Barox PS-DIN-DC24/48/72 Manuale utente
User Manual: PS-DIN-DC24/48/72
Booster
Version 4.2020
Page 2/6
Introduction
This Rugged design 72Watts Power Booster is a power device which boosts 24VDC up to 55VDC to
power up your PD for up to 72Watts. It is designed for environments where 48VDC power is not
available. With all industrial graded components, this industrial power booster will guarantee a steady
voltage output to your PD in a harsh environment. It has been rigorously tested for your security,
transportation and telco applications.
Installation package
This unit can be din-rail or wall mounted. Din-rail brackets and wall mount brackets are
included.
Page 3/6
Power connection
This unit provides a 4 pin terminal block. It can be operated using 24-56 VDC power source.
Always make sure your input voltage is within this supported voltage range.
To connect power: Follow the printed polarity for V+, V-. Connect positive wire to V+, connect
negative wire to V-.
Power connecting procedure:
Step1 － Pull out 4 pin terminal block.
Step2 － Connect wire to V IN+ and V IN- for VDC input power.
Step3 － Connect wire to V OUT+ and V OUT- for VDC output power.
Step4 － Plug back 4 pin terminal block to this connector.
WARNING -- Always SHUT OFF power source to connect power wire.
WARNING -- Any exceeded input voltage will not make this unit function and may
damage this unit.
Page 4/6
LED indicator
Voltage adjustable Knob –
Rotate the Knob clockwise to increase output
voltage from 48VDC to 55VDC
Rotate the Knob counterclockwise to decrease
output voltage from 55VDC to 48VDC
Power Connector
V IN – VDC Power Input
V OUT – VDC Power Output
PWR (Amber)
ON- power ready.
OFF – no power input
Page 5/6
Specifications
LED
PWR(Amber)
ON- power ready.
OFF – no power input
Overload current protection
Present
Removable Terminal Block /
Power Connector
4 pin terminal block.
2 pin for 24-56VDC Voltage input,
2 pin for 48 to 55 VDC Voltage output
Removable Terminal Block
Wire range: 0.34mm^2 to 2.5mm^2
Solid wire (AWG):12-24/14-22
Stranded wire (AWG): 12-24/14-22
Torque:5lb-In/0.5Nm/0.56Nm
Wire Strip length: 7-8mm
Voltage Adjustable Knob
To adjust voltage output from 55VDC to 36VDC to
meet your existing application
Booster Power
Maximum Booster power 72watts at 48VDC input
Operating Temperature
-40℃~75℃ fully tested.
Operating Humidity
5% to 95% (Non-condensing)
Storage Temperature
-40℃~85℃
Housing
Rugged Metal, IP30 Protection
Case Dimension (L X W X D) mm
59x36x49mm (LxWxD)
Installation mounting
DIN Rail and Wall Mount options included
Certifications
Safety
IEC EN60950-1
EMC/EMS
CE, FCC, VCCI
EMI
FCC Part 15 Subpart B Class A
EN 60068-2-6
Vibration
EN 60068-2-27
Shock
EN 60068-2-32
Free Fall
Page 6/6
Housing Dimension (mm)
Indice
Altri manuali Barox Estensione
