Bavaria Yachts 301 Manuale utente

Edition: 12/2006

Instruction Manual

for Operating Panel

301 and 302

2Edition: 12/2006

Contents

Edition: 12/2006

1 Introduction and Overview. . . . . . . . . . . . . . . . . . . . . . . . 5

1.1 Panel 301 Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

1.1.1 Function Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

1.1.2 Lighting Buttons. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

1.2 Menu Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

1.2.1 Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

1.2.2 Alarms. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

1.3 Overview of Panel 302 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

1.3.1 Warning Symbols on Panel 302 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

2 Electrical Connections. . . . . . . . . . . . . . . . . . . . . . . . . . 15

2.1 Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

2.2 Rear View of Panel 301 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

2.2.1 Terminal Assignment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

2.3 Rear View of Panel 302 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

2.3.1 Terminal Assignment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

2.4 Circuit Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

4Edition: 12/2006

Edition: 12/2006

Introduction and Overview

1 Introduction and Overview

Two panels are available for the operation and power supply. Panel 301 is designed for central

monitoring and control of all electrical functions on board the yacht. Panel 302 supplies the 230V

devices with power when there is a land connection. 1

Fig. 1 Overview - panel 301/302

Key

(1) Panel 301 (2) Panel 302

6Introduction and Overview

Edition: 12/2006

1.1 Panel 301 Controls

Fig. 2 Overview of panel 301

Key

The current status of the function and lighting buttons is shown by the respective LED. 1

(1) Display (2) Scroll and acknowledgment buttons

(3) Function buttons (4) Socket 12V/20A

(5) Lighting buttons 1

LED Status Meaning

Yellow LED on Button function is switched on

Yellow LED flashes Malfunction

Yellow LED off Button function is switched off

Edition: 12/2006

Introduction and Overview

1.1.1 Function Buttons

Button Description/Function

Compass

Switches the compass on and off. The button status is saved when the power

supply has been switched off and is kept until the power is switched back on

again.

Navigation

Switches the navigation device on and off. The button status is saved when

the power supply has been switched off and is kept until the power is

switched back on again. In the event of a malfunction, the yellow LED will

flash until the fault has been removed.

Radio

Switches the radio on and off. The button status is saved when the power

supply has been switched off and is kept until the power is switched back on

again. In the event of a malfunction, the yellow LED will flash until the fault

has been removed.

Anchor

Switches the anchor relay on and off. 1

The status of this button (ON/IOFF) is not stored after the power supply has

been switched off. When you switch on the power again, this function will

always be OFF.

NOTE:

For technical reasons, the LEWMAR windlass (type H3) can not be operated

via this button.

Bilge pump

Switches the bilge pump on and off. The button status is saved when the

power supply has been switched off and is kept until the power is switched

back on again. In the event of a malfunction, the yellow LED will flash until

the fault has been removed.

CAUTION:

Do not dry run the bilge pump!

Fresh water

Switches the fresh water pump on and off. The button status is saved when

the power supply has been switched off and is kept until the power is

switched back on again.

CAUTION:

Do not dry run the fresh water pump!

8Introduction and Overview

Edition: 12/2006

Waste water

Switches the waste water pump on and off. The button status is saved when

the power supply has been switched off and is kept until the power is

switched back on again.

CAUTION:

Do not dry run the waste water pump!

Panel

Switches the background lighting of the panel and display on. This

background lighting stays on for about 1 minute.

The background lighting of the panel and display lights up and then turns off

if you do not press either the up/down scroll button, the acknowledgment

button or the panel button, during this time.

Heating

Switches the heating pump on and off. The button status is saved when the

power supply has been switched off and is kept until the power is switched

back on again.

Fridge

Switches the fridge on and off. The button status is saved when the power

supply has been switched off and is kept until the power is switched back on

again. In the event of a malfunction, the yellow LED will flash until the fault

has been removed.

F1 to F5

Switches the reserve outputs on and off. These extra outputs are provided in

addition to the functions set by the shipyards and are reserved for the use of

otherequipment.Thebuttonstatusissaved whenthepowersupplyhasbeen

switched off and is kept until the power is switched back on again.

Button Description/Function

Edition: 12/2006

Introduction and Overview

1.1.2 Lighting Buttons

These buttons are used to switch the various lighting sources on and off. The button status is

saved when the power supply has been switched off and is kept until the power is switched back

on again. 1

Fig. 3 Detailed view of the lighting buttons

Outside lighting

The yellow LED will flash in the event of a malfunction. 1

–Stern

–Bow

– Steam

– Mast head

No function monitoring for: 1

– Deck flood

Inside lighting

– Cabin 1

– Cabin 2

10 Introduction and Overview

Edition: 12/2006

1.2 Menu Structure

This section describes how to access the various menu functions and how to change settings. 1

As soon as the panel is connected to the power source, a function test will be performed and the

LEDs will light up for approx. 1 second. After this, the panel is ready for operation. 1

Alarms will be shown when triggered. See also section 1.2.2. 1

After activating the main switch, you will see the following start screen on the display: 1

With the help of the scroll buttons and the acknowledgment button, you can select and view the

various information and menus. 1

You can now perform the required settings at the panel. 1

Button Description/Function

Scroll button - up

Navigates up the menu. 1

Scroll button - down

Navigates down the menu. 1

Acknowledgment button

Saves or confirms your entries. 1

BAVARIA YACHTS

Questo manuale è adatto per i seguenti modelli

Indice

Manuali Pannello di controllo popolari di altre marche

RDZ

RDZ PC-HRX Manuale utente

STG-BEIKIRCH

STG-BEIKIRCH MZ3 Manuale tecnico

Efka

Efka Variocontrol V810 Manuale utente

Cebora

Cebora 208-10 Manuale utente

AMX

AMX AutoPatch CP-15 Manuale utente

Satel

Satel CA-6 KLED-S Manuale utente

Evolution

Evolution IQ plus 800 Manuale utente

Fagor

Fagor 8040 TCO CNC Manuale utente

Trane

Trane ComfortLink II XL950 Control Manuale utente

AKO

AKO PROCool AKO-17635-2 Manuale utente

ABB

ABB 6136/30M-101 Manuale utente

Telikou

Telikou BK-603 Belt Pack Manuale utente

Mapei

Mapei Mapeheat Thermo Touch Manuale utente

Bosch

Bosch D9412GV4 Manuale utente

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SC-SL4-AE2/1 Manuale utente

Sminn

Sminn BOX L VF1L EI Manuale utente

Balboa

Balboa TP600 Manuale utente

Nice

Nice HSCU1 Specifiche tecniche