Bartec MAK 3003 Manuale utente
BARTEC BENKE GmbH Schulstraße 30 94239 Gotteszell Deutschland Phone +49(0)9929)-301-0 Telefax +49(0)9929)-301-112
E-Mail: gotteszell@bartec-benke.de Internet: www.bartec-benke.de
MAK 3003
EASI Ultrasampler Controller
Type 6970-31
Configuration
Software EASI 1.00
SAK 200311
MAK 3003 EASI Ultrasampler Controller Type 6970-31, Configuration, Software version EASI 1.00, SAK 200311
All rights reserved. Subject to change without prior notice.
No part of this document may be reproduced, processed or distributed
in any form or by any means without the prior written permission of
BARTEC BENKE
Copyright © 2020 by
BARTEC BENKE
Schulstraße 30
D-94239 Gotteszell
Contents
1
MAK 3003 EASI Ultrasampler Controller Type 6970-31, Configuration, Software version EASI 1.00, SAK 200311
Table of Contents
Contents Page
1About this manual__________________________________ 3
Signs and symbols __________________________________ 3
2Safety Precautions _________________________________ 4
3Basics____________________________________________ 5
3.1 Ultrasampler Controller EASI Type 6970-31 ______________ 5
3.1.1 Inputs ____________________________________________ 6
3.1.2 Display ___________________________________________ 6
3.2 Operating Concept __________________________________ 7
3.2.1 Operating the menus ________________________________ 7
3.2.1.1 Opening the menu __________________________________ 7
3.2.1.2 Editing parameters __________________________________ 8
Numerical entries ___________________________________ 8
3.2.2 Entering the password _______________________________ 9
4Menu____________________________________________ 10
4.1 System Info_______________________________________ 10
4.2 Diagnostic ________________________________________ 11
4.3 Configuration______________________________________ 12
4.3.1 Language ________________________________________ 13
4.3.2 Display __________________________________________ 13
4.3.3 Outputs __________________________________________ 14
Outputs in the Ultrasampler EASI______________________ 14
4.3.4 Inputs ___________________________________________ 14
Inputs in the Ultrasampler EASI _______________________ 14
4.3.5 Basic Settings _____________________________________ 15
4.3.6 Motor 1 __________________________________________ 16
4.3.7 Motor 2 __________________________________________ 16
4.3.8 Milk temp. limits____________________________________ 17
4.3.9 Cleaning _________________________________________ 18
4.4 Error overview_____________________________________ 19
5Appendix ________________________________________ 20
5.1 Overview of the Configuration menu____________________ 20
Contents
2
MAK 3003 EASI Ultrasampler Controller Type 6970-31, Configuration, Software version EASI 1.00, SAK 200311
Exclusion of liability
BARTEC BENKE GmbH and its vicarious agents only assume liability in the
case of deliberate acts or gross negligence. The extent of liability in such a
case is limited to the value of the order placed with BARTEC BENKE GmbH.
BARTEC BENKE accepts no liability for any damage resulting from non-ob-
servance of the safety regulations or from non-compliance with the operating
instructions or operating conditions. Secondary damage is excluded from the
liability.
EU-Declaration of
conformity
We,BARTEC BENKE GmbH, Schulstraße 30, D-94239 Gotteszell,hereby
declare, that this product is in compliance with the essential requirements of
the relevant EU-Directives
The EU-Declaration of conformity for this product can be obtained from
BARTEC BENKE GmbH, Schulstraße 30, D-94239 Gotteszell,
info@bartec-benke.de
About this manual
3
MAK 3003 EASI Ultrasampler Controller Type 6970-31, Configuration, Software version EASI 1.00, SAK 200311
1 About this manual
The operating instructions are part of the product and must be kept in the
immediate vicinity of the device. The personnel for assembly, operation and
maintenance must have access to it at all times.
The operating instructions contain important notes, safety instructions and test
certificates that are necessary for the correct functioning of the device during
operation. The operating instructions are intended for all persons involved in
the assembly, installation, commissioning and maintenance of the product.
The illustrations in this manual are intended to illustrate the information and
descriptions. They cannot always be transferred unchanged and may differ
slightly from the actual design of the device.
BARTEC GmbH reserves the right to make technical changes at any time.
BARTEC GmbH is under no circumstances responsible or liable for any indi-
rect or consequential damages resulting from the use, operation or application
of this user manual.
Please read the operating instructions carefully before using the
product.
Please note that the instructions must be kept by the user for the entire
life of the product.
Signs and symbols
The following characters and symbols are used in this manual to highlight
passages that need special attention.
Notes
This arrow indicates special features to be observed during operation.
Warning
This symbol draws your attention to passages that, if not followed or fol-
lowed inaccurately, may result in damage to or destruction of parts of the
system or loss of data.
Danger!
This symbol marks passages that, if not followed, endanger the health or
life of humans.
Special notes that appear within the text are marked with a frame.
Safety Precautions
4
MAK 3003 EASI Ultrasampler Controller Type 6970-31, Configuration, Software version EASI 1.00, SAK 200311
2 Safety Precautions
The system operator is responsible for all complying with all regulations appli-
cable to the storage, transport and handling of the food product "milk".
All regulations and provisions remain in full force when operating the system
with MAK devices.
MAK devices are built in compliance with applicable regulations and must
leave the factory in perfect condition. The devices must be installed and ser-
viced by qualified technicians.
Make sure that the information and operating conditions listed by the man-
ufacturer are followed.
Follow the instructions on operating and servicing the devices.
If you notice any damage or deterioration on parts of the system or if safe
operation is not ensured for other reasons, do not start up the system or
shut it off immediately. Notify your service point.
You should also contact our service technicians if you notify malfunctions
or defects during operation or have any doubts as to whether the devices
are working property.
The measuring system may only be operated for applications that are
subject to legal metrological control in the respective EU member state
if the nominal operating conditions specified in the EU-type examination
certificate are met.
Basics
5
MAK 3003 EASI Ultrasampler Controller Type 6970-31, Configuration, Software version EASI 1.00, SAK 200311
3 Basics
The Standalone control unit for sampling systems, is used for Control of two
sampler motors for the bottling of representative milk samples, including the
default quantities and optionally the processed measurement values of the
flow level meter.
Switching on the system and operating the vehicle system depend on the spe-
cific vehicle type and the operating instructions applicable thereto.
3.1 Ultrasampler Controller EASI Type
6970-31
During the intake tour, the schedule data can be entered on the Ultrasampler
controller.
The output signals of the Flowlevelmeter und des Milk sensor are recorded
and processed with temperature measurement.
1 Status indicators
2 Function keys
3 EASI-Wheel
4 OLED Display
1
3
2
4
Basics
6
MAK 3003 EASI Ultrasampler Controller Type 6970-31, Configuration, Software version EASI 1.00, SAK 200311
3.1.1 Inputs
The operation is done by the „EASI Wheel“, which is mounted below the dis-
play
The functions of the “EASI Wheel” are controlled by the software based on the
current operating status and can be used to select the menus and also to enter
numerical values.
To accept the numerical values entered and to exit the input dialog, use the
two buttons on the right side of the display.
By pressing the green button a menu can be called up or the entered value
confirmed. To exit a menu or discard the entered value, press the red button.
3.1.2 Display
An OLED-Display screen with 256x64 pixel is used to show all readouts.
Due to the high contrast of the OLED Display, it is easily recognizable even in
darkness and bright sunlight and very stable viewing angle.
Altri manuali per MAK 3003
1
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Bartec Controllori
Bartec
Bartec 07-3400 Series Guida rapida
Bartec
Bartec PETRODAT 3003 Manuale utente
Bartec
Bartec 05-0003-00 Series Manuale utente
Bartec
Bartec SILAS A7-3741-1110 Series Manuale utente
Bartec
Bartec EFSC Series Manuale utente
Bartec
Bartec Ex p Control Unit APEX Manuale utente
Bartec
Bartec SILAS A7-3741-1110 Series Manuale utente
