Barco MFCD 1219 (TS Manuale utente

User Manual

MFCD 1219 (T S)

(This page intentionally left blank.)

This document is copyrighted. All rights are reserved. Nor this

document, nor any part of it, may be reproduced or copied in any form

or by any means - graphical, electronic, or mechanical including

photocopying, taping or information storage and retrieval systems -

without written permission of Barco

Table of Contents

Preface ................................................................................................. 5

Environmental information.......................................................... 7

Safety Instructions........................................................................ 7

Recommendations for using your display system ................... 10

Overview............................................................................................ 12

Introduction ................................................................................ 12

Package contents ....................................................................... 13

Controls and connectors............................................................. 14

Installation ......................................................................................... 15

Precautions ................................................................................. 15

Wall mounting............................................................................ 15

Connecting the signals............................................................... 17

Starting up .................................................................................. 18

Install the software.................................................................... 20

On-screen display (OSD) ................................................................... 21

How to use the OSD ................................................................... 21

Description of the menu items.................................................. 22

Maintenance...................................................................................... 29

Appendix A: Possible resolutions ..................................................... 30

Appendix B: Technical specifications................................................ 31

Preface

Notice

Although every attempt has been made to achieve technical accuracy in

this document, we assume no responsibility for errors that may be

found. Our goal is to provide you with the most accurate and usable

documentation possible; if you discover errors, please let us know.

BarcoView software products are the property of BarcoView. They are

distributed under copyright by Barco N.V. or BarcoView, LLC., for use only

under the specific terms of a software license agreement between

Barco N.V. or BarcoView LLC. and the licensee. No other use, duplication,

or disclosure of a BarcoView software product, in any form, is

authorized.

The specifications of BarcoView products are subject to change without

notice.

Trademarks

All trademarks and registered trademarks are property of their

respective owners.

FCC Compliance Information (display)

This device complies with Part 15 of the FCC Rules. Operation is subject

to the following two conditions: (1) this device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television

Preface

reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or

more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for

help.

Canadian notice

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la Classe B est conforme à la norme NMB-

003 du Canada.

Preface

Environmental information

Disposal Information

The lamps inside the display contain mercury. Do not throw the display

in the trash. Dispose of it as required by local ordinances or regulations.

This equipment has required the extraction and use of natural resources

for its production. It may contain hazardous substances for health and

environment.

In order to avoid the dissemination of those substances in the

environment and to diminish the pressure on natural resources, we

encourage you to use the appropriate take-back systems.

Those systems will reuse or recycle most of the materials of your end-

of-life equipment in a sound way.

The crossed-out wheeled bin symbol invites you to use those

systems.

If you need more information on the collection, reuse and

recycling systems, please contact your local or regional waste

administrator.

You can also contact us for more information on the environmental

performances of our products.

Safety Instructions

General Recommendations

Read the safety and operating instructions before operating the display.

Retain safety and operating instructions for future reference.

Adhere to all warnings on the display and in the operating instructions

manual.

Follow all instructions for operation and use.

Preface

Electrical shock

Type of protection (electrical):

Class I equipment

Degree of safety (flammable anesthetic mixture):

Equipment not suitable for use in the presence of a flammable

anesthetic mixture with air or with oxygen or nitrous oxide.

Power connection

• Power requirements: The display must be powered using the 12

VDC power supply that is supplied with the display.

• The 12 VDC power supply must be powered by the AC mains

voltage.

•Powercords:

Power cord with CEE 7 plug: The colors of the mains

lead are colored in accordance with the following

code: Green-and-yellow: Earth (safety earth), Blue:

Neutral, Brown: Line

Power cord with ANSI 73.11 plug: The wires of the

power cord are colored in accordance with the

following code: Green/yellow: ground, White: neutral,

Black: line (live)

• Do not overload wall outlets and extension cords as this may

result in fire or electric shock.

• Mains lead protection (U.S.: Power cord): Power cords should be

routed so that they are not likely to be walked upon or pinched

by items placed upon or against them, paying particular

attention to cords at plugs and receptacles.

Preface

Water and moisture

Never expose the display to rain or moisture.

Never use the display near water - e.g. near a bathtub, washbasin,

swimming pool, kitchen sink, laundry tub or in a wet basement.

Ventilation

Do not cover or block the ventilation openings in the cover of the set.

When installing the display in a cupboard or another closed location,

heed the necessary space between the set and the sides of the

cupboard.

Installation

Place the display on a flat, solid and stable surface that can bear the

weight of at least 3 displays. If you use an unstable cart or stand, the

display may fall, causing serious injury to a child or adult, and serious

damage to the equipment.

Do not lean/rest or add additional weight on the display.

When adjusting the angle of the display, move it slowly so as to prevent

the display from moving or slipping off from its stand.

When display is attached to an arm, do not use the display as a handle

or grip in order to move the display. Please refer to the instruction

manual of the arm for instructions on how to move the arm with the

display.

Provide full attention to safety during installation, periodic maintenance

and examination of this product.

Sufficient expertise is required for installing this product, especially to

determine the strength of the wall for withstanding the display’s

weight. Be sure to entrust the attachment of this product to the wall to

authorised contractors of Barco and pay adequate attention to safety

during the installation and usage.

Barco is not liable for any damage or injury caused by mishandling or

improper installation.

More warnings in the Installation chapter.

Preface

This apparatus conforms to:

CE (LVD 73/23/EEC), IEC 60950-1, UL 60950-1,

CAN/CSA C22.2 No. 60950-1 (c-UL), EN 60950-1 DEMKO,

CCC GB4943-1995

National Scandinavian Deviations for Cl. 1.7.2 :

Finland: "Laite on liitettävä suojamaadoituskoskettimilla varustettuun

pistorasiaan"

Norway: "Apparatet må tilkoples jordet stikkontakt"

Sweden: "Apparaten skall anslutas till jordat uttag"

Recommendations for using your display system

1. Optimize the lifetime of your display

Enabling the Display Power Management System (DPMS) of your display

(in the display’s Settings menu) will optimize its diagnostic lifetime by

automatically switching off the backlight when the display is not used

for a specified period of time. By default, DPMS is enabled on your

display, but it also needs to be activated on your workstation. To do this,

go to “Power Options Properties” in the “Control Panel”.

Barco recommends setting DPMS activation after 20 minutes of

non-usage.

2. Use a screen saver to avoid image retention

Prolonged operation of an LCD with the same content on the same

screen area may result in a form of image retention.

You can avoid or significantly reduce the occurrence of this phenomenon

by using a screen saver. You can activate a screen saver in the “Display

properties” window of your workstation.

Barco recommends setting screen saver activation after 5 minutes

of non-usage. A good screen saver displays moving content.

In case you are working with the same image or an application with

static image elements for several hours continuously (so that the screen

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Barco Monitor

Barco

Barco OVL-815 Istruzioni per l'installazione

Barco

Barco SP-10 Manuale utente

Barco

Barco OverView EVD-4621 Manuale del proprietario

Barco

Barco Coronis Manuale utente

Barco

Barco MDRC-1119 TS Manuale del proprietario

Barco

Barco HDM 5049 PLUS Manuale utente

Barco

Barco Coronis MDCC 2121 Manuale utente

Barco

Barco MFCD-1219 Manuale utente

Barco

Barco MDRC-2224 WP Manuale utente

Barco

Barco MDCC-4330 Manuale utente

Barco

Barco CDMS-3000 Manuale utente

Barco

Barco Nio Color 2MP Manuale utente

Barco

Barco Coronis Fusion 4MP Manuale utente

Barco

Barco MDNG-6221 Manuale utente

Barco

Barco RHDM-1701 Manuale utente

Barco

Barco OverView OVL815 Manuale del proprietario

Barco

Barco OPScenter Manuale utente

Barco

Barco MDNG-3220 Manuale utente

Barco

Barco MDNG-5221 Manuale utente

Barco

Barco iSurveillance Manuale utente

Barco

Barco E-2320 C Manuale utente

Barco

Barco FIMI MDSC8156 Manuale utente

Barco

Barco MDCG-5221 Manuale utente

Barco

Barco Nio E-2621 Manuale elenco delle parti

Manuali Monitor popolari di altre marche

Linear Acoustic

Linear Acoustic LQ-1000 Manuale utente

AOC

AOC I2579V Manuale utente

Gateway

Gateway FPD1520 Manuale utente

Furuno

Furuno Mu 120c Manuale utente

Asus

Asus VB171D - 17" LCD Monitor Manuale utente

Dell

Dell S2230MX Istruzioni utente

Philips

Philips 107C64 Manuale utente

Dell

Dell S2409WFP Manuale utente

EverFocus

EverFocus EN-7517E Manuale utente

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manuale utente

Dell

Dell Precision 7680 Manuale di istruzioni

LG 50PM1M - - 50" Plasma Panel Manuale utente

Bosch

Bosch DDU 9 Manuale utente

Acer

Acer A231HL Manuale utente

Philips

Philips 86BDL4152T Manuale utente

NEC

NEC AccuSync LCD5V Manuale utente

Emay

Emay SleepO2 Manuale utente

IBM

IBM 6360 Istruzioni per l'installazione