Barbie Tune Blossom BAR100 Manuale utente
BAR100
Barbie and associated trademarks and trade dress are owned by, and used under
license from, Mattel, Inc. ©2007 Mattel, Inc. All Rights Reserved.
Tune Blossom Personal CD Player
OWNER'S MANUAL
TM
See page 15
for your hidden
GEMSTONE FUN
button surprise!
SAFETY PRECAUTIONS
1
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
DANGEROUS VOLTAGE:
The lightning flash with arrowhead symbol within an equilateral
triangle is intended to alert the user to the presence of
uninsulated dangerous voltage within the product’s enclosure
that may be of sufficient magnitude to constitute a risk of
electric shock to persons.
ATTENTION:
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
DANGER:
Invisible and hazardous laser radiation when open and
interlock failed or defeated. Avoid direct exposure to beam.
LASER SAFETY: This unit employs a laser. Only qualified service
personnel should attempt to service this device due to possible
eye injury.
CAUTION: USE OF CONTROLS, ADJUSTMENTS OR
PERFORMANCE PROCEDURE HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
2
INFORMATION:
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this unit near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation
openings. Install in accordance
with manufacturer’s instructions.
8. Do not install near any heat
sources such as radiators, heat
registers, stoves or other
apparatus (including amplifiers)
that produce heat.
SAFETY INSTRUCTIONS
FCC WARNING:
This equipment may generate or use radio frequency energy. Changes
or modifications to this equipment may cause harmful interference
unless the modifications are expressly approved in the instruction
manual. The user could lose the authority to operate this equipment if an
unauthorized change or modification is made.
3
9. Do not defeat the safety
purpose of the polarized or
grounding-type plug. A
polarized plug has two blades
with one wider than the other.
A grounding-type plug has two
blades and a third grounding
prong. The wide blade or the
third prong are provided for
your safety. If the provided plug
does not fit into your outlet,
consult an electrician for
replacement of the obsolete
outlet.
10. Protect the power cord from
being walked on or pinched
particularly at plugs,
convenience receptacles, and
the point where they exit from
the unit.
11. Only use attachments/
accessories specified by the
manufacturer.
12. Unplug this unit during
lightning storms or when
unused for long periods of
time.
13. Refer all servicing to qualified
service personnel. Servicing is
required when the unit has
been damaged in any way,
such as the following: the
power-supply cord or plug has
been damaged; liquid has
been spilled or objects have
fallen into the unit; and/or the
unit has been exposed to rain
or moisture, does not operate
normally, has changed its
performance or has been
dropped.
14. This unit should not be
exposed to dripping or
splashing water and no object
filled with liquids such as vases
should be placed on the unit.
15. Do not overload wall outlet.
Use only power source as
indicated.
16. Use replacement parts as
specified by the manufacturer.
17. The product may be mounted
toawall only if recommended
by the manufacturer.
18. Upon completion of any
service or repairs to this
product, ask the service
technician to perform safety
checks.
4
Emerson Radio Corp. has produced this audio product under
license from Mattel. We have taken great care to make sure your
unit was in perfect working order when it left our factory.
It has been designed to give you many years of enjoyment and
trouble-free operation. Read this manual before operating this unit
to become familiar with its features. In the event you require
technical assistance, please contact the Emerson Radio Customer
Service hotline at 1-800-898-9020. Retain this manual for
future reference.
WARNING
Choking Hazard–Small Parts and Packaging Materials. Not for children
under 5 years.
• All materials for fastening or packing purposes are not part of the unit and
should be discarded for children’s safety.
• Please keep all information for future reference.
• This is not a toy.
0-5
NOTES:
•Please avoid using this unit in places of high temperature or
humidity over prolonged periods of time as damage may occur.
•Exposure to direct sunlight in places such as car interiors may
cause the unit to become warped and/or lead to malfunctioning.
•Avoid using or storing this unit in dusty or sandy locations.
5
Dear Customer:
Selecting fine audio equipment such as the unit you’ve just purchased is only the start of your
musical enjoyment. Now it’s time to consider how you can maximize the fun and excitement
your equipment offers. This manufacturer and the Electronic Industries Association’s
Consumer Electronics Group want you to get the most out of your equipment by playing it at
asafe level. One that lets the sound come through loud and clear without annoying blaring or
distortion and, most importantly, without affecting your sensitive hearing.
Sound can be deceiving. Over time your hearing “comfort level” adapts to higher volumes of
sound. So what sounds “normal” can actually be loud and harmful to your hearing. Guard
against this by setting your equipment at a safe level BEFORE your hearing adapts.
To establish a safe level:
• Start your volume control at a low setting.
• Slowly increase the sound until you can hear it comfortably and clearly, and
without distortion.
Once you have established a comfortable sound level:
• Set the dial and leave it there.
Taking a minute to do this now will help to prevent hearing damage or loss in the future. After
all, we want you listening for a lifetime.
We Want You Listening For A Lifetime
Used wisely, your new sound equipment will provide a lifetime of fun and enjoyment. Since
hearing damage from loud noise is often undetectable until it is too late, this manufacturer and
the Electronic Industries Association’s Consumer Electronics Group recommend you avoid
prolonged exposure to excessive noise. This list of sound levels is included for
your protection.
Decibel
Level Example
30 Quiet library,soft whispers
40 Living room, refrigerator,bedroom away from traffic
50 Light traffic, normal conversation, quiet office
60 Air conditioner at 20 feet, sewing machine
70 Vacuum cleaner, hair dryer, noisy restaurant
80 Average city traffic, garbage disposals, alarm clock at two feet
THE FOLLOWING NOISES CAN BE DANGEROUS UNDER
CONSTANT EXPOSURE:
90 Subway, motorcycle, truck traffic, lawn mower
100 Garbage truck, chain saw, pneumatic drill
120 Rock band concert in front of speakers, thunderclap
140 Gunshot blast, jet engine
180 Rocket launching pad
Information courtesy of the Deafness Research Foundation.
A
S
S
O
C
I
A
T
I
O
N
EST. 1924
E
L
E
C
T
R
O
N
I
C
I
N
D
U
S
T
R
I
E
S
EIA
We
LISTENING
For A Lifetime
Want You
LOCATION OF CONTROLS
6
1
2
3
4
5
6
7
8
11
9
12
14
16
13
10
15
1. DC 4.5V Jack
(Side of Unit)
2. Display
3. Battery Compartment
(Rear of Unit)
4. CD Compartment
5. SKIP/SEARCH oButton
6. PROG. Button
7. ASP (Anti-Shock
Protection) Button
8. HOLD (ON/OFF) Switch
9. SKIP/SEARCH nButton
10. PHONES Jack
(Side of Unit)
11. GEMSTONE FUN Button
12. POWER ON/PLAY/
PAUSE ®p Button
13. VOLUME Control
14. POWER OFF/
STOP XButton
15. MODE Button
16. CD Door OPEN Switch
7
LOCATION OF CONTROLS (CONTINUED)
1
2
3
4
5
6
7
8
9
1. REPEAT 1 ( )/ALL ( ) Indicator
2. Track/Time Display
3. PRG (Program) Indicator
4. SHUFF (Shuffle) Indicator
5. INTRO Indicator
6. Hold ( ) Indicator
7. Battery Low ( ) Indicator
8. EQ (Equalizer) Indicators
9. ANTI-SHOCK Indicator
9
9
9
LCD DISPLAY
POWER SOURCES
8
This CD player requires either two (2) “AA” batteries (not included) or an AC
adapter (not included).
BATTERY INSTALLATION
The Battery indicator ( ) will appear in the CD display when the batteries
need replacing.
1. Open the Battery Compartment door by
pressing in on the tab and then lifting it. To
prevent the possibility of losing the cover, it
cannot be removed.
2. Insert two (2) “AA” batteries (not included)
according to the polarity diagram inside the
battery compartment. Alkaline batteries are
recommended for the longest playing time.
AC OPERATION
To operate the unit using AC power, connect an AC adapter (not included)
to an AC outlet having 120V, 60Hz AC only. Plug the small end into the
DC4.5V zjack on the side of the unit and connect the other end into
the AC outlet. The batteries are automatically disconnected when the AC
adapter is used.
CAUTION:When not using AC power, disconnect the AC adapter from the
wall outlet by pulling the plug (not the cord). Do not touch the AC adapter
with wet hands. Fully insert the plug without exposing any part of the blade.
–
+
–
+
9
OPERATION
Open the CD compartment door by
sliding the CD Door OPEN switch.
Insert a disc onto the center spindle
(label side up) and push down gently to
make sure it is securely on the spindle.
Close the CD compartment door.
Insert the headphones into the
PHONES jack.
1
1
1
Press the POWER ON/PLAY/
PAUSE ®p button to turn on the
unit and begin playback on Track 1.
1
1
2
Adjust the VOLUME control
as desired.
1
1
3
To skip forward or backward through
the tracks on the disc, press and
release the SKIP/SEARCH o1or
n2button.
To search forward or backward
through the disc, press and hold the
SKIP/SEARCH o 1 or n2button.
2
1
4
TO INSERT AND PLAY A CD
CONTINUED ON THE NEXT PAGE
Indice
Altri manuali Barbie Lettore CD
