
on your Installation CD.
For RFC2364 users,
navigate to
W2k98Me\Wan directory
on your Installation CD.
Click Next.
9
ADSL PCI Modem Easy StartADSL PCI Modem Easy Start
ADSL PCI Modem Easy StartADSL PCI Modem Easy Start
ADSL PCI Modem Easy Start
iv) Click Next again to proceed installation with the driver found.
v) Click Finish to complete the
driver installation.
vi) Depending on your system
configurations, you may be
prompted for your Windows
CD-ROM for some missing
files.
Replace your Installation CD
with Windows CD-ROM on
your CD-ROM Drive and click
OK.
vii) At the prompt for restart, click Ye s .
You may now proceed with Step 4 to verify if your modem has been installed
successfully.
The driver name (.inf) illustrated may be different from what you see on your
system. This is due to a different driver version being used during screens
capturing. What you see on your system is a more updated driver version.
10
ADSL PCI Modem Easy StartADSL PCI Modem Easy Start
ADSL PCI Modem Easy StartADSL PCI Modem Easy Start
ADSL PCI Modem Easy Start
3.3 For Windows®Me users
i) Power on your computer to start Windows. It will detect your newly-installed
modem and prompt for its driver.
Select Specify the
location of the driver
(Advanced) option.
Place the Installation
CD into your CD-ROM
drive and click Next.
ii) Click Specify a location.
For RFC 1483 and 1577 users, click Browse and navigate to '\W2k98Me\Lan'
folder on your CD-ROM drive.
For RFC 2364 users, click Browse and navigate to '\W2k98Me\Wan folder.
Click Next.
Altri manuali per DSL 300P
1
Altri manuali Aztech Modem
Aztech
Aztech DSL905E Series Manuale utente
Aztech
Aztech DSL705EU Manuale
Aztech
Aztech UM3100 Manuale utente
Aztech
Aztech 100U Scheda informativa del prodotto
Aztech
Aztech FG7003GRV(AC) Manuale utente
Aztech
Aztech MDP3880 Manuale utente
Aztech
Aztech 100U Scheda informativa del prodotto
Aztech
Aztech 56K External Modem Istruzioni per l’uso
Aztech
Aztech DSL305E Istruzioni per l’uso
Aztech
Aztech ADSL PCI Modem Scheda informativa del prodotto
Aztech
Aztech DSL600E Manuale utente
Aztech
Aztech HW831 Manuale utente
Aztech
Aztech DSL Turbo 900 Package Manuale utente
Aztech
Aztech PCI 56K Scheda informativa del prodotto
Aztech
Aztech EM6800 Manuale utente
Aztech
Aztech DSL905E Series Manuale utente
Aztech
Aztech 206U Manuale utente
Aztech
Aztech HomePlug AV with Simple Connect Button Manuale utente
Aztech
Aztech DSL Turbo 900 Package Manuale utente
Aztech
Aztech DSL901E Manuale utente
