Bartell BR3570 Manuale utente
10/2013
04
OI-B09046
07/2014
BR3570
REVERSIBLE HYDRAULIC
PLATE COMPACTORS
Bartell Morrison Inc.
375 Annagem Blvd.
Mississauga, Ontario, Canada
L5T 3A7
Toll Free (N.A.): (866) 501-1683
Phone: (905) 364-4200
Facsimile: (905) 364-4201
www.bartellmorrison.com
Bartell Morrison (USA) LLC
200 Commerce Drive,
Freehold, New Jersey, USA
07728
Toll Free: 888-999-1570
Phone: (732) 566-5400
Facsimile: (732) 566-5444
www.bmiamerica.com
ORIGINAL LANGUAGE PARTS MANUAL FOR
REVERSIBLE HYDRAULIC PLATE COMPACTOR
© 2013 Bartell Morrison Inc.
No part of this work may be reporduced or transmitted in any
form or by any means, electronic, or mechanical, including
photocopying and recording, or by any information storage or
retrieval system without the prior written permission of Bartell
Morrison Inc, unless such copying is permitted by federal
copyright laws.
Address inquiries or reference permission care of:
Bartell Morrison Inc.,
375 Annagem Blvd.,
Mississauga, Ontario,
Canada, L5T 3A7
Revision Date Description Approved By:
00 10/2013 Initial Release AL
01 02/2014 Part number updated. AL
02 02/2014 Cover page updated. AL
03 06/2014 Updated Address AL
04 07/2014 Cover page updated. AL
SAFETY PRECAUTIONS
BR3570
OPERATOR’S MANUAL
BR3570
5
6
7
8
10
11
11
11
11
11
11
12
12
13
13
16
18
20
24
26
QUALITY ASSURANCE / MACHINE BREAK IN
WARRANTY INFORMATION
SPECIFICATIONS
PREVENTATIVE MAINTENANCE AND ROUTINE SERVICE PLAN
ROUTINE SERVICE INTERVALS
FOREWARD
SAFETY PRECAUTIONS
ASSEMBLY INSTRUCTIONS
OPERATING PRINCIPLE
STARTING PROCEDURE
STOPPING PROCEDURE
PRIOR TO OPERATION
OPERATION
MAINTENANCE
STORAGE
ASSEMBLY DRAWINGS AND PARTS LIST
- VIBRATING PLATE
- BODY
- VIBRATOR
- CONTROL
- HAND PUMP ASSEMBLY
QUALITY ASSURANCE / MACHINE BREAK IN
BR3570
The Bartell Vibratory Plate Compactor is the product of extensive engineering development de-
signed to give long life and unmatched performance. The Compactors are shipped completely assem-
bled with the exception of attaching the handle, and only require lling with fuel and a brief check of
lubricant levels in preparation for operation. The exciter housing are pre-serviced with oil at factory.
You can help ensure that your Vibratory Plate Compactor will perform at top levels by observing
a simple routing on rst use. Consider that your new Compactor is like a new car. Just as you would
break in a new car to the road or any new machine to the job, you should start gradually and build up
to full use. Learn what your machine can do and how it will respond. Refer to the engine manufactur-
er’s manual for run-in times. Full throttle and control may be used after this time period, as allowed by
material. This will serve to further break in the machine on your specic application, as well as provide
you with additional practice using the machine.
We thank you for the condence you have placed in us by purchasing a Bartell Vibratory Plate
Compactor and wish you many years of satised use.
5
WARRANTY
BR3570
Bartell agrees to furnish without charge, F.O.B. our plant, a replacement for any part or
portion thereof, comprising the main unit of the Bartell Vibratory Plate Compactor, consisting
of the exciter housing assembly, save and except drive belts, and power units, prove upon our
examination, to be defective in either material or workmanship within a period of twelve (12)
months from date of purchase, provided that notice of such defective part or portion thereof is
given to Bartell Ltd. within the twelve month warranty period. No further or other guarantee or
warranty expressed or implied in connection with the sale of the Compactor is given and our sole
liability consists in replacing defective parts or portions thereof. We shall not be responsible for
any special, indirect or consequential damages arising in any manner whatsoever.
This guarantee is for the sole benet of the original purchaser as end user. Our respon-
sibility under this guarantee ends in the case the original purchaser transfers ownership of the
Vibratory Plate Compactor, makes any changes or adds any parts or devices not of our manufac-
ture to the Compactor machine.
6
SPECIFICATIONS
BR3570
DIMENSIONS
OVERALL LENGTH, mm (in.) 1340 (53”)
OVERALL WIDTH, mm (in.) 450 (18”)
OVERALL HEIGHT, mm (in.) 960 (38”)
PLATE SIZE (WxL), mm (in.) 450x700 (18”x28”)
WEIGHT
NET WEIGHT, kg. (lb.) 240 (529)
OPERATING WEIGHT, kg. (lb) 250 (551)
PERFORMANCE
TRAVELING SPEED, m/min (ft/min) forward: 0~25 (0~82)
backward: 0~25 (0~82)
VIBRATING FREQUENCY, Hz (vpm) 87 (5200)
CENTRIFUGAL FORCE, (kN (kgf)) (35 (3570))
WATER TANK CAPACITY (L) 7871
POWER SOURCE
MANUFACTURER Honda/Robin/Yanmar
MODEL GX270/EX27/L70
MAX. OUTPUT 8.5 (6.3)/9(6.6)/5.8(4.3)
@ RPM 3600/4000/3600
FUEL TANK CAPACITY (L) 5.6 (5.3)/6.4(6.1)/2.9(2.7)
STARTING SYSTEM Recoil
7
PREVENTATIVE MAINTENANCE AND ROUTINE SERVICE PLAN
BR3570
This Bartell Vibratory Plate Compactor has been assembled with care and will provide years of
service. Preventative maintenance and routine service are essential to the long life of your Compactor
Machine. Your dealer is interested in your new machine and has the desire to help you get the most
value from it. After reading through this manual thoroughly, you will nd that you can do some of the
regular maintenance yourself. However, when in need of parts or major service be sure to see your
Bartell dealer. For your convenience we have provided this space to record relevant data about your
Vibratory Plate Compactor. When in need of parts or service be prepared to provide your Compactor
serial number. Locate the serial number now and record in the space below.
Date Purchased: Type of Machine:
Dealer Name: Model:
Dealer Phone: Serial Number:
Replacement Parts Used Maintenance Log
Part No. Quantity Cost Date Date Operation
8
ROUTINE SERVICE
BR3570
Routine Service
Intervals
Each
use
After 1.5
months
or
50 hrs
Each 3
months
or
100 hrs
Each 6
months
or
200 hrs
Each 9
months
or
300 hrs
Each 12
months
or
400 hrs
General Inspection:
Guards Check o o o o o
Check o o o o o
Check Operation o o o o o
Engine:
Engine Oil Check Level o o o o o o
Change o o o
Oil Cooler Clean o o o o
Cooling Fins Clean o o o o o
Air Cleaner Check - Clean o o o o o o
Replace o
Air Intake Line Check o
Replace 2 yrs
Fuel Filter Check & Clean o o o o
Replace o o
Fuel Tank Clean 500 hrs
Engine Wiring Check o
Exciter:
Exciter Oil Check Level o o o o o o
Change o o o
Drive Belt Check Tightness o o o o o o
Change o o
9
ROUTINE SERVICE INTERNALS
BR3570
Due to the nature and environment of use, plate compactors could be exposed to severe operating
conditions. Some general maintenance guidelines will extend the useful life of your machine.
•
•
•
•
•
•
The initial service for your compactor should be performed after 25 hours of use, at which time
your mechanic (or authorized repair shop) should complete all of the recommended checks in
the schedule above. The chart on page 6 (six) is handy for keeping a record of the maintenance
performed and the parts used for servicing your compactor.
Regular service according to the schedule above will prolong the life of the plate compactor and
prevent expensive repairs.
Keeping your plate compactor clean and free from debris is the single most important regular
maintenance operation, over and above the checks in the service schedule above, that can be
performed. After each use your compactor should be cleaned to remove any dust and debris from
the undercarriage and surrounding components. Use of a power washer will make clean up
quick and easy, especially if a non-stick coating was applied prior to use.
In the Service Schedule above, items that should be checked, replaced or adjusted are indicated
by “o” in the appropriate column. Not all plate compactor models include the same features and
options and as such not all service operations may have to be performed. For ease of recording
place a checkmark through the “o” when the item is complete. If an item is not required or not
completed place an“x” through the “o” in the box.
All compactors have governed engine speed of 3600 rpm. See engine manufacturer’s manual for
exact specications. Care should be used when making any adjustments to the compactor not to
change the governed speed. Running the engine at lower rpm’s will result in a decrease of com-
paction force and lower travel speed. It will create excessive“out-of-synch”vibrations resulting in
poor compaction, maneuverability, excessive wear to the machine, and discomfort to the operator.
Failure to have your vibratory plate compactor regularly serviced and properly maintained in ac-
cordance with the manufacturer’s instructions will lead to premature failure and void the warranty.
10
Indice
Altri manuali Bartell Utensili elettrici
