Batmatic CR5560 Manuale utente

CR5560 / CR5570 / CR5585

PLATE COMPACTOR

CR5560 / CR5570 / CR5585 R02

- 2 -

CR5560 / CR5570 / CR5585 R02

FOREWORD

We thank You to have chosen a Batmatic plate

compactor. Your ne machine is a useful and safety

job’s tool.

Observing the safety regulations and the instructions

in this book, there ill not be any physical injury and

the plate ill be al ays in good condition.

Worn-out machine parts have to be replaced as soon

as possible. You could find the code numbers to

order the spare parts in the chapter “Exploded

Vie s” in this instruction book.

- 3 -

CR5560 / CR5570 / CR5585 R02

TABLE OF CONTENTS

SAFETY INSTRUCTIONS FOR PLATE COMPACTORS................................................................5

GENERAL INSTRUCTIONS........................................................................................................................ 5

OPERATION................................................................................................................................................ 5

SAFETY....................................................................................................................................................... 5

TRANSPORT............................................................................................................................................... 6

MAINTENANCE........................................................................................................................................... 6

PERIODIC MAINTENANCE......................................................................................................................... 6

TECHNICAL DATA..........................................................................................................................7

SOUND MEASUREMENTS......................................................................................................................... 7

VIBRATION MEASUREMENTS................................................................................................................... 7

DIMENSIONS............................................................................................................................................... 8

CLIMBING ABILITY.........................................................................................................................9

FUNCTION....................................................................................................................................... 9

OPERATION.................................................................................................................................. 10

TO CHECK BEFORE STARTING..............................................................................................................10

ENGINE STARTING (MANUAL)................................................................................................................ 10

ENGINE STOPPING (MANUAL)................................................................................................................ 10

ENGINE STARTING (ELECTRIC STARTER)............................................................................................10

ENGINE STOPPING (ELECTRIC STARTER)........................................................................................... 10

ENGINE OIL............................................................................................................................................... 11

AIR FILTER (DRY)..................................................................................................................................... 11

AIR FILTER (OIL BATH)............................................................................................................................ 11

HYDRAULIC PUMP................................................................................................................................... 11

LUBRIFICANTS......................................................................................................................................... 12

ENGINE / EXCITER REVS........................................................................................................................ 12

MAINTENANCE.............................................................................................................................13

TROUBLESHOOTING...................................................................................................................1

EXPLODED VIEWS....................................................................................................................... 15

WARRANTY..................................................................................................................................30

EC DECLARATION OF CONFORMITY.........................................................................................31

- 4 -

CR5560 / CR5570 / CR5585 R02

SAFETY INSTRUCTIONS FOR PLATE COMPACTORS

GENERAL INSTRUCTIONS

1. Plate compactors must only be operated by person ho:

is at least 18 years old;

is physically and mentally fit for this job;

may be expected to carry out the job he’s charged ith carefully.

The employer must directly assign people ho guide plate compactor.

2. Plate compactors must only be used for compaction jobs observing safety and operating

instructions.

3. People ho ork ith plate compactors must kno everything regarding safety

instructions.

4. Al ays ear appropriate protective clothes (ear protections, gloves, protecting shoes and

helmet).

OPERATION

1. When You use recoil starter it is important to stand in a proper position near to the engine

and to hold tight the handle.

WARNING

Pull hand crank until it starts, in order to avoid counterblows.

2. Do not alterate the operation devices of the plate compactor.

3. Do not leave control elements during compaction.

4. Store the compactor in a safe place out of the reach of children.

5. Al ays refill fuel tank hen the engine is stopped. Do not allo fuel to come into contact

ith the hot parts of the compactor.

6. Do not smoke near the machine. Do not run the engine near open flames.

7. Al ays check fuel tank cap. If there is a fuel cock, shut it off hen the machine is stopped.

WARNING

If fuel tank leaks, replace it immediately: Do not run the machine if fuel tank

leaks.

8. Do not use the compactor in places here there are gaseous exhalations.

9. Do not use the machine indoors or in an enclosed area unless inadequate ventilation.

10. Al ays ear appropriate protective clothes.

11. When the ork area is near slopes, the compactor could turn over.

12. When you use compactor in reverse and in a narro place, the operator must be

side ays from the handle in order to avoid stumbling.

13. Al ays operate in safe conditions in order to avoid accidents.

14. Al ays operate in maximum stability conditions.

15. Use transport heels only for movements in yard. In all the other situations are to be

removed.

SAFETY

1. Plate compactors have to be used observing all safety regulations.

2. Al ays check all controls and safety devices.

3. If there are any problems, stop immediately the machine and inform the person

responsible of the yard.

- 5 -

CR5560 / CR5570 / CR5585 R02

TRANSPORT

1. For loading and unloading the compactor appropriate lifting-gear are necessary hich

have to be used on the lifting points.

2. Be sure that the ramps are fixed and check the tolerable eight in order to avoid

turnovers.

3. Tie the machine on vehicle to prevent sliding or tipping over.

4. For long transports, empty the fuel tank and close it completely.

WARNING

Do not lift or hook the plate compactor by the handle.

MAINTENANCE

1. Use only original spare parts.

2. Do not alterate the operation devices of the plate compactor.

3. Do not change the engine rpm.

WARNING

Modifications in this machine are subject to the express approval of Batmatic

hich in case of non observance ill refuse all liabilities.

4. Check the compactor hen the engine is s itched off.

5. As soon as maintenance and repair jobs have been completed, all safety devices have to

be properly reinstalled.

PERIODIC MAINTENANCE

Regular maintenance is required for a good performance of the compactor.

Please also observe regulations valid in Your yard.

- 6 -

CR5560 / CR5570 / CR5585 R02

TECHNICAL DATA

Item CR5560 CR5570 CR5585

Operating eight 400 kg

Size of base plate (W x L) 600 x 955 mm 700 x 955 mm 850 x 955 mm

Frequency 70 Hz

Po er transmission

Centrifugal force

Centrifugal clutch - Belt

55 kN

Engine

BH39 DL DH 0 DH50

Honda

GX 390

Lombardini

15LD440

Hatz

1 B40

Hatz

1 D50

Displacement 389 cm3441 cm3462 cm3517 cm3

Max Po er 9,6 kW

13,0 Hp

8,1 kW

11,0 Hp

7,4 kW

10,0 Hp

7,9 kW

10,7 Hp

Fuel Petrol Diesel Diesel Diesel

Travel speed 25 m/min

SOUND MEASUREMENTS

The product has been produced in accordance ith the standard 2000/14/CE, procedure I annex

VI.

Measured sound po er level 106 [dB(A)] and guaranteed sound po er level 108 [dB(A)] on a

significant equipment.

VIBRATION MEASUREMENTS

Products are tested for hand/arm vibration level in accordance ith annex D prEN500-4:2001

The hand/harm vibration level is ,5 m/s2

The plate compactor has been tested on a “macadam” surface, produced ith not cleaned stone

crusher grit, ith 16 mm medium diameter ( ith components hich have diameter that goes from

10 to 20 mm).

- 7 -

CR5560 / CR5570 / CR5585 R02

DIMENSIONS

- 8 -

CR5560 / CR5570 / CR5585 R02

CLIMBING ABILITY

FUNCTION

The vibration required for tamping is produced by the exciter hich is on the compacting plate.

The engine starts the exciter and the torque is transmitted by the centrifugal clutch and by the belt.

In order to allo the idling of the drive engine, the centrifugal clutch, at lo engine speeds,

interrupts the flo of po er to exciter. The compactor must al ays be used ith the gas handle in

the operative position.

The engine supporting and the compacting plates are connected by 4 shockmount, hich are

mounted to avoid that vibrations reach the operator.

Plate compactor is equipped ith hydraulic system that allo s to change gradually the for arding

speed.

The direction of plate compactor depends on the position of control levers on the handle.

- 9 -

CR5560 / CR5570 / CR5585 R02

OPERATION

TO CHECK BEFORE STARTING

1. Engine oil level

Check oil level using the proper dipstick. If it is necessary refill ith SAE 15 W 40 oil.

2. Air filter

Check if air filter is clean and in good condition. If it is necessary clean or replace it.

3. Fuel

Never use oil/gasoline mixture or dirty fuel. Avoid getting dirt, dust or ater into fuel tank.

Refuel avoiding leaks on engine.

ENGINE STARTING (MANUAL)

1. Open the fuel valve.

2. Move the throttle lever to 3/4 position.

3. Turn the choke lever (if present).

4. Turn the engine s itch on the ON position.

5. Pull the starter grip lightly until resistance is felt, then pull briskly.

6. As the engine arms up, gradually move the choke lever (if present).

7. Warm up the engine at the minimum speed for some minutes.

8. The compactor ill begin to move hen the throttle lever ill be in operative position.

ENGINE STOPPING (MANUAL)

1. Move the throttle lever to the minimum position. Let the engine turn at the minimum speed

for some minutes.

2. Turn the engine s itch on the OFF position.

WARNING

Never operate the engine switch when the engine is at the ma imum speed.

3. Turn the fuel valve to the OFF position.

ENGINE STARTING (ELECTRIC STARTER)

1. Insert the key into the dashboard.

2. Turn the key on the ON position and after on the START position until the engine starts.

ENGINE STOPPING (ELECTRIC STARTER)

1. Move the throttle lever to the minimum position. Let the engine turn at the minimum speed

for some minutes.

2. Turn the key on the OFF position.

WARNING

Never operate the engine switch when the engine is at the ma imum speed.

3. Turn the fuel valve to the OFF position.

- 10 -

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Batmatic Utensili elettrici

Batmatic

Batmatic CBH1450 Manuale utente

Manuali Utensili elettrici popolari di altre marche

AEG

AEG OMNI-JS Manuale utente

SIP

SIP 01533 Manuale utente

Ribimex

Ribimex PRS499 Manuale utente

3M Fiber Optic Connector Crimp Tool Manuale utente

Ryobi

Ryobi P524 Manuale utente

ROJEK

ROJEK FSN 300A Manuale utente

Kemper

Kemper 1740PRO Manuale utente

WABCO

WABCO OptiTire Manuale utente

EINHELL

EINHELL TE-MS 18/210 Li Manuale utente

Orgapack

Orgapack OR-T 85 Guida rapida

TOUGHCUT

TOUGHCUT Diamond 400 Manuale utente

Yaros

Yaros PB-3603 Manuale utente

Fein

Fein BSS 2.0 E Guida all'installazione

Baileigh Industrial

Baileigh Industrial SS-2725 Manuale utente

Milwaukee

Milwaukee 2674-20 Manuale utente

Fein

Fein BLs 1.6 Manuale utente

Princess

Princess Electric Multi Sharpener Manuale utente

FOREDOM

FOREDOM K.1050 Manuale