Thas different effects depending on how long it is pressed for:
a short press changes the display mode, in the sequence:
oclock and stopwatch displayed
oclock only displayed
ostopwatch only displayed
a medium press (more than 2 seconds) allows the display brightness to be changed -
use Bto increase the brightness from 0 (min) to 15 (max) one step at a time, or hold
down to continuously change the brightness
a long press (more than 5 seconds) will allow the clock to be set. Initially the hh
value will flash - use B(one press at a time or hold down) to increment hh. Press Tto
flash the mm value - use B(one press at a time or hold down) to increment mm.
Press Tto flash the ss value - use B(one press at a time or hold down) to increment
ss. Press Tagain to set the clock to the displayed value. Note that the clock stops to
allow accurate setting when Bis used to change the hh, mm or ss values.
Bcontrols the stopwatch (or is used for setting the brightness and clock - see above):
a short press will start the stopwatch
the next short press will pause the stopwatch display (although the stopwatch will
continue running in the background)
the next short press will restart the stopwatch display, with the displayed value
resuming at the time that the stopwatch has now reached
a medium press will reset the stopwatch to zero.
The optional remote unit connects to the RoamerTime via
the socket on the left hand side.
There are two buttons on the remote unit:
The black button at the top provides exactly the
same functions as the Tbutton
The red button at the bottom provides exactly the
same functions as the Bbutton.
