Baby Lock BLES8-CST Manuale utente
This table has additional holes to attach the Knit Woven Bias
Binder for chain/cover stitching on your Baby Lock Ovation
serger.
1. To use the Chain/Cover Stitch table for chain/cover
stitching, you will need to change the cutting blade cover
as follows:
A) Open front cover and cutting blade cover (fig. A & B).
B) Depress the center snap and gently pull toward you
to unsnap cutting blade cover (fig. C) and then snap
Chain/Cover Stitch table into place.
Alternate Chain/
Cover Stitch Table
(BLES8-CST)
Instructions
Baby Lock
Serger Accessories
(Instructions continued on back)
www.babylock.com
A
B
C
www.babylock.com
LNIS-BLES8-CST
C) Disengage the upper looper by turning the upper looper
positioning knob to “Down” (fig. D).
D) Move the stitch width adjusting dial to the 3.0 setting.
E) Turn cutting blade locking dial to “LOCK.”
F) To close the Chain/Cover Stitch table door, raise to the “Up”
position and slide to the left, placing the tab of the table
under the needle plate (fig. E).
F
D
E
Indice
Altri manuali Baby Lock Accessori per macchine da cucire
Baby Lock
Baby Lock Momentum BLQM Guida rapida alla configurazione
Baby Lock
Baby Lock BLQ2-AGF Manuale utente
Baby Lock
Baby Lock GALLANT BLGT15-RH Manuale utente
Baby Lock
Baby Lock BLQ2-OT Manuale utente
Baby Lock
Baby Lock BLQ2-QGF Manuale utente
Baby Lock
Baby Lock General Purpose Zig Zag Foot Manuale utente
Baby Lock
Baby Lock BLRG20ST Manuale tecnico
Baby Lock
Baby Lock Solaris BLSAU Manuale utente
Baby Lock
Baby Lock Pro-Stitcher Premium BLPS6 Manuale utente
Baby Lock
Baby Lock Pro-Stitcher Manuale di istruzioni
