B&B Electronics Elinx EIR508 Series Manuale utente

EIR508 Series-5107qsg

International Headquarters: 707 Dayton Road PO Box 1040 Ottawa, IL 61350 USA

815-433-5100 Fax 433-5104 www.bb-elec.com [email protected] [email protected]

European Headquarters: Westlink Commercial Park Oranmore Co. Galway Ireland

+353 91 792444 Fax +353 91 792445 www.bb-europe.com [email protected] [email protected]

oEthernet Switch

oCD with Support Manual

oThis Quick Start Guide

oPanel Mount Bracket

oIP Address: 192.168.16.1

oSubnet Mask: 255.255.255.0

oGateway: 192.168.16.254

oUser Name: root, Password: root

oRecord the switch’s MAC Address in the space

provided. The MAC Address is printed on the product

label. Provide the MAC Address to your Network

Administrator. The Network Administrator should

provide an IP Address, Subnet Mask, and Gateway.

oSelect a mounting location and install with the attached

DIN rail clip or included panel mount kit.

oConnect power to the switch

o12 to 48 VDC

oRedundant DC input is available with fault

contacts.

Pos Status

Description

OFF Disable port 1 Alarm

1 ON Enable port 1 Alarm

(If port 1 link fails, the fault LED will light)

OFF Disable port 2 Alarm

2 ON Enable port 2 Alarm

(If port 2 link fails, the fault LED will light)

OFF Disable port 3 Alarm

3 ON Enable port 3 Alarm

(If port 3 link fails, the fault LED will light)

OFF Disable port 4 Alarm

4 ON Enable port 4 Alarm

(If port 4 link fails, the fault LED will light)

OFF Disable port 5 Alarm

5 ON Enable port 5 Alarm

(If port 5 link fails, the fault LED will light)

OFF Disable port 6 Alarm

6 ON Enable port 6 Alarm

(If port 6 link fails, the fault LED will light)

OFF Disable port 7 Alarm

7 ON Enable port 7 Alarm.

(If port 7 link fails, the fault LED will light)

OFF Disable port 8 Alarm

8 ON Enable port 8 Alarm

(If port 8 link fails, the fault LED will light)

OFF Disable the ring master function.

9 ON Enable the switch as the ring master

in the redundant ring group.

LED Status Meaning

Green The Switch is powered on

Power Off The Switch is powered off

Green Power Source 1 is available

Power 1 Off Power Source 1 is unavailable

Green Power Source 1 is available

Power 2 Off Power Source 2 is unavailable

Yellow Power Source failure or Port Failure

Fault Off Normal Operation

Green Ring Master (Master of a redundant ring)

R.M. Off The switch is not a Ring Master

Green The port is linked

Blinking The port is receiving or transmitting packets

LNK/ACT

Ports 7 & 8 Off No device attached

Yellow Full Duplex Mode

Blinking Data Collision

FDX/COL

Ports 7 & 8 Off Half Duplex Mode

Green

10/100 Ports

Yellow

Quick Start Guide

Elinx Managed Ethernet Switch

EIR508 Series

Items Included

Default Settings

DIP Switch Settings

LED Chart

Hardware Installation

EIR508 Series-5107qsg

International Headquarters: 707 Dayton Road PO Box 1040 Ottawa, IL 61350 USA

815-433-5100 Fax 433-5104 www.bb-elec.com [email protected] [email protected]

European Headquarters: Westlink Commercial Park Oranmore Co. Galway Ireland

+353 91 792444 Fax +353 91 792445 www.bb-europe.com [email protected] support@bb-europe.com

oConnect a stand alone PC to a port on the switch.

Change the PC’s network IP Address to allow it to

connect to the switch (ex: 192.168.16.2). Use the

default subnet mask and gateway.

oLaunch the PC’s web browser and navigate to the

switch by typing the switch’s IP address in the browser

address window.

oNavigate the web page by clicking on the links located

on the top of the web page.

oClick on the IP Configuration link at the top of the web

page.

oEnter the IP Address, Subnet Mask, and Gateway

provided by your Network Administrator.

oSave changes

oDisconnect the stand alone PC and connect the switch

to the Network.

oInform your Network Administrator that the IP Address

has been changed.

oNOTE: The User Manual contains instructions for

assigning the IP Address from a DHCP Server.

oThis step should be accomplished by your Network

Administrator.

oLog onto the switch from a network PC.

oClick on the Security Manager link on the top of the web

page.

oEnter the new User Name and Password. Record this

information in the space provided below. File this

document for future reference.

oClick the Apply button.

oClick the “Save Configuration” link at the top of the web

page.

USER NAME: ______________________________________

PASSWORD:_______________________________________

MAC ADDRESS: ____________________________________

IP ADDRESS:_______________________________________

Basic Configuration is complete. A

comprehensive Manual is contained on the CD

ROM. Refer to this manual to configure the

advanced features of this switch.

Log into the Switch

IP Configuration

User Name and Password

Indice

Altri manuali B&B Electronics Router di rete

B&B Electronics

B&B Electronics ESW105 Series Manuale utente

B&B Electronics

B&B Electronics Elinx ESW500 Series Manuale utente

B&B Electronics

B&B Electronics Elinx EIRP305-T Manuale utente

B&B Electronics

B&B Electronics EIR618 Series Manuale utente

B&B Electronics

B&B Electronics EIR205 Series Manuale utente

B&B Electronics

B&B Electronics EIR41x-2SFP Series Manuale utente

B&B Electronics

B&B Electronics Conel UR5i v2 Libratum Manuale utente

B&B Electronics

B&B Electronics Elinx EIR608 Series Manuale utente

B&B Electronics

B&B Electronics SPECTRE Manuale utente

B&B Electronics

B&B Electronics SPECTRE Manuale utente

B&B Electronics

B&B Electronics IASW5P Manuale utente

B&B Electronics

B&B Electronics Conel ER75i Guida

B&B Electronics

B&B Electronics Elinx EIR510 Series Manuale utente

B&B Electronics

B&B Electronics EIR508-2-T Series Manuale utente

B&B Electronics

B&B Electronics EIR208 Series Manuale utente

B&B Electronics

B&B Electronics Elinx ESW626Series Manuale utente

B&B Electronics

B&B Electronics Elinx EIR418-2SFP-T Manuale utente

B&B Electronics

B&B Electronics Elinx ESW200 Series Manuale utente

B&B Electronics

B&B Electronics Elinx EIR408-T Manuale utente

B&B Electronics

B&B Electronics SPECTRE Foglio di istruzioni

B&B Electronics

B&B Electronics Elinx EIRP410-2SFP-T Manuale utente

B&B Electronics

B&B Electronics Elinx EIR610 Series Manuale utente

B&B Electronics

B&B Electronics Elinx ESW100 Series Manuale utente

B&B Electronics

B&B Electronics EIP308 Manuale utente

Manuali Router di rete popolari di altre marche

Allnet

Allnet ALL0333AU Manuale utente

HomeSeer

HomeSeer HT-SEL Manuale utente

Sercomm

Sercomm Genesis OC3505D Manuale utente

Billion

Billion BIPAC 5102 Series Manuale utente

TP-Link

TP-Link TD-8817 Manuale utente

Motorola

Motorola MR1900 Manuale utente

Digi

Digi IX14 Manuale utente

Cisco

Cisco NCS 540 Manuale

XAVi

XAVi X8821e Manuale utente

BEC

BEC 6200WZL Manuale utente

MikroTik

MikroTik hAP ac3 Series Manuale utente

Korenix

Korenix JetNet 5428G Series Manuale utente

NETGEAR

NETGEAR FS526T - Switch Manuale utente

Korenix

Korenix JetNet 5710G Series Manuale utente

Automated Logic

Automated Logic ZN551 Manuale del proprietario

Cisco

Cisco ASR 1000 Series Manuale dell'operatore

EnGenius

EnGenius ESR-9710 Manuale utente

Cisco

Cisco 805 Series Istruzioni operative e di sicurezza