Banner WLS28..145X Manuale utente
Specifications
Supply Voltage and Current
12 to 30V dc (10% max. ripple)
Use only with suitable Class 2 power supply.
Max current and power per length:
Light
Length 12V dc 24V dc 30V dc Watts
145 mm 0.5A 0.25A 0.2A 6
285 mm 0.75A 0.375A 0.3A 9
430 mm 1.25A 0.625A 0.5A 15
570 mm 1.5A 0.75A 0.6A 18
710 mm 2.0A 1.0A 0.8A 24
850 mm 2.25A 1.125A 0.9A 27
990 mm 2.75A 1.375A 1.1A 33
1130 mm 3.0A 1.5A 1.2A 36
Connections
Integral 4-pin Euro style QD, or 2 m (6.5') integral cable
Mounting
(2) swivel brackets SMBWLS28RA included and (4) screws
Application Notes
When connecting cascadable lights in series it is important not to exeed
maximum current limitations:
Maximum length of light at 12V dc: 1.5 m
Maximum length of light at 24V dc: 3.0 m
Maximum length of light at 30V dc: 3.1 m
Wiring
1
3
12 - 30V dc 1 = Brown
3 = Blue
1
3
1
3
Male
Female
Wiring Key: 1 = Brown 3 = Blue
Dimensions
L1
L2
L4
L3
ON/OFF Switch
Models
WLS28 Work Light Strip
P/N 153761 rev. E 9/13/2011
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]
Dimensions are shown with included SMBWLS28RA bracket
Non-Switch Models
IP50 Models IP67/IP69K Models L1L2L3L4
WLS28..145X WLS28..145S 221 mm (8.7") 205 mm (8.1") 145 mm (5.71") 175 mm (6.9")
WLS28..285X WLS28..285S 362 mm (14.3") 346 mm (13.6") 286 mm (11.26") 316 mm (12.4")
WLS28..430X WLS28..430S 503 mm (19.8") 487 mm (19.2") 427 mm (16.81") 457 mm (18.0")
WLS28..570X WLS28..570S 644 mm (25.4") 628 mm (24.7") 568 mm (22.36") 598 mm (23.5")
WLS28..710X WLS28..710S 785 mm (30.9") 769 mm (30.3") 709 mm (27.91") 739 mm (29.1")
WLS28..850X WLS28..850S 926 mm (36.5") 910 mm (35.8") 850 mm (33.46") 880 mm (34.6")
WLS28..990X WLS28..990S 1067 mm (42") 1051 mm (41.4") 991 mm (39.02") 1021 mm (40.2")
WLS28..1130X WLS28..1130S 1208 mm (47.6") 1192 mm (46.9") 1132 mm (44.57") 1162 mm (45.7")
ON/OFF Switch Models
Model L1L2L3L4
WLS28..145XPB 251 mm (9.9") 235 mm (9.3") 145 mm (5.71") 205 mm (8.1")
WLS28..285XPB 392 mm (15.4") 376 mm (14.8") 286 mm (11.26") 346 mm (13.6")
WLS28..430XPB 533 mm (21.0") 517 mm (20.4") 427 mm (16.81") 487 mm (19.2")
WLS28..570XPB 674 mm (26.5") 658 mm (25.9") 568 mm (22.36") 628 mm (24.7")
WLS28..710XPB 815 mm (32.1") 799 mm (31.5") 709 mm (27.91") 769 mm (30.3")
WLS28..850XPB 956 mm (37.6") 940 mm (37") 850 mm (33.46") 910 mm (35.8")
WLS28..990XPB 1097 mm (43.2") 1081 mm (42.6") 991 mm (39.02") 1051 mm (41.4")
WLS28..1130XPB 1238 mm (48.7") 1222 mm (48.1") 1132 mm (44.57") 1192 mm (46.9")
Replacement Bracket and Unistrut Mounting Hardware
SMBWLS28RA
The bracket kit is available as a replacement for the one that comes
with the Work Light Strip. The kit contains 2 end brackets, 4 screws.
Optional SMH1316 Unistrut Mounting
Kit
SMBWLS28SM
This kit allows the light to be mounted at a right angle to the mounting
surface. The kit contains 2 end brackets, 4 screws.
WLS28 Work Light Strip
Warranty: Banner Engineering Corporation warrants its products to be free from defects for a period of one
year. Banner Engineering Corporation will repair or replace, free of charge, any product of its manufacture
found to be defective at the time it is returned to the factory during the warranty period. This warranty does not
cover damage or liability for the improper application or installation of Banner products. This warranty is in lieu
of any other warranty either expressed or implied.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]
Questo manuale è adatto per i seguenti modelli
23
Indice
Altri manuali Banner Luce da lavoro
