BALLAST BL-3149 Manuale utente
CONGRATULATIONS ON YOUR NEW BALLAST TIMEPIECE
VOL.1.49 EN
BL-3149
INSTRUCTION MANUAL
GMT WATCH
24 Hours
Turning Bezel Minute Hand
Screw Down Crown
Crown
Position
0 1 2 3
Date
Hour Hand
Second Hand
GMT Hand
0 1 2 3
CLOSED:
SECURELY SCREWED
AND WATER RESISTANT
OPENED:
NOT SECURED
FOR WATER RESISTANCE
(2nd click)(1st click)
PLEASE READ THE FOLLOWING BEFORE UNSCREWING
THE CROWN:
SCREW-DOWN CROWN
Screw-down crowns are used to ensure water resistance. ALWAYS be certain
that your crown is securely screwed down (Position [0]is secured. Positions
[1], [2]and [3]are not secured for water resistance).
Do NOT unscrew your crown while you are in any environment where
moisture is present.
1
USING THE SCREW-DOWN CROWN
Do NOT pull the crown unless it is UNSCREWED first:
NOTE: Failure to SECURELY screw down the crown after setting the watch
may affect its water resistance.
TO UNSCREW:
Turn the crown anti-clockwise until it turns freely
without tension. GENTLY pull the crown out to the
other desired positions for watch setting (see specific
operating instructions on the following pages).
TO SCREW:
Push the crown ALL THE WAY IN (towards the
watch) THEN begin to turn clockwise until it is
securely screwed down.
0
1
HOW TO SET THE TIME
1. Unscrew the crown and pull it out to position [3]-(2nd click).
2. Turn the crown clockwise to set the correct time.
3. Push the crown in then screw it securely.
* Take a.m./p.m. into consideration when
setting the hour and minute hands to the
desired time.
* Always be certain that your crown is
SECURELY SCREWED; this will prevent
moisture from entering in.
0
23
0
2 3
4 5
HOW TO SET THE DATE
1. Unscrew the crown and pull it out to position [2]-(1st click).
2. Turn the crown clockwise to set the correct date.
3. Push the crown in then screw it securely.
0
2
0
* Do not set the date between 9:00 P.M. and
3:00 A.M. , otherwise the day may not change
properly. If it is necessary to set the date
during the time period, first change the time
to any time outside it, set the date and then
reset the correct time.
HOW TO SET SECOND TIME ZONE
1. Unscrew the crown and pull it out to position [2]-(1st click).
2. Turn the crown anti-clockwise to set the correct time zone indication.
(refer to the 24Hrs. marking on the bezel)
3. Push the crown in then screw it securely.
0
2
0
GMT Hand
24 hour making
on bezel
HOW TO READ THE SECOND TIME ZONE
The GMT function allows travellers to simultaneously read their local time and
a second time zone.
The local time is indicated by the conventional hour and minute and seconds
display.
The second time zone is indicated by the triangle tipped GMT hand read
against markings on the 24 Hours Dial ring.
Example :
You are travelling to Hong Kong from Zurich.
You will adjust the local time once in Hong Kong with the conventional hour
and minute hands.
You are able to adjust the GMT hand to read off the time in Zurich by setting it
6 hours behind the time in Hong Kong.
6
The triangle tipped GMT hand is always indicating Zurich time during your trip
in Hong Kong.
Local Time:
Hong Kong: 5pm
Example:
Second
Time Zone:
Zurich: 11am
7
GENERAL CARE
8 9
For more details on operating this timepiece
please refer to the enclosed booklet or visit :
im.ballast1903.com
WATER RESISIANT CHART
10
Indice
Altri manuali BALLAST Orologio
