Baldwin Boxall VIGIL3 Manuale utente

VIGIL3 Voice Alarm

Overview, Architecture and

Configuration

Manual name: VIGIL3 Overview, Architecture & Configuration

Issue: 2

ECR: 4494

Date of issue: December 2021

VIGIL3 Voice Alarm

Overview, Architecture and Configuration

ii VIGIL3 Overview, Architecture & Configuration issue 2

Wealden Industrial Estate

Farningham Road

Crowborough

East Sussex

TN6 2JR

Telephone: +44 (0)1892 664422

Email: [email protected].uk

Website: http://www.baldwinboxall.co.uk

This equipment has been designed and manufactured to conform to both CE &

UKCA requirements

Failure to use the equipment in the manner described in the product literature

will invalidate the conformity.

A “Declaration of Conformity” statement and a “Declaration of Performance” is

available on request.

VIGIL3 Voice Alarm

Overview, Architecture and Configuration

VIGIL3 Overview, Architecture & Configuration issue 2 iii

Amendment Record ___________________________________ v

Proprietary Notice ____________________________________ v

Safety Information ___________________________________ vi

Comments_________________________________________ vi

Introduction

Scope _____________________________________________1

VIGIL3 Voice Alarm Features ____________________________1

VIGIL3 Voice Alarm Description __________________________2

Architecture

VIGIL3 Module Connections _____________________________5

Centralised vs Distributed / Networked Systems ______________6

Audio Input and Output Numbering _______________________8

Microphones ________________________________________8

Audio Priorities _____________________________________ 10

Voice Alarm (VA) Active Indication _______________________ 11

Fire Panel Inputs_____________________________________ 11

Cause and Effect Rule Engine____________________________ 11

Power Distribution___________________________________ 13

Real Time Clock_____________________________________ 14

Fault Indication

Configuration

VIGIL3 Voice Alarm

Overview, Architecture and Configuration

iv VIGIL3 Overview, Architecture & Configuration issue 2

VIGIL3 Voice Alarm

Overview, Architecture and Configuration

VIGIL3 Overview, Architecture & Configuration issue 2 v

AMENDMENT RECORD

Change Note

Number

Nature of Amendment Date of

Amendment

N/A Initial release: Issue 1 Feb 2020

ECR4494 Issue 2: Correct OS1 and OS2 max distances Dec 2021

PROPRIETARY NOTICE

All data and information contained within this manual is of a

proprietary nature with the exclusive title to the same held by

Baldwin Boxall Communications Limited. The possession of this

manual and the use of the information is, therefore, restricted

only to those persons duly authorised by Baldwin Boxall

Communications Limited.

Do not reproduce, transcribe, store in a retrieval system or

translate into any language, any part of this manual without the

prior permission of Baldwin Boxall Communications Limited.

In the interest of continual product development, Baldwin Boxall

Communications Limited reserves the right to make changes to

product specification without notice or liability. Use of Baldwin

Boxall Communications Limited products as critical components

in life support systems is not authorised except with express

written approval from Baldwin Boxall Communications Limited.

VIGIL3 Voice Alarm

Overview, Architecture and Configuration

vi VIGIL3 Overview, Architecture & Configuration issue 2

SAFETY INFORMATION

Personnel who install, maintain or repair this equipment must

read the safety information below before starting work.

Voltages in excess of 30 Volts RMS or 50 Volts DC are considered

Hazardous and in certain circumstances can be lethal.

If Functional Testing, Maintenance, or Repair is to be completed

with the Mains Power (and/or battery backup) connected then

this should only be undertaken by personnel who are fully aware

of the danger involved and who have taken adequate precautions

and training.

This Manual contains Warnings, Cautions and Notes.

War nings describe potential threats to health or life, e.g.

WARNING

Before attempting to remove this component, ensure the Mains

Power Supply and Battery Backup have been disconnected.

Cautions describe potential threats to the equipment, e.g.

CAUTION

Notice must be taken of all cautions.

If a Caution is ignored the equipment may be damaged.

CAUTION: ELECTRO-STATIC SENSITIVE DEVICES

Observe the relevant precautions for the protection of Electro-

static Sensitive Devices when handling this equipment.

Notes are statements that are useful to the user in the context of

a particular section of the manual, e.g.

NOTE: Do not speak into the microphone until the "Speak Now" LED is

illuminated.

COMMENTS

Comments regarding the content of this manual are welcome and

should be addressed to hello@baldwinboxall.co.uk.

!!!

VIGIL3 Voice Alarm

Overview, Architecture and Configuration

VIGIL3 Overview, Architecture & Configuration issue 2 1

1Introduction

1.1 SCOPE

This document is an overview of a VIGIL3 EN54 Approved Voice

Alarm System.

1.2 VIGIL3 VOICE ALARM FEATURES

The Vigil Voice Alarm System offers the following features;

• Up to 800 audio outputs

• Up to 400 audio inputs

• Up to 400 RS485 control ports

• 64 simultaneous site wide audio channels

• 254 fully monitored voice alarm messages (8GB storage in

.wav format)

• Site wide configuration from a single location

• User customisable graphical touch screen control

• Rules based Cause & Effect / Phased Evacuation engine

• Fully modular and expandable

• Built in fault tolerant networking

VIGIL3 Voice Alarm

Overview, Architecture and Configuration

2VIGIL3 Overview, Architecture & Configuration issue 2

• Up to 24 band parametric equalisation

• Up to 1s audio delay

1.3 VIGIL3 VOICE ALARM DESCRIPTION

The VIGIL3 Voice Alarm range consists of a family modules that

when combined form a complete Voice Alarm and Public Address

System.

The following VIGIL3 modules are available;

• Amplifiers

• BV75D - 2 x 75W Amplifier Blocks

• BV150D -2 x 150W Amplifier Blocks

• BV300D - 2 x 300W Amplifier Blocks

• BV75Q - 4 x 75W Amplifier Blocks

• BV150Q - 4 x 150W Amplifier Blocks

• Battery Charger

• BVMBC - 10A battery charger

• Audio Routing

• BV3AOM8 - 8 Way Audio Output Module

• BV3AIM2 - 2 Way Audio Input Module

• BV3AIM4 - 4 Way Audio Input Module

•Networking

• BV3CIF - Copper Networking Interface

• BV3FIFM - Multimode Fibre Networking Interface

• BV3FIFS - Singlemode Fibre Networking Interface

• Interfacing

• BV3FPI - BV3AOM8 Fire Panel Termination Interface

• BVRDFPI - Fire Panel Interface

• BVRDCI - General Purpose I/O Interface

• Speaker Line Monitoring

VIGIL3 Voice Alarm

Overview, Architecture and Configuration

VIGIL3 Overview, Architecture & Configuration issue 2 3

• BVRDACO - 10 way AC line monitoring module with

changeover

• BVRDNCO - 10 way AC line monitoring module

• BVRDADC - 10 way DC line monitoring module with

changeover

• BV3ADIM / BV3ADIS - Up to 10 way DC line

monitoring modules with changeover and A/B isolation

• BVLAM - 8 Way Impedance Line monitoring module

• Cooling and Power Distribution

• BV3MDPEFM - Exhaust Fan Module - required for all

systems using mains distribution panels below

• BV3MDP05F - 5 way mains distribution and fans,

supports up to 5 VIGIL3 amplifiers (2 x main frames)

• BV3MDP10F - 10 way mains distribution and fans,

supports up to 10 VIGIL3 amplifiers (4 x main frames)

• BV3EFM - Single main frame standalone cooling, no

power distribution

• Microphones

• BVRDTSM - Touchscreen voice alarm control

microphone

• BVRDTSMMON - External monitor for BVRDTSM

allowing user customisation of graphical interface

• BFM401-408 - Single to 8 way Fire Microphones

• BDM401-416 - Single to 16 way Paging Microphones

NOTE: BVRD Microphones are not supported by VIGIL3 Systems.

Please refer to the individual Hardware Installation Guides for

specific information about the above modules.

VIGIL3 Voice Alarm

Overview, Architecture and Configuration

4VIGIL3 Overview, Architecture & Configuration issue 2

Indice

Altri manuali Baldwin Boxall Sistema di sicurezza

Baldwin Boxall

Baldwin Boxall Microdrive Manuale

Baldwin Boxall

Baldwin Boxall BVECASE5BATT Guida all'installazione

Baldwin Boxall

Baldwin Boxall VIGIL ECLIPSE Manuale utente

Baldwin Boxall

Baldwin Boxall VIGIL BVR20 Manuale

Manuali Sistema di sicurezza popolari di altre marche

Inner Range

Inner Range Concept 2000 Manuale utente

Climax

Climax Mobile Lite R32 Istruzioni per il montaggio

CADDX

CADDX NX-6 Manuale utente

FBII

FBII XL-31 Series Manuale utente

Johnson Controls

Johnson Controls PENN Connected PC10 Manuale utente

Aeotec

Aeotec Siren Gen5 Manuale utente

Blaupunkt

Blaupunkt SA 2700 Manuale utente

IDEAL

IDEAL Accenta Manuale del proprietario

AJAX

AJAX DoubleButton Manuale utente

Swann

Swann SW-P-MC2 Manuale utente

Ecolink

Ecolink Siren+Chime Manuale utente

Digital Monitoring Products

Digital Monitoring Products XR150 Manuale utente

EDM

EDM Solution 6+6 Wireless-AE Manuale utente

Highway Safety Group

Highway Safety Group EA401 Manuale utente

Siren

Siren LED GSM Manuale utente

Detection Systems

Detection Systems 7090i Istruzioni per il montaggio

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manuale utente

Siemens

Siemens FDM273 Manuale utente