Batribike CONNECT+ Manuale utente

batribike.com
ELECTRIC BICYCLES
Owner
Manual
CONNECT+
CONTROL SYSTEM
Quality Design and Build

2
Thank you for purchasing a BATRIBIKE Electric Bicycle
The CONNECT+ control system fitted to your bicycle has been
designed and developed by our Danish partner Promovec.
Your bicycle can be operated with just the handlebar mounted
control / display or, to enhance your experience, you can access
additional features via your smartphone*.
You will need to dowload the app. either iOS or Android, please
search for Promovec Connect.
*If you choose to mount your smartphone on the handlebars you will
need a suitable bicycle phone holder - not supplied.
For the bicycle functions of your BATRIBIKE Electric Bicycle
please see separate manual.

3
Contents
Handlebar Control ......................................... PAGE 3
Handlebar Control Operation .......................... PAGE 4
Handlebar Battery Meter ................................. PAGE 6
Troubleshooting (LED flashes) ....................... PAGE 7
Extended Features - Using the App. .............. PAGE 8
App. Display .................................................. PAGE 10
Setting the Units & Wheel Size ...................... PAGE 11
Backlight (Android) ......................................... PAGE 13
Information Bar .............................................. PAGE 14
Assist Levels and Driving Mode ...................... PAGE 15
Map ................................................................ PAGE 21
Service Tab ................................................... PAGE 22
Wheel Size Data ............................................ PAGE 23
Handlebar Control
Battery Level indicator (Blue) &
Assist Level indicator (Green)
UP and DOWN buttons
ON / OFF

4
Handlebar Control Operation
To use under electric power, switch on at
the battery if required, (bike model specific),
then switch on by pressing and holding the
POWER button on the handlebar unit until
the display lights (blue).
Switching On
Control Buttons
By means of the UP and DOWN buttons on the handlebar
mounted display unit, the various functions of the power
controller can be utilised.
There are 5 levels of pedal assistance available from the
motor. Using the UP and DOWN buttons you can select from
Level 1 (Lowest), to Level 5 (Highest). The motor will
then be activated upon pedalling.
The GREEN LEDs will light when the UP and DOWN
buttons are pressed indicating the assistance level.
The LEDs will then return to BLUE showing the
battery meter, until pressed again.
For extended features see the section on using
the app.
Display LED Colours
The handlebar display utilises two different colour
LEDs for different functions.
Battery Meter BLUE Assistance Level GREEN
assistance
level 2
selected

5
To turn off the LED and the power to the bike, press and hold the
POWER button for 2 seconds.
If the power is left on for an extended
period and the bike is not used, then
the power will automatically be turned off.
To fully turn off the power, switch off at the battery if required,
(bike model specific).
Switching Off
Bicycle Lights
If your BATRIBIKE Electric Bicycle is supplied with lights on the
front and rear, then these are switched on by pressing and holding
the UP button on the handlebar display.
To turn the lights off, again press and hold the UP button.
If your BATRIBIKE bicycle has a Walk Assist
Mode (model specific) it is designed to propel
the bike under power at a low speed of 6 km/h
(4 MPH). Walk Assist is ideal to help you when
pushing the bike up steep hills. It is not
designed for prolonged use or whilst riding.
This feature only operates whilst the down
button is pressed.
Assisted Walking Mode (6 km/h)

6
Handlebar Battery Meter
Battery Meter
70%
to
100%
SYMBOL DISPLAYED
CHARGE REMAINING
BATTERY METER DISPLAYS THE CHARGE REMAINING IN THE BATTERY
BATTERY IS
EXHAUSTED AND
SHOULD BE
RECHARGED AS
SOON AS POSSIBLE
50%
to
70%
30%
to
50%
15%
to
30%
0
to
15%
EMPTY
OR
First
Light
Flashes
4 Times
The vertical row of BLUE LEDs show the
charge remaining in the battery. The indicators
will gradually go out as the battery power is
used up. Refer to the table below for details.
When the LEDs are GREEN they indicate
assistance level.

7
TROUBLESHOOTING
If the first LED in the battery indicator (blue) starts to flash,
this indicates that the system has detected an error. The
number of flashes determine the error code.
Diagnostic Error Messages
Number of
Flashes
Error
Type
Action
Required
1
Motor Error
Check Motor Plug, if all OK
Contact Dealer for Assistance
2
Controller Error
Contact Dealer for Assistance
3
Display Error
5
Brake Sensor Error
(if fitted)
6
Low Battery Voltage
Charge the Battery
Contact Dealer for Assistance
Check brake lever returns fully
and restart the system, if all OK
Contact Dealer for Assistance
4
7
8
9
10
11
Speed Sensor Error
Battery Error
High Current or
Overload
Communication Error
Battery Voltage
too High
Display Error
Contact Dealer for Assistance
Contact Dealer for Assistance
Contact Dealer for Assistance
Contact Dealer for Assistance
Contact Dealer for Assistance
Contact Dealer for Assistance

8
Extended Features - Using the App.
Connecting your smartphone to your BATRIBIKE Electric Bicycle
via Bluetooth, using the Promovec app will give a range of
additional features including
- Current Speed
- Trip Distance
- Different Driving Modes
- Battery Status
Additionally the phone can be used as a
display to control your bike*.
*If you choose to mount your smartphone on
the handlebars you will need a suitable
bicycle phone holder - not supplied.
Features
Download the app.
You will need to dowload the app. either iOS or Android. Requires
iOS 10.2 or later, or Requires Android 4.4 or later
Please search for Promovec Connect
Alternatively use these links
iOS -https://apps.apple.com/dk/app/promovec-connect/
id1458723615?l=da
Android -https://play.google.com/store/apps/details?
id=com.ektos.e.bike.client

9
Connecting to Your Bike
Open the app and allow connection to
Bluetooth.
Switch on your bike using the handlebar
display
Make sure any other nearby bikes with
connect+ are switched off.
Press New Bike on your phone and the phone
will search for your bike.
Select the located bike. You can now change
the name of the bike to one you choose,
before pressing ADD.
Your bike will now appear on your Bike List.
(You can have more than one bike on your
app.) To add another bike repeat the steps above.

10
App. Display
Select your bike from the list.
The app. will connect to the selected bike. All the features on the
app. are now available.
Battery
Charge level
Assist Up
Assist Level
Driving Mode
Settings
Map options
Assist Down
Settings
Speed
Speed/distance units
mph or km/h
Return to this screen
(home)
Light switch and
indicator
(where fitted)
Back
Information bar
Power Meter
Indice
Altri manuali Batribike Accessori per biciclette


















