BalanceBox 650 Manuale utente
1
Installation manual
© COPYRIGHT – document number: 902936-00 – note: product specifications may change without prior notice.
BalanceBox®650
Floor Support
item number: 481A14001
2
BalanceBox®650 Floor Support
document number: 902936-00
General Warnings
Tools
3
BalanceBox®650 Floor Support
document number: 902936-00
Content of the box
(2x) E
(3x) C
(2x) D
(2x) A
(2x) B
(1x) H
(4x) G
(1x) E
4
BalanceBox®650 Floor Support
document number: 902936-00
Content of Bag with Screws [E]
1Assemble the profiles
[1:1]
(8x) J
(8x) K
(20x) L
(20x) M
(14x*) N* 2x spare
A
B
A
B
PIN
PIN
5
BalanceBox®650 Floor Support
document number: 902936-00
2Mount 4x plastic spring [N] on each wall bracket [C]
(12x) N
N
(3x) C
6
BalanceBox®650 Floor Support
document number: 902936-00
3Insert 6 screws [M] in each profile as shown
(6x) M(6x) M
(12x) M
7
BalanceBox®650 Floor Support
document number: 902936-00
4Place all 3 wall brackets [C] over the screws and mount each wall bracket with 4 nuts [L]
Make sure the middle wall bracket connects the aluminum profiles.
(12x) L
20 cm
8 in
20 cm
8 in
C
C
C
L
L
Tighten:
25 Nm
18 ft-Lbs
8
BalanceBox®650 Floor Support
document number: 902936-00
M
5Insert 4 screws [M] in each profile as shown.
(8x) M
9
BalanceBox®650 Floor Support
document number: 902936-00
6Place 2 interface brackets [D] over the screws and mount each interface bracket with 4 nuts [L]
Tighten the nuts by hand. The height setting of the BalanceBox®650 will follow.
7Mount the profile covers [G] on each end of the profile by using the fasteners [K]
Tap the fasteners in with a mallet.
(8x) L
(8x) K
K
(4x) G
D
D
L
Tighten:
25 Nm
18 ft-Lbs
10
BalanceBox®650 Floor Support
document number: 902936-00
8
Place the floor support against the wall. If needed reposition the top and bottom wall bracket.
Mark at least 4 holes per wall bracket, 2 holes left and 2 holes right. Do this for all 3 wall brackets.
Remove the floor support from the wall and drill the holes. Mount the floor support to the wall.
9
Define how high the BalanceBox®650 needs to be. Use the mounting height calculator on the website.
Depending on the BalanceBox®650 version the interface brackets need to be mounted as shown below.
Loosen the nuts in order to adjust the height of the interface brackets. After adjusting tighten the nuts well.
Floor to wall bracket:
5 – 30 cm / 2 – 12 in
Minimal height: 200 cm / 80 in
BalanceBox®650 Mk.1 (Grey):
484A07, 484A08, 484A09, 484A10
BalanceBox®650 Mk.2 (Black):
484A17, 484A18, 484A19, 484A20
≥ 2 ≥ 2
Tighten:
25 Nm
18 ft-Lbs
Altri manuali per 650
1
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali BalanceBox Rack e supporto
BalanceBox
BalanceBox 400 Manuale utente
BalanceBox
BalanceBox SMART 481A49001 Manuale utente
BalanceBox
BalanceBox 650 Guida
BalanceBox
BalanceBox SMART 481A24 Manuale utente
BalanceBox
BalanceBox Floorsupport Guida
BalanceBox
BalanceBox 481A71001 Manuale utente
BalanceBox
BalanceBox 400 Manuale utente
BalanceBox
BalanceBox Winx-4b Manuale utente
BalanceBox
BalanceBox 481A47001 Manuale utente
BalanceBox
BalanceBox X-Line Manuale utente
