BCM EBC-5612 Series Manuale utente

Part No.

Quick Installation Guide

EBC-5612Series

All-in-One Tualatin Pentium III/Celeron Single Board

with LCD, LVDS, AC97 Audio, IEEE-1394,

Dual 10/100Base-Tx Ethernet Interfaces, & 4COMs

3rd Ed – 07 March 2003

EBC-5612 Series

2 EBC-5612 Series Quick Installation Guide

FCC STATEMENT

THIS DEVICE COMPLIES WITH PART 15 FCC RULES. OPERATION IS SUBJECT TO

THE FOLLOWING TWO CONDITIONS:

(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE.

(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE

RECEIVED INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED

OPERATION.

THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS

FOR A CLASS "A" DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES.

THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINTST

HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A

COMMERCIAL ENVIRONMENT. THIS EQUIPMENT GENERATES, USES, AND CAN

RADIATE RADIO FREQUENCY ENERGY AND, IF NOT INSTATLLED AND USED IN

ACCORDANCE WITH THE INSTRUCTION MANUAL, MAY CAUSE HARMFUL

INTERFERENCE TO RADIO COMMUNICATIONS.

OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS LIKELY TO CAUSE

HARMFUL INTERFERENCE IN WHICH CASE THE USER WILL BE REQUIRED TO

CORRECT THE INTERFERENCE AT HIS OWN EXPENSE.

Quick Installation Guide

EBC-5612 Series Quick Installation Guide 3

Notice:

This guide is designed for experienced users to setup the system within the shortest time.

For detailed information, please always refer to the electronic user's manual.

No part of this document may be reproduced, copied, translated, or transmitted in any form

or by any means, electronic or mechanical, for any purpose, without the prior written

permission of the original manufacturer.

Trademark Acknowledgement

Brand and product names are trademarks or registered trademarks of their respective

owners.

Disclaimer

BCM Advanced Research reserves the right to make changes, without notice, to any

product, including circuits and/or software described or contained in this manual in order to

improve design and/or performance. BCM Technology assumes no responsibility or liability

for the use of the described product(s), conveys no license or title under any patent,

warranties that these products are free from patent, copyright, or mask work right

infringement, unless otherwise specified. Applications that are described in this manual are

for illustration purposes only. BCM Advanced Research makes no representation or

warranty that such application will be suitable for the specified use without further testing or

modification.

EBC-5612 Series

4 EBC-5612 Series Quick Installation Guide

Life Support Policy

BCM PRODUCTS ARE NOT FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT

DEVICES OR SYSTEMS WITHOUT THE PRIOR WRITTEN APPROVAL OF BCM

Advanced Research

As used herein:

1. Life support devices or systems are devices or systems which, (a) are intended for

surgical implant into body, or (b) support or sustain life and whose failure to perform,

when properly used in accordance with instructions for use provided in the labeling, can

be reasonably expected to result in significant injury to the user.

2. A critical component is any component of a life support device or system whose failure to

perform can be reasonably expected to cause the failure of the life support device or

system, or to affect its safety or effectiveness.

A Message to the Customer

BCM Customer Services

Each and every BCM products is built to the most exacting specifications to ensure reliable

performance in the harsh and demanding conditions typical of industrial environments.

Whether your new BCM device is destined for the laboratory or the factory floor, you can be

assured that your product will provide the reliability and ease of operation for which the

name BCM has come to be known.

Your satisfaction is our primary concern. Here is a guide to BCM customer services. To

ensure you get the full benefit of our services, please follow the instructions below carefully.

Quick Installation Guide

EBC-5612 Series Quick Installation Guide 5

Technical Support

We want you to get the maximum performance from your products. So if you run into

technical difficulties, we are here to help. For the most frequently asked questions, you can

easily find answers in your product documentation. These answers are normally a lot more

detailed than the ones we can give over the phone. So please consult the user’s manual

first.

To receive the latest version of the user’s manual, please visit our Web site at:

http://www.bcmcom.com/

If you still cannot find the answer, gather all the information or questions that apply to your

problem, and with the product close at hand, call your dealer. Our dealers are well trained

and ready to give you the support you need to get the most from your BCM products. In fact,

most problems reported are minor and are able to be easily solved over the phone.

In addition, technical support is available from BCM engineers every business day. We are

always ready to give advice on application requirements or specific information on the

installation and operation of any of our products. Please do not hesitate to e-mail us.

BCM Advanced Research

1 Hughes,

Irvine, CA,

U.S.A.

Tel : 949-470-1888

Fax : 949-470-0971

http://www.bcmcom.com

E-mail: [email protected]

EBC-5612 Series

6 EBC-5612 Series Quick Installation Guide

Product Warranty

BCM warrants to you, the original purchaser, that each of its products will be free from

defects in materials and workmanship for one year from the date of purchase.

This warranty does not apply to any products which have been repaired or altered by

persons other than repair personnel authorized by BCM, or which have been subject to

misuse, abuse, accident or improper installation. BCM assumes no liability under the terms

of this warranty as a consequence of such events. Because of BCM high quality-control

standards and rigorous testing, most of our customers never need to use our repair service.

If any of BCM products is defective, it will be repaired or replaced at no charge during the

warranty period. For out-of-warranty repairs, you will be billed according to the cost of

replacement materials, service time, and freight. Please consult your dealer for more

details. If you think you have a defective product, follow these steps:

1. Collect all the information about the problem encountered. (For example, CPU type and

speed, BCM products model name, hardware & BIOS revision number, other hardware

and software used, etc.) Note anything abnormal and list any on-screen messages you

get when the problem occurs.

2. Call your dealer and describe the problem. Please have your manual, product, and any

helpful information available.

3. If your product is diagnosed as defective, obtain an RMA (return material authorization)

number from your dealer. This allows us to process your good return more quickly.

4. Carefully pack the defective product, a complete Repair and Replacement Order Card

and a photocopy proof of purchase date (such as your sales receipt) in a shippable

container. A product returned without proof of the purchase date is not eligible for

warranty service.

5. Write the RMA number visibly on the outside of the package and ship it prepaid to your

dealer.

Quick Installation Guide

EBC-5612 Series Quick Installation Guide 7

Packing List

Before you begin installing your single board, please make sure that the following materials

have been shipped:

 1 EBC-5612 series All-in-One Tualatin Pentium III/Celeron Computing Module

 1 Quick Installation Guide

 1 CD-ROM contains the followings:

— User’s Manual (this manual in PDF file)

— Ethernet driver and utilities

— VGA drivers and utilities

— Audio drivers and utilities

— Latest BIOS (as of the CD-ROM was made)

If any of these items are missing or damaged, please contact your distributor or sales

representative immediately.

1. Safety Precautions

1.1 Warning!

Always completely disconnect the power cord from your chassis whenever

you work with the hardware. Do not make connections while the power is on.

Sensitive electronic components can be damaged by sudden power surges.

Only experienced electronics personnel should open the PC chassis.

1.2 Caution!

Always ground yourself to remove any static charge before touching the CPU

card. Modern electronic devices are very sensitive to static electric charges.

As a safety precaution, use a grounding wrist strap at all times. Place all

electronic components in a static-dissipative surface or static-shielded bag

when they are not in the chassis.

EBC-5612 Series

8 EBC-5612 Series Quick Installation Guide

2. Jumper & Connector

2.1 Jumper & Connector Layout

Quick Installation Guide

EBC-5612 Series Quick Installation Guide 9

2.2 Jumper and Connector List

Connectors on the board are linked to external devices such as hard disk drives, a

keyboard, or floppy drives. In addition, the board has a number of jumpers that allow you to

configure your system to suit your application.

The following tables list the function of each of the board's jumpers and connectors.

Jumpers

Label Function Note

J1, J3 COM2 RS-232/422/485 select 4 x 3 header, pitch 2.0mm(J1)

3 x 2 header, pitch 2.0mm(J3)

J5 Clear CMOS 3 x 1 header, pitch 2.54mm

J6 COM3 pin 9 signal select 3 x 2 header, pitch 2.0mm

J7 COM4 pin 9 signal select 3 x 2 header, pitch 2.0mm

J9 AT / ATX power select 3 x 1 header, pitch 2.0mm

EBC-5612 Series

10 EBC-5612 Series Quick Installation Guide

Connectors

Label Function Note

CN1 Keyboard and PS/2 mouse connector 4 x 2 header, pitch 2.54mm

CN2 CPU fan connector 3 x 1 wafer, pitch 2.54mm

CN3, 4 PC/104 connector

CN5 IDE device connector 20 x 2 header, pitch 2.54mm

CN6 Front panel connector 4 x 2 header, pitch 2.54mm

CN7 Serial port 1 / 2 / 3 / 4 connector 20 x 2 header, pitch 2.54mm

CN8 CD-ROM audio input connector 4 x 1 wafer, pitch 2.0mm

CN9 Audio / TV output connector 8 x 2 header, pitch 2.54mm

CN10 Ethernet 1 / 2 LED connector 5 x 2 header, pitch 2.54mm

CN11 Primary LCD panel connector HIROSE DF13-40DP-1.25V

CN12 Secondary LCD panel connector HIROSE DF13-40DP-1.25V

CN14 Zoom Video port connector HIROSE DF13-20DP-1.25V

FLP1 Floppy connector 17 x 2 header, pitch 2.54mm

IR1 IrDA connector 3 x 2 header, pitch 2.0mm

J4 Power connector 3 x 1 wafer, pitch 2.54mm

J8 LCD inverter connector 5 x 1 wafer, pitch 2.0mm

LAN1 10/100Base-Tx Ethernet 1 connector RJ-45

LAN2 10/100Base-Tx Ethernet 2 connector RJ-45 (EBC-5612 only)

PCI1 PCI connector

PNT1 Printer port connector 13 x 2 header, pitch 2.54mm

PORT1 IEEE1394 port 1 connector

PORT2 IEEE 1394 port 2/3 connector 6 x 2 header, pitch 2.54mm

PWR1 Power connector AT power connector

SN1 Compact Flash connector

USB1 USB connector 5 x 2 header, pitch 2.0mm

VGA1 CRT connector 8 x 2 header, pitch 2.54mm

VR1 STN LCD contrast adjustment connector 3 x 1 header, pitch 2.54mm

VR2 LCD Backlight brightness adjustment

connector

3 x 1 header, pitch 2.54mm

DIM1 168-pin DIMM socket

Altri manuali BCM Hardware per computer

BCM

BCM SMA-X8I Manuale utente

BCM

BCM RX945GC Manuale utente

BCM

BCM EMS-TGL Manuale utente

BCM

BCM NUC-TGU Manuale utente

BCM

BCM Mini-ITX MX852GM-C6 Series Manuale utente

Manuali Hardware per computer popolari di altre marche

EMC2

EMC2 VNX Series Manuale del proprietario

Panasonic

Panasonic DV0PM20105 Manuale utente

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuale utente

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuale utente

Raidon

Raidon iT2300 Manuale utente

National Instruments

National Instruments PXI-8186 Manuale utente

Hauppauge

Hauppauge WinTV-HVR-2250 Manuale utente

Kontron

Kontron CP6002 Manuale utente

Manhattan

Manhattan 702843 Manuale utente

Aphex

Aphex 230 Manuale utente

AMD

AMD Phenom II Manuale operativo

Intel

Intel NUC 12 Pro Manuale utente

dbx

dbx Zone Pro 1260 Manuale utente

Galaxy

Galaxy GHDX2-2430S-24F4D Manuale utente

Intel

Intel AXXRMFBU4 Manuale utente

Kontron

Kontron DIMM-PC/MD Manuale utente

ST X-NUCLEO-SAFEA1B Istruzioni operative

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuale utente