B.R.M GF6 Manuale utente
USER GUIDE
Automatic movement
GF6 - GF7
Screw crown
Your B.R.M Chronographes watch was manufactured, assembled and checked
with the utmost care by our watch-makers.
To ensure longevity please read the following instructions carefully.
Time setting
Your automatic watch has a power reserve of approximately 38 hours.If the watch
is not worn daily the power reserve will run down and the watch will stop. To
set the time, unscrew the crown (A) and pull it to position 3. After setting the
time, return the crown to 0 by pressing and turning it to screw it back in without
forcing (B).
Position 2 is neutral.
0123
A B
Winding on
After a long time not worn,
please unscrew (A) your
crown, pull it to position 1.
The movement starts running again.
Water-resistance
All B.R.M Chronographes watches are waterproof. The indication of the
waterresistance level in meters is engraved on the back of the case. This
indication corresponds to the current norms of the watch-making industry. The
measurements have been carried out by application of pressure and depression.
The maintenance of the waterproof characteristics of your watch depends on
the care you will bring.
Never activate any button or corrector while in water. Before any contact with
liquids, make sure the winder is in position 0.
Safety Instructions
Your B.R.M Chronographes watch is a precision tool. It is important not to
expose it to:
- strong vibrations,
- magnetic elds,
- very sudden temperature changes,
- after sea use, rinse it out with tepid water.
Maintenance
The maintenance or repair of your B.R.M Chronographes watch must be carried
out exclusively by a B.R.M Chronographes authorized dealer.
brm-chronographes.com
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali B.R.M Orologio
