BaByliss 3Q ADVANCED PERFORMANCE 2561U Manuale utente

MODEL 2561U

3Q ADVANCED PERFORMANCE STRAIGHTENER

Up to 235°C

Lock switch

12 digital heat settings

Quartz-Ceramic plates

3m salon

swivel cord

Advanced CeraThermTM heating system

Ultra-fast heat up

Wider 28mm plates

Auto shut off

Salon heat wrap

5 year guarantee

Super ionic

conditioning

Bringing a new era in technology for the ultimate in professional styling.

On/off

button

Sensor ProtectTM

Mode

SAFETY CAUTIONS

•This appliance should only be

used as described within this

instruction booklet. Please

retain for reference.

IMPORTANT CHILD SAFETY

•WARNING! Polythene bags

over a product or packaging

may be dangerous. To avoid

danger of suffocation, keep

this wrapper away from

babies and children. This

bag is not a toy.

WARNING! THIS APPLIANCE

GETS HOT!

•ALWAYS keep out of reach

of children (during and after

use and whilst cooling).

•This appliance should not be

used, cleaned or maintained

by children.

•Always take extra care if used

on children or near children.

•Do not use on very young

children.

IMPORTANT SAFETY

WARNING! Do not use this

appliance near water contained

in basins, bathtubs or other

vessels.

•Do not use the appliance

in the bathroom.

•Do not immerse the appliance

in water or other liquids.

•Always inspect the appliance

before use for noticeable

signs of damage. Do not

use if damaged, or if the

appliance has been dropped.

In the event of damage,

discontinue use immediately.

Contact the Conair Customer

Care Line (refer to ‘UK After

Sales Service’ section for

further information).

•Do not use the appliance

if the lead is damaged. In

the event of lead damage,

discontinue use immediately.

If the lead is damaged it

must be replaced by the

manufacturer. Return the

appliance to the Customer

Care Centre (refer to ‘UK

After Sales Service’ section

for further information). No

repair must be attempted by

the consumer.

•Do not leave the appliance

unattended when switched

on or plugged in.

•During use do not place

the appliance on any heat

sensitive surface, even when

using the heat wrap provided.

•Take care to avoid the hot

surface of the appliance

coming into direct contact

with the skin, in particular the

eyes, ears, face and neck.

•In the event the appliance

is left switched on, it will

automatically shut off after

72 minutes. If you wish to

continue using the appliance

after this time, simply press

the button marked for 1-2

seconds to turn the power

on.

•This appliance should not

be used by adults whose

reduced physical, sensory

or mental capabilities, or

whose lack of experience

and knowledge, might cause

a hazard, unless they have

been correctly instructed to

understand the safe use and

hazards involved and are

adequately supervised.

•After use, switch off and

unplug the appliance.

Immediately wrap the

appliance in the heat wrap

provided and continue to

keep out of the reach of

children as it will remain hot

for several minutes. Allow the

appliance to fully cool before

storing away.

•After use, do not coil the lead

around the appliance as this

may cause damage. Instead,

coil loosely by the side of the

appliance.

•This appliance complies with

the basic requirements of

Directives 2014/30/EU

(Electromagnetic Compatibility)

and 2014/35/EU (Electrical

Safety of Domestic

Appliances).

IMPORTANT! This straightener has a high performance Advanced CeraTherm™

heater and is designed to reach very high temperatures. Take care to avoid

the hot surfaces of the straightener coming into direct contact with the skin, in

particular the eyes, ears, face and neck.

Super Ionic Conditioning

Featuring a superior ionic generator which releases super frizz-controlling ions

on to the hair to smooth the cuticle for sleek, shiny and healthy looking hair.

NOTE: Turning on the appliance will automatically activate the ionic technology.

The release of the ions produces a slight buzzing noise.

Switch Activation Control

IMPORTANT! This straightener features delayed activation control to give

consistent results and ease of use whilst straightening. Immediately after

switching on the straightener you are able to adjust the temperature and activate

the ‘Sensor Protect’ mode. After 5 seconds of the appliance being turned on,

the controls will automatically lock. To make any adjustments after the controls

have locked, hold down the button of the required setting for 1-2 seconds, this

will deactivate the lock mode and allow the settings to be changed. To turn off

the appliance whilst in lock mode, hold down the button for 1-2 seconds until

the unit switches off.

INSTRUCTIONS FOR USE

•Towel dry and detangle the hair.

•Dry hair as normal.

•Always ensure your hair is completely dry before using the straightener. Never

use the straightener on wet hair.

•Plug the straightener into a suitable mains socket. Press and hold the

button for 1-2 seconds to turn the straightener on and select the desired

temperature by pressing the + or - buttons.

•There are twelve temperature settings, as a guide:

- Use the lower temperature settings (180-195°C) on ne, damaged or

coloured hair.

- Use the medium temperature settings (200-215°C) on normal hair.

- Use the higher temperature settings (220-235°C) on thicker, coarser hair.

•Allow the straightener to heat up for 15 seconds. Allow slightly longer if using

on the higher temperature settings.

•Activate the Sensor Protect™ technology by pressing the ‘Protect’ button for

enhanced heat protection.

•After use, press and hold the button for 1-2 seconds to switch off the

straightener and unplug from the power point.

•Wrap the straightener in the heat protection wrap provided and allow to fully

cool down before storing away.

Sensor Protect™ Technology

Select the protect mode for enhanced heat protection. The intelligent heat

control technology monitors and adjusts the plate temperature to deliver salon

straightening with care. There are two ways in which to use the straightener;

with or without the protect mode.

•After turning the straightener on, it will automatically set to 200°C. Select a

suitable temperature for your hair type by pressing the + or - buttons.

•If the protect mode is not activated the straightener will continue to operate at

the temperature selected.

•To use the straightener in protect mode, rst select a temperature, then press

the ‘Protect’ button.

•Once the protect mode has been activated the protect symbol will appear

within the LCD screen next to the temperature.

•The selected temperature will begin to ash registering that the protect mode

has been activated.

•After a few passes through the hair the Sensor Protect™ technology will

monitor and automatically adjust the temperature according to your hair

characteristics and will help to reduce the level of heat transfer on to the hair

during straightening.

•To return to normal operation, press the ‘Protect’ button to cancel the protect

mode. The unit will return to the original temperature selected.

Salon Heat Wrap

During use do not place the straightener on any heat sensitive surface, even when

using the heat wrap provided. After use, switch off and unplug the straightener.

Immediately wrap the straightener in the heat wrap provided and allow to fully

cool down. Continue to keep it out of the reach of children as it will remain hot

for several minutes.

Auto Shut Off

This straightener has an automatic shut off feature for added safety. If the

straightener is switched on for more than 72 minutes continuously, it will

automatically switch off. If you wish to continue using the straightener press and

hold the button for 1-2 seconds to turn the straightener on.

Indice

Altri manuali BaByliss Ferro da stiro

BaByliss

BaByliss Curl Elegance 2663PE Manuale utente

BaByliss

BaByliss i pro 230 ionic Manuale utente

BaByliss

BaByliss Nano Titanium MiraCurl BABNTMC1C Manuale utente

BaByliss

BaByliss pro 230 Manuale utente

BaByliss

BaByliss ST480E Manuale utente

BaByliss

BaByliss JAN THOMAS STUDIO STYLING JT2050E Manuale utente

BaByliss

BaByliss STRAIGHT AND CURL BRILLIANCE Manuale utente

BaByliss

BaByliss MIDNIGHT LUXE 235 Manuale utente

BaByliss

BaByliss 9000 Manuale utente

BaByliss

BaByliss pro 230 Manuale utente

BaByliss

BaByliss CURL SECRET 2667U Manuale utente

BaByliss

BaByliss Pro 180 2319E Manuale utente

BaByliss

BaByliss TITANIUM BRILLIANCE 2356U Manuale utente

BaByliss

BaByliss 271CE Manuale utente

BaByliss

BaByliss ST393E Manuale utente

BaByliss

BaByliss PRO BAB2335TTE Manuale utente

BaByliss

BaByliss liss&go GPB004E Manuale utente

BaByliss

BaByliss Curl Secret C1050E Manuale utente

BaByliss

BaByliss 2086CTE Manuale utente

BaByliss

BaByliss 2098BDU Manuale utente

BaByliss

BaByliss 2386U Manuale utente

BaByliss

BaByliss CURL PRO 210 Manuale utente

BaByliss

BaByliss 2583BU Manuale utente

BaByliss

BaByliss PRO 235 ELEGANCE Manuale utente

Manuali Ferro da stiro popolari di altre marche

Vitek

Vitek VT-2505 Manuale utente

Morphy Richards

Morphy Richards IB22063 Scheda informativa del prodotto

TZS First AUSTRIA

TZS First AUSTRIA Ida FA-5670-3 Manuale utente

izzy

izzy LN-112 Manuale utente

Vitek

Vitek VT-2310 Manuale utente

Okoia

Okoia HS23 Manuale utente

Arzum

Arzum TRENDCARE AR 5042 Manuale utente

SOLAC

SOLAC PP7251 Manuale utente

VS Sassoon

VS Sassoon VSLE330A Manuale utente

Philips

Philips HP8339 Manuale utente

Philips

Philips HP4666 Manuale utente

Vitek

Vitek VT-8291 Manuale utente

VS Sassoon

VS Sassoon miniPRO Wave Envy Manuale utente

Arzum

Arzum SUPERSTAR TOUCH Manuale utente

Remington

Remington S2880ZBA Manuale utente

cecotec

cecotec Bamba RitualCare 900 Wet&Dry Max Manuale utente

Philips

Philips HPS950 Manuale utente

Andis

Andis Gold CSI-1E Manuale utente