Barco MXRT-5600 Manuale utente

VisionTek®

THUNDERBOLT™ 3 MINI eGFX ENCLOSURE

For further information on this product, including

compatible mobile workstations, installation, and

troubleshooting, please visit:

www.barco.com/egfx

The eGFX Enclosure with Barco MXRT-5600 allows

you to drive powerful graphics from a laptop

computer using aThunderbolt™ 3 connection.

Before using the enclosure, closely follow the setup

instructions and ensure you are using a Barco-

approved mobile workstation running Windows 10.

Quick Start Guide

Note: Your computer’s Thunderbolt™3 ports

might not function properly until you update one

or more of the following on your computer:

•

BIOS

•

Thunderbolt™firmware

•

Thunderbolt™3 controller drivers

•

Thunderbolt™3 software

1. Ensure the latest BIOS, Thunderbolt™and

Windows updates have been installed. Visit

your PC manufacturer’s website to

download the latest software.

2. Download the latest version of the Barco

MXRT Driver Installation Package for your

region from the following URL:

https://www.barco.com/en/support/mxrt-5600

Software Setup:

1 | Quick Start Guide

3. Select the self-extracting installation package

file and begin the installation process with local

administrator rights to install software on your

computer.

4. Make sure to select all software packages and

proceed with installation.

Note: The computer may restart multiple times during the

installation process.

2 | Quick Start Guide

1. Once the driver has successfully installed,

connect the AC power adapter to the

enclosure and to a power outlet . Turn on the

AC adapter.

2. Connect the Thunderbolt™ 3 cable to the

computer.

Hardware Setup:

Note: Use only active Thunderbolt™ 3 cables for runs longer

than 0.5m.

3 | Quick Start Guide

1. After connecting the eGFX enclosure, the

Thunderbolt™device will be detected by the

computer. Click to approve the device.

2. When the system shows the dialogue box

below, select “Always Connect” for each

controller.

Click “OK” to complete setup.

3. The system should recognize your displays at

this point.

Thunderbolt™ Configuration:

4 | Quick Start Guide

1. To extend the desktop

and configure the

displays, access the

Display Settings panel

by right clicking on the

desktop and selecting

“Display settings”.

Display Configuration:

2. Depending on your configuration, the displays

should be visible similar to the image below.

If the desktop is not automatically extended to

connected displays, proceed to Step 3.

5 | Quick Start Guide

3. Select the target display in

the “Rearrange your

displays” window in Step 2.

In the “Multiple Displays”

dialogue box select “Extend

desktop to this display”.

4. In the “Scale and layout”

window select the

appropriate resolution

for your display.

Always be sure to select “Keep changes” when

prompted.

At this point your system setup is complete. See

the following page for additional support

resources.

6 | Quick Start Guide

For product support contact:

Healthcare USA/Canada

Toll-free call:

1 (866) 992-2726

Hours: 8 am to 8 pm EST

Website:

www.barco.com/egfx

R5912441 Rev. 00 2020-01-21

Barco NV | Beneluxpark 21, 8500 Kortrijk, Belgium

Registered office: Barco NV | President Kennedypark 35,

8500 Kortrijk, Belgium

www.barco.com

Indice

Altri manuali Barco Controllori

Barco

Barco EC-210 Manuale utente

Barco

Barco EOS X Terminal Manuale utente

Barco

Barco BarcoMed 2MP2HX Manuale utente

Barco

Barco P110 Manuale utente

Barco

Barco Sedomat 2500 Manuale del proprietario

Barco

Barco Sedomat 5500 Manuale utente

Barco

Barco OptiTwist Manuale utente

Barco

Barco TransForm A series Manuale utente

Barco

Barco EC Series Manuale di installazione e funzionamento

Barco

Barco Argus Manuale del proprietario

Barco

Barco KVD Manuale utente

Barco

Barco Sedomat 1500 Manuale utente

Barco

Barco Sedomat 5000 Manuale utente

Barco

Barco TransForm A Manuale utente

Barco

Barco Argus X Terminal Manuale utente

Barco

Barco Sedomat 5800 Manuale utente

Barco

Barco Hydra Compact Manuale utente

Barco

Barco TransForm A Manuale utente

Barco

Barco EC-30 Manuale utente

Barco

Barco Sedomat 2800 Manuale utente

Barco

Barco Sedomat 1800 Manuale utente

Barco

Barco Hydra Compact Manuale utente

Barco

Barco ScreenPRO-II Manuale utente

Barco

Barco ScreenPRO II Manuale utente

Manuali Controllori popolari di altre marche

Digiplex

Digiplex DGP-848 Istruzioni operative

YASKAWA

YASKAWA SGM series Manuale utente

Sinope

Sinope Calypso RM3500ZB Manuale utente

Isimet

Isimet DLA Series Style 2 Manuale di installazione

LSIS

LSIS sv-ip5a Manuale utente

Rockwell Automation

Rockwell Automation 1769-L31 Manuale utente

Airflow

Airflow Uno hab Manuale utente

ABB

ABB ACS580-01 drives Manuale utente

Panasonic

Panasonic GM1 Series Manuale utente

Emerson

Emerson SW93 Manuale utente

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manuale utente

Panasonic

Panasonic FP? Positioning Unit RTEX Manuale utente

Samson

Samson Type 5824 Manuale di servizio

Alpha IP

Alpha IP MIOB 21001 Manuale utente

Siemens

Siemens OpenAir GMA 1 Series Manuale utente

Surecom

Surecom SR-629 Manuale utente

Fishman

Fishman TriplePlay Manuale utente

Regulus

Regulus SRS1 T Manuale utente