Bauhn ASBBS-0421-B Manuale utente

User Manual

MODEL: ASBBS-0421-B, ASBBS-0421-S

2.1 Channel Soundbar

with Built-In Subwoofer

AFTER SALES SUPPORT

1300 886 649

[email protected]

MODEL: ASBBS-0421-B, ASBBS-0421-S PRODUCT CODE: 705473 04/2021

AUS

Welcome

Congratulations on your purchase!

This manual tells you all you need to know about using your new BAUHN®product.

Please take special note of any important safety and usage information presented with the symbol.

All products brought to you by BAUHN®are manufactured to the highest standards of performance and safety and,

as part of our philosophy of customer service and satisfaction, are backed by our comprehensive 1 Year Warranty.

Domestic use only: This product is intended for indoor domestic use only. It is not suitable for commercial, industrial

or outdoor use. Do not use this product for anything other that its intended purpose, and only use it as described in

this manual.

We hope you will enjoy using your purchase for many years to come.

Operation 18

General Operation 18

Input Modes 18

Bluetooth®19

Pairing Bluetooth®Devices 19

Bluetooth®Playback 20

Troubleshooting 21

Specications 23

Compliance and Responsible Disposal 24

Contents

Welcome 2

Unpack and Prepare 4

What's in the Box 4

Wall Mount Installation Kit 5

Installation 6

Wall Mounting Instructions 8

Connect to Power 10

Controls and Connections 11

Get to know your Soundbar 11

Buttons on the Soundbar 11

Rear Ports on the Soundbar 12

Remote Control 15

Setup 15

Using the Remote Control 16

Remote Overview 17

Warranty Information 25

Repair and Refurbished

Goods or Parts Notice 26

4 | UNPACK AND PREPARE

Before setting up your new Soundbar, check you have everything:

A. 2.1 Channel Soundbar

B. Remote Control

C. AAA Activ Energy Batteries (2)

D. 3.5mm Audio Cable

E. Optical Cable

F. Wall Mount Installation Kit

G. Power Adaptor

H. User Manual

I. Warranty Certificate

J. Quick Start Guide

K. General Safety Warnings

Unpack and Prepare

What's in the Box

You will need:

• Phillips-head screwdriver and a drill (for wall mount installation)

• HDMI Cable, if you want to set up and use HDMI CEC. (Otherwise you can use the included optical cable if you

don't use HDMI.)

D E

UNPACK AND PREPARE | 5

The illustration below shows the contents of the wall

mount installation kit. These are the parts you will need

if wall mounting your soundbar.

A. Plastic Anchors (2)

B. Long Screws (2)

Wall Mount Installation Kit

• Place the Soundbar on a level surface.

• Place the Soundbar away from any source that

may generate heat or vibrations.

• Make sure there is enough space around the

Soundbar for airflow.

• The remote control works up to 6 metres away

from the Soundbar.

• Unplug the Soundbar before cleaning it.

• Clean using a dry cloth only - do not use water

or chemicals.

• Use only the power supply provided.

• Keep liquid, children and pets away from the

Soundbar at all times.

6 | UNPACK AND PREPARE

Installation

This soundbar can sit free-standing on a surface, or it can be mounted to a wall.

Free-standing

Place on a secure, flat surface. Make sure the soundbar

is standing on its rubber pads (on the left and right sides

on the bottom of the soundbar) and no other area of the

bottom of soundbar is touching the surface.

UNPACK AND PREPARE | 7

Wall mounted

Wall mounting instructions are on the following pages.

• Wall-mounted installation must be carried out

by qualified personnel only. Incorrect assembly

can result in severe personal injury and property

damage! If you intend to install this product yourself,

you must check for installations such as electrical

wiring and plumbing, which may be hidden inside or

behind the wall.

• It is the installer’s responsibility to verify and confirm

that the wall will safely support the total load of the

soundbar and wall brackets.

• Additional tools (not included) are required for the

installation.

• Do not overtighten screws.

• Use an electronic stud finder to check the wall type

before drilling and mounting.

8 | UNPACK AND PREPARE

760mm

Wall Mounting Instructions

Use a pencil to make drill hole marks on the

wall for the anchors. Make sure the marks are

level before drilling. Use a 6mm bit and power

drill (not supplied) to drill holes on the marks.

UNPACK AND PREPARE | 9

Slide the soundbar onto the screws

which are fixed to the wall. Make sure

the soundbar is secure and attached

firmly to the wall.

Insert plastic anchors into the holes and push in

until they are flush with the wall. Drive the screws

into the plastic anchors and tighten until the

screw head is approximately 3mm from the wall.

10 | UNPACK AND PREPARE

Connect to Power

Make sure the soundbar is switched off at the power

outlet until you have finished connecting your cables.

Don't forget to plug in the

soundbar to the power outlet.

Leave the power switched off until

installation is finished.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Bauhn Sistema di altoparlanti

Manuali Sistema di altoparlanti popolari di altre marche

JVC

JVC CA-MXK5R Manuale utente

LG NB4532B Manuale utente

JVC

JVC CA-FSH100 Manuale utente

5Core

5Core Pro Series Manuale utente

EAW

EAW MQV1394e Manuale utente

Lynx

Lynx GXR-LA10A Manuale utente

iLive

iLive ITB066B Manuale utente

RDX

RDX QuickStation 4 Manuale utente

Electro-Voice

Electro-Voice S-122 Manuale utente

Sven

Sven SPS-619 GOLD Manuale utente

Pioneer

Pioneer CS-7070 Manuale utente

EAW

EAW UB82e Manuale utente

Sondpex

Sondpex Active Speaker System and Digital Music... Manuale utente

JVC

JVC NX-PN7 Manuale utente

Marshall Amplification

Marshall Amplification AR-DM61-BT Manuale utente

Yamaha

Yamaha NX-A01 - Speaker Sys Manuale utente

SE Audiotechnik

SE Audiotechnik I-LINE Manuale utente

Gemini

Gemini WRX-843 Series Manuale utente