Bauhn BW05003-3 Manuale utente
INSTRUCTION MANUAL
Model Number: BW05003-3
Tablet Bluetooth Keyboard
and Case for iPad
After Sales Support
Telephone: 1 866 235 5029
Email: [email protected]
2
Welcome 3
General Safety Instructions 4
Parts List 5
Features 6
Getting Started 7
Instructions 8
Other Useful Information 10
Repair and Refurbished Goods or Parts Notice 12
Contents
3
Welcome
Congratulations on choosing to buy a BAUHN®product.
All products brought to you by BAUHN®are manufactured to the highest standards
of performance and safety and, as part of our philosophy of customer service and
satisfaction, are backed by our comprehensive 2 Year Warranty. We hope you will enjoy
using your purchase for many years to come.
4
General Safety Instructions
Read this manual thoroughly before first use, even if you are familiar with this type
of product. Keep the manual in a safe place for future reference, along with the
completed warranty card, purchase receipt and carton. If applicable, pass these
instructions on to the next owner of the appliance.
• In order to prevent environmental factors (dampness, dust, food, liquid etc.) harming
the Tablet Case and Bluetooth Keyboard (short: the product), only use it in a well
ventilated, clean and dry environment, away from excessive heat or moisture.
• Keep the product away from direct sunlight or heat sources.
• Only charge the product via the supplied USB cable. Do not charge it any other way.
• In case of damage, do not disassemble, repair or modify the product yourself.
Contact the after sales support line for advice on repair or replacement, or refer
servicing to qualified personnel only.
• This product is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the product by a
person responsible for their safety.
• Children should be supervised to ensure they do not play with the product.
• Keep the product away from sharp objects.
• Do not put any object on top of the product.
• Do not expose the product to microwaves.
• Do not twist or distort the keyboard.
• Keep the product away from oils, chemicals or any other organic liquids.
• Use water or alcohol based disinfectants for cleaning the silicone keyboard.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may
cause undesired operation
NOTE:
This equipment has been tested and found to comply with the limits for a Class B
digital device. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy, and if not installed and used in accordance with the
instructions, may cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on. In case of interference, try to correct
the interference by one of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult an experienced radio/TV technician, or contact our after sales support line
for help.
Modifications not expressly approved by the manufacturer could void the user’s
authority to operate the equipment under FCC rules.
5
Parts List
1
2
3
1 Holding frame for tablet
2 USB Charging cable
3 Keyboard
4 Bluetooth indicator light
5 Bluetooth connect button
6 Power indicator light
7 Power on/off switch
8 Charging interface
64 5 78
6
Features
Compatibility
The Bluetooth Keyboard can be connected to iPad 2, 3, 4 iPhone 3G, 3GS, 4, 4S, 5
and iPod Touch, iOS4.0 or later, Mobile Internet Devices (MID), Smartphones, PCs and
other bluetooth enabled devices. For other bluetooth enabled devices, please verify the
bluetooth standard and compatibility before attempting to connect to the keyboard.
NOTE: Depending on the operating system and version of the connected device,
some function keys may not work.
Features
* Bluetooth 3.0 interface with BROADCOM 20730 as main control chip
* WIDCOMM BTW Bluetooth technology, officially approved by Microsoft
* Stylish protective PU leather case with tablet display stand for easy viewing
* Lightweight, quiet keystroke design, dust-proof and spill-proof
* Energy saving keyboard with sleep mode
7
Getting Started
Before first use
• Unpack the product but keep all packaging materials until you have made sure
your new Tablet Bluetooth Keyboard and case is undamaged and in good working
order. Plastic wrapping can be a suffocation hazard for babies and young children,
so ensure all packaging materials are out of their reach.
• Inspect the USB cable for damage. Do not use the product if the product or the
USB cable have been damaged or are not working properly.
Charging
Before first use, the Bluetooth Keyboard needs to be charged. During use, a flashing
‘power’ light indicates that the battery power is low and the device needs recharging.
To charge/recharge the device:
Step 1: Connect the USB cable’s micro connection to the keyboard charging interface.
Step 2: Connect the USB cable’s regular connection to the computer’s USB interface.
Step 3: The green ‘charge’ indicator light will stay on when the keyboard is charging.
Once fully charged, the green indicator light will turn off.
Step 4: After you have finished charging, disconnect the USB cable, taking care not to
damage the USB interface.
Powering on/off
• Slide the Power On/Off switch to the ‘On’ position. The blue ‘Bluetooth’ and the
red ‘Power’ indictors will illuminate for 4–5 seconds and then go off.
• After use, always turn off the power to extend the battery life.
Slide the Power On/Off switch to the ‘Off’ position to power off.
Storage
• If you intend not to use the Bluetooth Keyboard for an extended time, make sure
it is fully charged before storing it away. Storing it with a depleted battery will
shorten the lifespan of the keyboard’s internal lithium battery.
8
Pairing the Bluetooth Keyboard with an iPad
The following instructions are for pairing the product with an iPad.
Step 1: Slide the Power On/Off switch to the ‘On’ position. The blue ‘Bluetooth’ and
the red ‘Power’ indictors will illuminate for 4–5 seconds and then go off.
Step 2: Press the ‘Connect’ button, the red ‘Power’ light will be on and the blue
‘Bluetooth’ light will start blinking. The Bluetooth Keyboard is now ready
for connection to your iPad.
Step 3: Turn on and unlock the iPad. In menu mode, press Settings --> General -->
Bluetooth --> Devices --> Bluetooth keyboard found. Click on the device to
pair with it.
Instructions
Connect button
Power switch
Select the Settings icon. Open the Bluetooth setting.
9
Step 4: Enter the password code displayed on the screen, then press the Enter key.
Step 5: Upon successful connection, the Bluetooth Keyboard will be listed as
“Connected”.
Instructions (Cont.)
The Bluetooth Keyboard will show up as
Bluetooth Keyboard “Not Paired”. Select.
You will now be prompted to enter a PIN
using your keyboard.
NOTE: Do not fold the cover of the Bluetooth Keyboard while it is still in use.
10
Other Useful Information
Troubleshooting guide
Unable to connect
1. Make sure the Bluetooth Keyboard is within its effective working range (32ft).
2. Make sure the Bluetooth Keyboard is still paired. If not, pair the units again.
3. If the Bluetooth Keyboard is connected to any other Bluetooth products, please
cancel, turn off the keyboard and pair again.
4. Check the battery power and recharge the unit, if necessary.
If none of the solutions offered above help you solve your problem, contact our after
sales support line for advice.
Indice
