Customer Service: 800-500-9895
bathselect.com
5
Sensor Range
This machine can automatically adjust the inductive
range within 10 seconds of electrification. Don't use
inductor during this period in order for the inductor
to automatically adjust to a suitable inductive range.
Set Water Flow Time-Out
Low Battery Warning
When the batteries run low and the power falls
below 3.9V the sensor light will flicker to indicate the
batteries are running low and need replacing.
When the batteries are exhausted the sensor light
will not light up.
Water Efficient
When the users hands enter the sensing range, the
indicator light in the sensor will illuminate. Water
will flow out immediately until the user draws their
hands back from the sensor.
Installation overview
Sensor Faucet & Soap Dispenser Installation
Incorrect Installation
Keep sensor range adjustment
within 4 inches away from center
of spout. This can only be done
with optional remote control.
Installing electronic soap dispenser
& faucet with intersecting centerline
might lead to accidental activation
of either or both.
Faucet FaucetSoap
Dispenser
Soap
Dispenser
Correct Installation
Keep sensor ranges
factory preset.
Keep soap spout & faucet
centerline parallel.
Faucet Faucet
Soap
Dispenser
Soap
Dispenser
The machine will shut off the water when washing
time exceeds 1.5 minutes foreign matter induces
continuously in inductive areal. If follow-up washing
is needed, re-induce after removing hands for 2
seconds.
Notes
1. Please use the AA type alkaline battery (1.5v for
each).
2. Fix the battery correctly. Should not be mix use the
batteries with different brands, the new and old and
if use non-alkaline battery, the battery life is short in
1-2 months.
3. After installation of the battery, the solenoid valve
will do its self-testing.
4. After providing the power, in 10sec, the machine
will self adjust the sensor distance, so during this
period, do not make it work.
5. If the sensor distance is short, please move away
the barrier for 5-6 mins, the machine will adjust to
normal.
6. If the sensor distance from far to near, and water
flows continuously, the machine will self-adjust the
distance after 5 mins.
