BaudTec AS560USB Manuale utente
7435-0B37-01
V.92
56KUSBModem
56KUSBModem
Quick Installation Guide
AS560USB
1
System Requirements
•Computer with Pentium 200 MMX or higher processor.
•Windows 98/98SE/ME/2000/ XP and Vista Operating System.
•20 MB Hard Disk free space or above
•Sound card for voice features
•1 available USB port.
•CD-ROM drive.
Package Includes
The box contains the following items:
zOne 56Kbps USB Modem
zOne RJ11 Phone Line Cable
zOne USB cable
zOne Utility CD with Drivers and User's Manual
zOne Quick Installation Guide
If any of these items are missing or damaged, please contact your dealer
or sales representative for assistance.
AS560USB
2
Hardware Setup
This chapter contains detailed instructions how to install and
configure the 56Kbps USB modem, as well as how to verify if your
installation is correct. We recommend that you follow the steps
accordingly to avoid future problems.
ESD Precautions
Electrostatic discharge (ESD) can damage your processor, disk drives,
expansion boards, and other system components. Always observe the
following precautions before you install any system component.
1. Do not remove a component from its protective packaging until you
are ready to install it.
2. Wear a wrist grounding strap and attach it to a metal part of the
system unit before handling components. If a wrist strap is not
available, maintain contact with the system unit throughout any
procedure requiring ESD protection.
Installing the 56Kbps USB Modem
1. Turn off the System and unplug the AC power supply from the
system.
2. Please connect USB modem and PC with USB cable.
3. Please connect 56Kbps USB modem to the telephone line and
telephone set, as following procedures.
AS560USB
3
a. Locate an available RJ-11 modular jack telephone outlet.
b. Insert one end of the modular cord that came with your
USB 56Kbps modem into the RJ-11 modular jack marked
“LINE” on the modem. Then plug the other end into the
modular jack on wall outlet. See below Figure.
c. Plug the RJ-11 jack of the telephone set into the RJ-11
jack marked “PHONE” on the modem, if required. See
below figure.
d. If telephone set connected with 56Kbps USB modem via a
telephone cord, life the telephone handset, and check for a
dial tone.
AS560USB
4
Configure the Modem on Win9X / WinME / Win2000 /
WinXP / Win Vista
1. Please turn on your computer.
2. As Windows 98SE/2000/ME/XP/Vista starts, it will detect a new
hardware has been plugged or added, and start the “Add New
Hardware Wizard” Click on Cancel.
3. Please insert the USB 56Kbps modem Utility CD into your
CD-ROM driver.
4. The CD should auto-start, displaying the following windows. If it
does not start properly, please click on Start – Run and type in
CD:\autorun.exe (where CD is as the location of the CD-ROM
driver) .
5. Please select “ Install Modem Driver”
AS560USB
5
6. Please select “OK”.
7. Click “Continue Anyway“ to finish the installation.
(98SE/ME/2000 USER, please skip this step)
Installing FaxTalk Communicator
FaxTalk Communicator SE 4.7 integrates advanced fax, voice
messaging, and speakerphone capabilities into a single application and
includes support for TAPI, OLE, Distinctive Ring, Caller ID, and Windows
dialing properties. FaxTalk Communicator is designed to mimic a
standard answering machine, and adds the convenience of multiple
mailboxes.
Distribution: OEM License
Operating Systems Supported: Windows 98, Me, 2000, XP, Vista
Authors Website: http://www.faxtalk.com
Authors Support: http://www.faxtalk.com
AS560USB
6
1. To install the FaxTalk software you will need to run the
Utility CD and click on Install Software Utilities, then click
on FaxTalk SE to start the installation
2. Follow the onscreen instructions and once setup is
complete you will need to run the program from ÆStart Æ
All Program ÆFaxTalk Communicator in order for the
software to perform fax functions
Note: - If you can not perform these procedures smoothly as above,
please perform the file directly:
CD:\Autorun.exe
(Where CD is the drive letter of your CD-ROM drive)
Indice
Altri manuali BaudTec Modem
