BANKSTON Edition Office Pull 03 Guida alla configurazione
Install Instructions
Pull 03 W38 & W40
Australia
14 - 16 Stepney Street,
Stepney, South Australia 5069
P: +61 (0)8 8362 1133
bankstonarchitectural.com.au
New Zealand
P: +64 (0)6 359 0008
bankstonarchitectural.co.nz
SDG Trading Pty Ltd
trading as Bankston Architectural
ACN 008 154 041
ABN 18 008 154 041
Contact Us
Southern Design Group
*Image used for illustration
purposes only.
Scan for
Product &
Finish Care
Information
Scan for
New Zealand
Warranty
Scan for
Australian
Warranty
1.Marking the Door
1.1. Mark the xing point on the edge of your door
at the desired height.(Figure 1)
1.2 Afx the template below on the door.(Figure 2)
1.3 Cut the cavity of the semi-circle using your
preferred method.(Figure 3)
1.4 Apply your preferred adhesive and t to cut out.
(Figure 3)
Figure 1
Figure 2 Figure 3
Not Included
Included
1. Cavity Pull
IMPORTANT:
Please install this hardware in the following order to ensure
its warranty is not voided.
1. Install the hardware on raw/unnished door using the
instructions provided.
2. Remove hardware (where possible) and store safely. Do
not place tape onto the hardware as this will damage the
nish.
3. Paint / nish door.
4. Reinstall hardware.
80
160
DIA
160
Door Edge
Pull 03
Cutting Template
100% Scale
Scale 30mm
Indice
Altri manuali BANKSTON Serratura della porta
BANKSTON
BANKSTON Associati Guida alla configurazione
BANKSTON
BANKSTON Edition Office Pull 04 Guida alla configurazione
BANKSTON
BANKSTON Edition Office Lever 01 Manuale utente
BANKSTON
BANKSTON Edition Office Pull 01 Manuale utente
BANKSTON
BANKSTON Edition Office Lever 02 Manuale utente
BANKSTON
BANKSTON Edition Office Pull 02 Manuale utente
BANKSTON
BANKSTON Escutcheon Manuale utente
BANKSTON
BANKSTON Edition Office Hook Manuale utente
BANKSTON
BANKSTON Plate Euro Set Guida alla configurazione
