Batch Bicycles Cruiser Manuale utente

Crafted With Purpose TM

Batch Bicycles

8889 Gander Creek Dr.

Dayton, OH 45342

833.789.8899

batchbicycles.com

PLEASE VISIT YOUR AUTHORIZED BATCH RETAILER FOR

SERVICE AND QUESTIONS.

Crafted With Purpose TM

IBD-Cruiser EN 08-01-18 m0521

OWNER’S MANUAL

for Cruiser Bikes

Owner’sManualIndex

Safety and Warnings ...........................................................................................2-5

Assembly and Parts..............................................................................................6-15

Maintenance and Service ............................................................................ 16-21

Product ID Info.............................................................................................................22

Warranty .............................................................................................................................23

• Contact Information.............................................................Back Cover

This manual contains important safety, assembly, operation and

maintenance information.

Please read and fully understand this manual before operation.

Savethismanual for futurereference.

Alwayswear approved helmet and safety equipmentwhen using this

product.

BATCH Limited Warranty

We’ve Got You Covered

Batch Bicycles comes with our industry’sbest war-

ranty program – Batch Bicycles ServiceProgram.

Onceyour Batch Bicycleisregistered, Batch

Bicycles provides each original retail purchaser of a

Batch Bicycleawarranty against defects in materi-

alsand workmanship, as stated below:

General:

Partor model specicationsaresubjectto change

withoutnotice.

ThisLimited Warranty istheonly warranty for the

product. ALL WARRANTIES OTHER THAN STATED

HEREIN ARE DISCLAIMED INCLUDING IMPLIED

WARRANTIES OF MERCHANTABILITY AND FITNESS

FOR A PARTICULAR PURPOSE, TO THE EXTENT AL-

LOWABLE BY APPLICABLE LAW. ALL LIABILITY FOR

INCIDENTAL, PUNITIVE, SPECIAL, OR CONSEQUEN-

TIAL DAMAGES ARE EXPRESSLY DISCLAIMED, TO

THE EXTENT ALLOWABLE BY APPLICABLE LAW.

Theonly uses for thisproductaredescribed in this

manual.

In order to beeligiblefor serviceunder thisLimited

Warranty you MUST complete theon-linewarranty

registration within 30 daysof thedate of original

purchase of theproduct.

TheLimited Warranty extendsonly to theoriginal

consumer and isnottransferableto anyoneelse.

What does this Limited Warranty cover?

ThisLimited Warranty coversdefects in workman-

ship and materialsfor all parts of theproduct

exceptthose indicated below as notwarranted.

What must you do to keep the Limited Warranty

in eect?

This Limited Warranty is eective only if:

Productiscompletely and correctly assembled.

Productisused under normal conditionsfor its

intended purpose (see thefollowing section for

excluded activities).

Productreceives all necessary maintenanceand

adjustments.

Productisused for general transportation and

recreational use only.

What is not covered by this Limited Warranty?

Thisproductisdesigned for recreational use only.

ThisLimited Warranty does notcover normal

wear and tear, normal maintenanceitems, or any

damage, failure, or loss that iscaused by improper

assembly, maintenance, adjustment, storage, or

use of theproduct. Thislimited warranty does not

extend to futureperformance.

This Limited Warranty will be void if the prod-

uct is ever:

• Used in any competitivesport

• Used for stuntriding, jumping, aerobaticsor

similar activity

• Modied in any way

• Modied with theaddition of amotor

• Ridden by morethan oneperson at atime

• Rented, sold, or given away

• Used in amanner contrary to theinstructions

and warningsin thisOwner’sManual

What will The Manufacturer do?

Manufacturer’ssoleand exclusiveobligation under

thisLimited Warranty isto repair and/or replace, at

its soleoption, any covered defectin workmanship

or materials.

How do you get service once you have regis-

tered your product for limited warranty cover-

age as described above?

Contactyour authorized Batch Bicycles retailer.

What rights do you have?

ThisLimited Warranty gives you speci

c legal

rights. You may also haveother rights which vary

from State to State.

For how long does this Limited Warranty last?

• Steel rigid fork: Lifetimewhen owned by the

original retail purchaser.

• Aluminum Frame: Lifetimewhen owned by the

original retail purchaser.

• Any other original partor componentshall be

covered by thestated warranty of theoriginal

manufacturer. Any products notspecically

included abovearehereby omitted.

• All Batch Bicycleparts and accessories: 1 year

• All timeframes stated in thisLimited War-

ranty aremeasured from date of original retail

purchase.

When used in thisLimited Warranty, “Lifetime”

meansfor as long as theoriginal retail purchaser

ownstheproduct.

Warranty

Owner’s Bicycle Identication Record

NOTE: Thisinformation isonly availableon thebicycleitself.

Each bicyclehas aRecovery Codestamped

into theframe. TheRecovery Codecan

befound on thebottom of thecrank hous-

ing as shown.

Write thisnumber below to keep itfor future

reference.

If thebicycleisstolen, givethisnumber and

adescription of thebicycleto thepolice.

Thiswill help them nd thebicycle.

Recovery Code:

Purchase Date:

Model Name:

Product ID Info

To determine the correct size of bicycle for the rider:

• Straddletheassembled bicyclewith feet shoulder width

apartand at on theground.

• Theremust beat least 1 inch (2.5 cm) of clearance

between thehighest partof thetop tubeand the

crotch of therider with tires properly inated.

• Theminimum leg-length for therider isthehighest

partof thetop tubeplusoneinch .

• NOTE: See Assembly sectionsfor Seat adjustment.

Fitting the Rider to the Bicycle

Your Bike

IMPORTANT!! Read All Warning And Safety Information

Helmet Warning Information

WARNING:

ALWAYS WEAR YOUR HELMET

WHEN RIDING THIS PRODUCT!

• Helmet should sitlevel on your head and low on your fore-

head. Exposed forehead can resultin seriousinjury.

• Adjust thestrap slidersbelow theear on both sides.

• Bucklethechin strap. Adjust strap until itissnug.

• No morethan two ngersshould tbetween thestrap and

your chin.

• A proper tting helmet should becomfortableand notrock

forward/backward or sideto side.

Warning and Safety Information

The Owner’s Responsibility

WARNING: Thisbicycleismadeto beridden by onerider at atimefor general

transportation and recreational use. Itisnotmadeto withstand theabuse of stunting and

jumping.

If thebicyclewas purchased unassembled, itistheowner’sresponsibility to follow all as-

sembly and adjustmentinstructionsexactly as written in thismanual, and any “Special In-

structions” supplied and to makesureall fastenersand components aresecurely tightened.

NOTE: Periodically check that all fastenersand components aresecurely tightened.

If thebicyclewas purchased assembled, itistheowner’sresponsibility, beforeriding the

bicyclefor therst time, to makesurethebicyclehas been assembled and adjusted ex-

actly as written in thismanual, and any “Special Instructions” supplied and to makesureall

fastenersand components aresecurely tightened.

NOTE:

If product is assembled, please proceed to sections:

• Testing Stem, Handlebar

• Seat Clamp tightness.

MEANINGS OF WARNINGS:

Thissymbol isimportant. See theword “CAUTION” or “WARNING” which followsit.

Theword “CAUTION” isbeforemechanical instructions. If you do notobey these instruc-

tions, mechanical damageor failureof apartof thebicyclecan occur.

Theword “WARNING” isbeforepersonal safety instructions. If you do notobey these in-

structions, injury to therider or to otherscan occur.

• CHOKING HAZARD. Small parts. Notfor children under 3 years.

• Adultassembly isrequired.

• Handlebar hand grip or tubeend plugsshould bereplaced if damaged as baretubes have

been known to cause injury. All products with capped handlebar endsshould bechecked

regularly to ensurethat adequate protection for theendsof thehandlebarsarein place.

• Replacementforksmust havethesamerakeand tubeinner diameter as theoriginal

product.

• Do notadd amotor to theproduct.

• Do nottow or push theproduct.

• Do notmodify theproduct.

• Replaceworn or broken parts immediately with original equipment.

• If anything does notoperate properly, discontinueuse.

Warning and Safety

Inspection of the Bearings

Maintenance

Frequently check thebearingsof thebicycle. Haveabicycleserviceshop lubricate the

bearingsonceayear or any timethey do notpass thefollowing tests:

Head Tube Bearings

Thefork should turn freely and smoothly at all times. With thefrontwheel o theground,

you should notbeableto movethefork up, down, or side-to-sidein thehead tube.

Crank Bearings

Thecrank should turn freely and smoothly at all times and thefrontsprockets should not

beloose on thecrank. You should notbeableto movethepedal end of thecrank from

side-to-side.

Wheel Bearings

Lifteach end of thebicycleo theground and slowly spin theraised wheel by hand. The

bearingsarecorrectly adjusted if:

• Thewheel spinsfreely and easily.

• Theweightof thespokereector, when you putittoward thefrontor rear of the

bicycle, causes thewheel to spin back and forth several times.

• Thereisno side-to-sidemovementat thewheel rim when you push itto thesidewith

lightforce.

Maintenance

Tires

Maintenance:

• Frequently check thetireination pressurebecause all tires lose air slowly over time. For

extended storage, keep weighto of thetires.

• Do notuse unregulated air hoses to inate thetire/tubes. An unregulated hose can sud-

denly over inate tires and cause them to burst.

• Replaceworn tires.

WARNING:Do notrideor siton

theunitif atireisunder inated. Thiscan

damagethetire, inner tubeand rim.

Inating the Tires:

• Use ahand or afootpump to inate the

tires.

• Servicestation meter-regulated air hoses

arealso acceptable.

• Themaximum ination pressureisshown on thetiresidewall.

• If two ination pressures areon thetiresidewall, use thehigher pressurefor on-road riding

and thelower pressurefor o-road riding.

• Thelower pressurewill providebetter tiretraction and amorecomfortableride.

Beforeadding air to any tire, makesuretheedgeof thetire(thebead) isthesamedistance

from therim, all around therim, on both sides of thetireA. If thetiredoes notappear to be

seated correctly, release air from theinner tubeuntil you can push thebead of thetireinto

therim wherenecessary. Add air slowly and stop frequently to check thetireseating and the

pressure, until you reach thecorrectination pressure.

Maintenance

Rules of the Road

WARNING: Failureof therider to obey thefollowing “Rules of theRoad” can

resultin injury to therider or to others.

• Obey all trac regulations, signs, and signals.

• Alwayswear abicyclehelmet that meets safety standards, as well as local safety standards.

• Rideon thecorrectsideof theroad, in asinglele, and in astraightline.

• If possible, avoid riding at night, dusk, dawn and any other timeof poor visibility.

• If you must ride at night or at time of poor visibility:

• Purchase, install, and use aheadlightand taillight.

• Headlights arerequired by all states for nighttimeriding and taillights arerequired in

somestates.

• Battery-powered lights or ashing safety lights arealso recommended.

• Reectors: For your own safety, do notridethebicycleif thereectorsareincorrectly

installed, damaged, or missing. Makesurethefrontand rear reectorsarevertical. Do not

allow thevisibility of thereectorsto beblocked by clothing or other articles. Dirty reec-

torsdo notwork well. Clean thereectors, as necessary, with soap and adamp cloth.

• Makeyourself morevisibleto motorists.

• Wear light-colored or reectiveclothing, such as areectivevest and reectivebands

for your armsand legs.

• Use reectivetapeon your helmet.

• Do notlet anything cover thereectors.

• Use extra caution in wet weather:

• Rideslowly on damp surfaces because thetires will slidemoreeasily.

• Allow increased braking distancein wet weather.

• Avoid these hazards to prevent loss of control or damage to your wheels:

• Beawareof drain grates, softroad edges, gravel or sand, potholes or ruts, wet leaves, or

uneven paving.

• Cross railroad tracksat arightangleto preventtheloss of control.

• Avoid unsafeactionswhileriding.

• Do notcarry any passengers.

• Do notcarry any itemsor attach anything to your bicyclethat could hinder your vision,

hearing, or control.

• Do notridewith both handso thehandlebar.

• Do notadd amotor to theproduct.

• Do nottow or push theproduct.

• Do notmodify theproduct.

• Replaceworn or broken parts immediately with original equipment.

• If anything does notoperate properly, discontinueuse.

Warning and Safety

19 10

4 5

Parts Assembly View

Parts View

NOTE: All features, components

and accessories arenotincluded

on all models.

Maintenance

Chain Adjustment

WARNING:

• Thechain must remain on thesprock-

ets. If thechain comes o thesprock-

ets, thecoaster brakewill notoperate.

• Do notattemptchain repairs. If there

isaproblem with thechain, havea

bicycleserviceshop makeany repairs.

Adjustment:

Thechain must beat thecorrecttightness. If too tight, thebicyclewill bedicultto pedal.

If too loose, thechain can comeo thesprockets.

When thechain Cisat thecorrecttightness, you can rotate thecrank freely and you can

pull itno morethan one-half inch Aaway from astraightedgeBas shown.

Adjust the tightness of the chain as follows:

• Loosen theaxlenuts of therear wheel.

• Movetherear wheel forward or backward as necessary.

NOTE: Makesuretherear wheel isin thecenter of thebicycleframe.

• Hold thewheel in thisposition and tighten securely.

Maintenance

Coaster Brakes

These modelsareequipped with arear

‘coaster’ brakethat isoperated by rotating the

crank backwards.

Operate thecoaster brakeas follows:

• Push thepedalsbackward to movethe

chain backward

• Thechain activates thecoaster brake

mechanism that isinsidetherear wheel

hub

• Asyou push thepedalsbackward with

increasing force, thebraking action of the

coaster brakeincreases.

Parts Assembly List

No. Description No. Description

1Frame16 Rear Fender

2FrontWheel Assembly 17 FrontReector

3FrontFender18Rear Reector

4Wheel Retainer (x2) 19 Pedal Set

5 AxleNut(x4) 20 Chain

6Fender BraceBolt(x4) 21 Fork

7Chain Guard 22 Tire(x2)

8FrontFender MountHardware23 Tube(x2)

9Rear Fender MountHardware24 Rear Wheel Assembly

10 Kickstand 25 Crank / Sprocket Set

11 GripsSet 26 Crank Bearings

12 Handlebar27Head Set Bearing

13 Handlebar Stem28Seat Post / Hardware

14 Seat

15 Seat Clamp Hardware

Parts List

Introduction to Assembly

ThisOwner’sManual ismadefor several dierentbicycles:

• Someillustrationsmay vary slightly from theactual product.

• Follow instructionscompletely.

• If thebicyclehas any parts that arenotdescribed in thismanual, look for separate “Special

Instructions” that aresupplied with thebicycle.

• Modelsmay havedierentaccessory itemssuch as bags, baskets, reectors, cup holders,

racks, etc.

• All features, components and accessories arenotincluded on all models.

• Use theIndex pageto locate specic sectionsof thismanual.

• Please read through thisentiremanual beforebeginning assembly or maintenance.

• If you arenotcondentwith assembling thisunit, refer to alocal bikeshop.

WARNING: Keep small parts away from children during assembly.

NOTE: All of thedirections(right, left, front, rear, etc.) in thismanual areas seen by therider

whileseated on thebicycle.

Do notdispose of thecarton and packaging until you complete theassembly of thebicycle.

Thiscan preventaccidentally discarding parts of thebicycle.

Assembly

Tools Needed (not included)

Adjustable Wrench Open-end Wrenches

Metric Allen Wrenches

Maintenance

Lubrication

WARNING:

• Do notover lubricate. If oil gets on thewheel rimsor thebrakeshoes, itwill reduce

brakeperformanceand alonger distanceto stop thebicyclewill benecessary. Injury to

therider or to otherscan occur.

• Thechain can throw excess oil onto thewheel rim. Wipeexcess oil o thechain.

• Keep all oil o thesurfaces of thepedalswhereyour feet rest.

• Using soap and hotwater, wash all oil o thewheel rims, thebrakeshoes, thepedals,

and thetires.

• Rinse with clean water and dry completely beforeyou ride.

• Using alightmachineoil (20W), lubricate thebicycleaccording to thefollowing table:

Lubrication Table (as equipped)

What When How

Pedalsevery six monthsPutfour dropsof oil wheretheaxles go into the

pedals.

Chain every six monthsPutonedrop of oil on each roller of thechain.

Wipeall excess oil o thechain.

Repair and Service

WARNING:

• Inspecttheproductfrequently. Failureto inspecttheproductand to makerepairsor

adjustments, as necessary, can resultin injury to therider or to others. Makesureall

parts arecorrectly assembled and adjusted as written in thismanual and any “Special

Instructions”.

• Immediately replaceany damaged, missing, or badly worn parts with original

equipment.

• Makesureall fastenersarecorrectly tightened as written in thismanual and any

“Special Instructions”. P arts that arenottightenough can belost or operate poorly. Over

tightened parts can bedamaged. Makesureany replacementfastenersarethecorrect

sizeand type.

NOTE: Haveabicycleserviceshop makeany repairsor adjustments for which you do not

havethecorrecttoolsor if theinstructionsin thismanual or any “Special Instructions” arenot

sucientfor you.

Maintenance

Assembly

Front Wheel Install:

WARNING:

• Do NOT use AxleNuts Awithoutserrationsto attach thefrontwheel.

• Ensurewheel spinsfreely withoutcontacting fork or fender.

• Failureto obey these stepscan allow thefrontwheel to loosen whileriding. Thiscan cause

injury to therider or to others.

1. If theAxleNuts Aarealready attached to thefrontwheel axle, begin by removing

them and Shoulder WashersBand set aside.

2. Set thewheel fully into thefrontfork Dropouts C

3. PlaceaShoulder Washer Bon each end of Axlewith small shoulder facing IN as shown.

4. Install AxleNuts Awith serrated surfacefacing IN.

5. With thewheel in thecenter of thefork and tighten both AxleNuts securely.

Assembly

Handlebar and Stem Installation

NOTE: Removeplastic Cap Cfrom theend of theStem D. Loosen Stem BoltEas

needed.

1. InserttheStem into theFork LocknutBup to thetop of theMIN-IN mark A.

2. Align theStem with thefronttireand tighten theStem BoltEsecurely (see Testing

Stem, nextsection)

3. If necessary, loosen theHandlebar Clamp Bolt/NutFand rotate Handlebar into a

comfortableriding position.

4. Tighten Handlebar Clamp Bolt/NutFsecurely so that Handlebar does notmovedur-

ing use.

WARNINGS:

• To preventsteering system damageand possibleloss of control, the“MIN-IN” (minimum

insertion) mark Aon thestem must bebelow thetop of theFork LocknutB.

• EnsuretheFork and Brakearepointing FORWARD beforeproceeding.

• Do notover tighten thestem bolt. Over tightening thestem boltcan damagethesteering

system and cause loss of control.

• If thehandlebar clamp in nottightenough, thehandlebar can slip in thestem. Thiscan

cause damageto thehandlebar or stem, and can cause loss of control.

Reector Installation (as equipped)

Reector Installation:

1. Position FRONT Reector Aso it

points straightforward.

2. Tighten Clamp Screw.

3. Position Seat Post Reector (if

equipped) Bso itpoints straight

backwards.

4. Tighten Clamp Screw.

NOTE: Do notover-tighten. Thiswill

damagetheClamp.

Assembly

Indice

Manuali Bicicletta popolari di altre marche

RAMBO

RAMBO R1000X2M-FF-BFD Manuale utente

Vermeiren

Vermeiren SAFARI Manuale utente

Velec

Velec A2/36V Manuale utente

Coswheel

Coswheel A-ONE Manuale utente

Betzold

Betzold 97869 Manuale utente

Cervélo

Cervélo S3 2019 Manuale utente

Tenways

Tenways AGO X Manuale utente

Festo

Festo EGSC-BS-KF Manuale elenco delle parti

Gio Electric

Gio Electric H1 Volt Manuale utente

GOGOBEST

GOGOBEST GM30 Manuale utente

DAHON

DAHON CIAO - 2009 Manuale utente

Aprimatic

Aprimatic ONDA 500 Guida rapida

MV Agusta

MV Agusta Lucky Explorer GRAVEL Manuale di istruzioni

Greyp

Greyp G6 Series Manuale utente

Babboe

Babboe Carve-E Manuale utente

Huka

Huka orthros Manuale utente

Xtracycle

Xtracycle Stoker 2021 Manuale utente

APRILIA

APRILIA DORSODURO 750 ABS 2015 Manuale utente