BCP SKY 1785 Manuale utente
zSKU# SKY 1785 & SKY1819
ASSEMBLY MANUAL
Kids Battery Powered Ride On Motorcycle
The parts and hardware below have been included for assembly:
(E) Fender x 1
(I) Mount x 1
(C)Veiwnder x 1 (D)Handle Bars x 1(A) Windsheild x 1
(H) Dash x 1
(L) Hardware x 1
(F) Wheel x 1
(J) Trunk x 1
(G) Body x 1
(K) Seat x 1
(B) Mask x 1
Connect Windsheild to the
Mask. Use 2 small screws
to tighten.
Connect the Wheel to the
Handle Bars.
Attached the assembled
frontend in to the Body as
shown.
Connect Veiwnder to
the Mask as shown. Use
2 small screws to tighten.
Repeat for opposite side.
Connect the Handle bars
to the assembled Mask as
shown in the photo. Pull
wires through the square
opening as shown.
Use large bolt to tighten.
Attach Fender to the
Handle Bars. Use 2 small
screws to tighten on the
back.
Attach the wires together
Screw Trunk on the Trunk
Mount using two small
screws.
1
4
7
2
5
8
3
6
9
ASSEMBLY STEPS:
Snap on the seat. Press the pedal to make the
bike move.
10 11 12
ASSEMBLY STEPS CONT. :
E-MAIL US:
We’re here 7 days a week to help you!
customerservice@bestchoiceproducts.com
WARNING:
Manufacturer and seller expressly disclaim any and all liability for
personal injury, property damage or loss, whether direct, indirect, or
incidental, resulting from the incorrect attachment, improper use,
inadequate maintenance, or neglect of this product.
Questo manuale è adatto per i seguenti modelli
1
Altri manuali BCP Motociclo
