Barco Coronis Manuale utente
User Manual
Coronis
(This page intentionally left blank.)
2
(This page intentionally left blank.)
3
Using the online User Guide
Sources of information
4
Sources of information
Overview of Coronis documentation
Document Content
Quick install sheet Gives a short overview of the instal-
lation of a complete system.
Getting started guide
(booklet)
Gives a detailed description of the
installation and connection of a
complete system.
Online user guide
(html file)
Gives a detailed description of how
to operate the display using its local
controls and on-screen display
(OSD). This document is to be con-
sulted on screen.
User manual (PDF file
on CD-ROM)
Contains the same information as
the online user manual, but is laid-
out for printing.
User interface
5
User interface
Items in the navigation frame:
Items in the toolbar frame
Item Description
Contents Shows the complete content of the
help system.
Index Shows the available help topic
entries in alphabetic order.
Search Allows to search for a particular
entry in the help system.
Favorites Allows to add and remove help top-
ics to a list of favorites. (requires
cookies)
Item Description
Synchronize Press this button to show the loca-
tion of the help item in the Con-
tents.
Previous Press this button to move to the
previous help topic.
Next Press this button to move to the
next help topic.
Related topics Press this button to display related
topics (if available).
E-mail Press this button to e-mail the cur-
rent help topic.
Print Press this button to print the current
help topic.
User interface
6
Bookmark Press this button to bookmark the
current help topic. This topic will
then appear in the web browser’s
Favorites menu. (requires cookies)
Item Description
7
Graphic board information
BARCO MXRT control panel settings
8
BARCO MXRT control panel settings
This chapter describes how to configure the displays in your BARCO
CORONIS Display System using the tools available through the Advanced
button on the Settings tab of the Windows Display Control Panel.
Note: If you purchased Barco Medical Displays only and not a
complete BARCO CORONIS Display System you will need to refer to
the user manual for the display controller you are using.
Accessing the Barco tab
Note: You must have logged on to Windows using an account
with administrator privileges in order to use the Barco portions of
the Windows Display Control Panel to change any display settings.
1. Open the Windows Display Control Panel by one of the two
methods below:
a) Start > Settings > Control Panel > Display
or
b) Open the “Display Properties Control Panel” by right
clicking in an empty area on the desktop, then select
Properties.
2. Click on the Settings tab.
3. Select the rectangle that represents the Barco Coronis display
whose settings you wish to change.
4. Click on the Advanced button.
5. Select the Barco tab from the Properties screen.
Using the Barco tab
The Barco tab is divided into three sections. The first section provides
information about the graphics controller and allows access to the
graphics controller advanced configuration pages. The second section
BARCO MXRT control panel settings
9
provides information about the display. The bottom section allows
access to two Barco tools, Barco System Report and MediCal QAWeb.
Aslo, there is a active link to the Barco Medical Imaging Systems web
site.
Figure 1: Barco Tab
Barco System Report
The Barco System Report, also known as BarcoMed SelfExam, is a wizard
based tool which collects data about the components that are installed
in your system. This information is used by the Barco MIS Support team
when trying to resolve cusotmer issues.
MediCal QAWeb
Clicking on the MediCal QAWeb button will launch the MediCal QAWeb
application. Please refer to the MediCal QAWeb manual for information
about this application.
BARCO MXRT control panel settings
10
Advanced Properties
To access the advanced properties configuration pages for the display
controller(s) for your BARCO CORONIS Display System, click on the
Advanced button in the Graphics Device Information section.
MXRT controller advanced configuration
There are four pages accessible from the advanced configuration button.
They are:
•OpenGL
• Direct3D
•Details
• Configuration
•Barco
OpenGL and Direct3D
The OpenGL and Direct3D pages of the Advanced Properties page are
divided into two sections: Main Settings and Custom Settings.
Main Settings
In the Main Settings section there is a slider bar which allows the user
to adjust the OpenGL or Direct 3D settings for optimum performance,
optimum quality or a for a point in between. There is also a checkbox
provided for enabling Custom Settings.
Custom Settings
Note: Barco recommends that you use the default settings,
unless your viewing application vendor provides detailed
information on custom settings.
In the Custom Settings section the user can fine tune the following
options:
Altri manuali Barco Monitor
Barco
Barco MDRC-2120 Manuale del proprietario
Barco
Barco Coronis 3MP Manuale
Barco
Barco MDRC Series Manuale utente
Barco
Barco MFGD 1318 Manuale utente
Barco
Barco iStudio Manuale utente
Barco
Barco MDNG-5221 Manuale utente
Barco
Barco OPScenter Manuale utente
Barco
Barco Nio 5MP Manuale utente
Barco
Barco Nio 5.8MP Gray Manuale utente
Barco
Barco MDSC-2224 Manuale utente
Barco
Barco RHDM-1701 Manuale utente
Barco
Barco KVD5521 Manuale utente
Barco
Barco MDSC-8258 Manuale utente
Barco
Barco Nio Fusion12MP Manuale utente
Barco
Barco WeaveMaster Manuale utente
Barco
Barco MDSC-2232 Series Manuale utente
Barco
Barco MDCG-5221 Manuale utente
Barco
Barco DM-1131 Manuale utente
Barco
Barco MDSC-8255 MNA Manuale utente
Barco
Barco MDMG-5221 Manuale del proprietario
